Optimik description
Optimik - Cutting optimize software - easy and quick !

If you need to cut or shear :

- Fibreboards ...
- Steel and stainless steel sheets ...
- Polycarbonate boards
- Glass panes
- And other square materials ...

and you spend hours of work and thinking in trying to achieve the most optimum arrangement of individual parts on the material sheet surface, imagine that you can spend this time by doing what you like the best or simply more efficiently.

Imagine at the same time, that all those small cut offs, which remained in your workshop or warehouse from previous jobs and there is hardly ever any further use for them now, would join into larger pieces and they would be used in next jobs. Certainly, you will have many ideas how to spend the money saved this way.

If you multiply these imaginations by an average 90-95% efficiency of arrangement of necessary parts in few seconds, then you get a general idea about the contribution and help provided by the Optimik program.

The goal of the Optimik program is to minimize the time required to design a cutting plan compared to ”manual” designs and increase the efficiency at the same time.

When creating a plan, it arranges the specified rectangular boards on as minimum number of material sheets as possible, whereas it also makes use of cut offs from previous jobs, identifies the waste as maximum usable cut offs and thus saves your time and money extensively.

Here are some key features of "Optimik":

· Record-keeping of the configuration sets
· Do you have many same configuration sets in your orders? Set them into the program only once and then you will be able to move them into the order always, when it is necessary.
·
· Do you need to put thousands of plates into OPTIMIK from another program? Does your program need lists of plates from the OPTIMIK? Export and Import of the plates will be enabled by the text file/editor.
· Unlimited recounts
· Thanks to the program you can set as many orders, plates, cut-offs and materials as you need.
· Unlimited correction and deletion possibilities
· Nobody is perfect! With OPTIMIK corrections and recounts done in a second.
· 100% utilization of the cut-offs
· Program preferably uses cut- offs from the record kept from the previous orders and it automatically adds and revises its record. You do not have to rush through the stock to find usable pieces of material any more; the program will find them instead of you!
· Fast and accurate planning
· Computing/calculating algorithm with optimalized speed will enable you in a while to design cutting plans, on which you would spend long hours.
· Automatic selection of the most suitable material format
· If several formats of one material are stored in OPTIMIK, the most suitable format is used in calculation automatically, while achieving still greater use of the material.
· Big number of printable configuration sets
· You can print cutting plans, list of the plates, and cut-offs in the listing of orders, cutting plans, lists of the made cut/offs, total list of further utilizable cut-offs, statistics.
· Various printing settings
· In the printing configuration plans you can insert text, set the colour, change the font for the description of the plates and cut-offs etc.
· Records on materials
· All the material, its formats, and receipts and issues will be recorded in one place in a lucid manner.
· An option to enter the dimensions in different units of length
· In the program, the dimensions can be entered in millimetres, centimetres, decimetres, metres, decimal inches, fraction inches, feet and inches as you are used to. The board dimension in the format 5' 11 5/8" x 3' 10 13/16" will not be a ”nightmare” for you any more.
· Calculation in no time
· You will not particularly notice how fast the program will calculate total costs of your jobs and sets and it will recalculate them at the same speed even after the smallest change.
· Images of materials, strips, sets, and other components
· Fore better orientation, an image or a small photo can be assigned to every material, strip, set, or another component. Boring tables and records you have known so far will become alive in the OPTIMIK.
· Recalculation of board dimensions upon changes in external dimensions of the set
· Has your customer got an idea he wants to have the cupboard narrower by 5 cm and higher by 7 cm? No problem, OPTIMIK will recalculate dimensions of all required boards for you!


Limitations:

· the maximum number of optimised parts is 30.