Correlation Meter (giving you information about the the mono compatibility of a stereo and a Surround signal) you also can make easily Phase Check with this tool...

Spectrum Analyzer pro Live  turns your computer into a modern, State-of-The-Art spectrum analyzer giving you features that go far beyond the possibilities of any stand-alone hardware unit.

An important advantage of your new analyzer software is the fact that your computer monitor is a far better means of displaying analyzer measurments than any LED or LCD bar. By making use of standard computer operations your analyzer software will store your personal settings or analyze audio data you may have previously recorded.

 

Here are some key features of "Spectrum Analyzer pro Live":

· Displaying in 1/3 Octave and FFT (31,2048 Bands)
· Decay settings (Display speed) for the Spectrum in the Octave Mode, the FFT Mode and one for the VU-Meters
· Big Window (to have a full screen of the spectrum) see screen shot...
· Multi Mode Support. Switch between 4 Stereo Devices easily with the Keys. So you can analyze the input for Alesis ADAT, 8 Track Recording and any Multi Channel recordings... EQ suggestion -for realtime and wave-mpeg modus
· Convert Wave files to Mp3 files settings from 32 up to 320 bit/sec
· Tap Delay calculator - display for quarter, half and full Beats
· improvement to calibrate the generator output
· Sound Check without a Band
· Phase Check

Limitations:

· The program will stop after 3 minutes
· No multi sound card selection
· No Mp3 / Wave Tools
· Generator not adjustable (only 1000 Hz)

What's New in This Release: [ read full changelog ]

· Level Balistic DIN 45406
· Musical notes detector
· 1/3, 1/6, 1/12, 1/24 Octave frequency displaying
· dBFS and RMS Peak Level Meter
· Weighting filters dB(A), dB(B) and dB(C)
· 48000 hz audio stream
· wide screen compatible
· Correlation percentaged labels
· Correlation Meter (giving you information about the the mono compatibility of a stereo and a Surround signal) you also can make easily Phase Check with this tool...
· Displaying in 1/3 Octave and FFT (31,2048 Bands)
· Decay settings (Display speed) for the Spectrum in the Octave Mode, the FFT Mode and one for the VU-Meters
· Big Window (to have a full screen of the spectrum) see screen shot...
· Multi Mode Support. Switch between 4 Stereo Devices easily with the Keys (Ctrl & F1 - Ctrl & F4). So you can analyze the input for Alesis ADAT, 8 Track Recording and any Multi Channel recordings...
· Use it like a DirectX Plugin with Wave Clone