Neutrinox Robot Controller description
Control your RS232 projects through your computer

Neutrinox Robot Controller allows you to control RS232 enabled microchips such as the PIC MCU and the Basic Stamp through your computers serial port.

Neutrinox Robot Controller comes with a lot of options that can be easily configured and custom copy service is offered should you not find the feature/s you need. Just send us an Email of what you'd like to have more and next time you start NRC, it'll automatically upgrade to the custom version assigned with your account! (See 'Custom Copy' below for more info)...

Neutrinox Robot Controller can be used to: control RS232 enabled projects through your computer's serial port with your keyboard and mouse, redirect data flows from virtual serial ports to the real ones or between virtual or real serial ports, view received data from a serial port and save it to file, Send custom strings or a file through the serial port, redirect received data from one port to another with different communication parameters, do stuff when a specified data is received, measure ping time and so stuff on timeout, and much more!

Here are some key features of "Neutrinox Robot Controller":

· Custom baud rates (so you can match your MCU’s offset baud rate)
· Assign data strings up to 20 characters long for each key press/release.
· Two separate beacons send data at specified time intervals
· Assign data to mouse movement, mouse buttons, and the mouse wheel
· Send data when a switch is turned on or off (different data for each value)
· DTR and RTS can be configured to turn on when the port is open
· Assign data to slider movements (different data for every value)
· Do stuff when a specified data is received, such as run a file or program
· Display received data and save them to file
· Cross link with another port (hardware or virtual)
· Redirect received data to another port with different bit rate/parity/data bits/stop bits
· Short cut keys for easy manipulation
· An alternative neat corner form to save desktop space
· NetSettings. Upload your settings file to server and download it from anywhere to save your self time reconfiguring the program on another computer (see ‘NetSettings’ below for more info)
· Each copy of the software is assigned with its own FTP account
· NRC Updater starts with the program to check for updates and seamlessly download and install them in the background (see NRC Update Manager below for more info)
· Custom copy of the software (see ‘Custom Copy’ below for more info)


Requirements:

· Intel Pentium or better processor
· 64 MB RAM
· ~20 MB of disk space
· Internet connection (For updates and NetSettings)


Limitations:

· Several features are disabled
· Nag screen