Sellwood

Sellwood application was designed to help users control and monitor machine or process with virtual HMI on a PC.. Sellwood program connects to the Mitsubishi FX, FX1S,FX1N,FX2N,FX2NC PLC's with the red programming cable. An expensive OPC server is not needed. Build control screens in minutes without programming.

Add push-buttons, gages, dials, sliders, level indicators, selector switches and assign PLC address. Select from 18 analog control devices and 5 bit control devices with pull down menu and paste on the screens. Use as many of each control devices as needed. Add multiple screens to the project, build multiple projects and save them to disk.

Password protect each project. In edit mode all controls devices can be moved and resized on screen. Right click and assign the plc address to the device and change the device properties. Change colors, text, font, size, shape and many more device properties. In run mode the project cannot be edited by the operator.

This easy to use program includes an extensive help information on each control devise. For extending the distance between the PLC and the PC extend the red SC09 programming cable with a 25 pin standard male/female extension cable.

Unplug the round din connector adapter and add the extension cable. The transmission in RS422 and can be extended to 4000 feet (1220 meters) with the right cable. Multiple copies of the program can be run at the same time and connected to different com ports and different FX PLC's. Each project file can be protected with an individual password and distinct com port. The size and location of each project is saved in the project file so each time you open a project it will be in the same position.

The Sellwood HMI Program is available with a driver for the Mitsubishi FX3u PLC that connects to the PC with a USB port. DW Hylton Milwaukie Oregon is not associated with any Mitsubishi company.

Requirements:

￭ serial or USB port ￭ NET Framework

Limitations:

￭ 30 days trial ￭ nag screen