Comport is the main utility in the ReMapPro package and it can easily make serial (RS232) data from your PC available on TCP/IP-based networks and TCP/IP data available on serial ports of your PC.

This makes it possible for any other computer on the same network to send and receive serial data through a remote serial port on the PC where the Comport is running. You can connect to the remote serial port by connecting to a TCP/IP port. The Comport can also be used to pass the serial data across a corporate intranet or over the Internet. The Comport allows multiple sessions to run simultaneously but each with a different serial port.

The Comport supports full two-way I/O for full control of serial instruments (i.e. any instrument that you can plug into the serial port Comport is the main utility in the ReMapPro package and it can easily make serial (RS232) data from your PC available on TCP/IP-based networks and TCP/IP data available on serial ports of your PC.Typical devices include most serial devices like gauges, scales and balances, sensors, micrometers, calipers, bar code scanners, densitometers, laboratory instruments, electronic balance or electronic measuring instrument, RF equipment, communication systems, etc...

Requirements:

· A standard 32-bit IBM PC (Pentium recommended) or 100% compatible
· Color graphics controller supporting SVGA video modes
· Mouse Unit compatible with Microsoft Windows
· Network adapter for Ethernet or Serial port connection
· 11 Mbytes free hard disk space.

Limitations:

· The package is free for a period of 90 days.