DriversCloud Changelog

What's new in DriversCloud 11.2.7.0

Jan 2, 2023
  • On the DriversCloud application (11.2.7.0) I added a button to be able to select all the drivers to save or restore.
  • At the site level I fixed a bug with the public publication of the configuration which caused the deletion of the old published configurations. The same url is now kept.
  • The new hash system in the configuration url introduced on the new version of the site released this summer no longer allows you to guess the url. The vast majority of our users who shared the url of their configuration simply copied the url from the address bar, which did not work. So I changed the behavior which now shares in public by default for 7 days any configuration detected.
  • I also fixed a bug in the news administration which created a link to the forum before the actual publication of the news.

New in DriversCloud 11.2.6.0 (Sep 6, 2022)

  • Updating the Hardware Information Base
  • CPUZ Engine Update
  • Support for recent WDDM versions in the graphics card module
  • Fixed a crash issue when closing the application when it was opened by a url protocol handler
  • Update of the registry on the zip version of the application to save the url protocol handler of DriversCloud at launch. The zip version did not allow to use the semi automatic installation of drivers.

New in DriversCloud 11.0.2.0 (Jun 3, 2021)

  • Correction on user authentication with the enter key on the keyboard which was inoperative.
  • Addition of a selection frame on the detection level option
  • The online detection option is now the default option if the user does not make any other choice.
  • Correction on translation problems in Spanish and Portuguese.

New in DriversCloud 11.0.1.0 (May 19, 2021)

  • Revised interface and new design:
  • The interface has been completely redesigned. Not all of you use DriversCloud for the same reason. It was possible to customize your experience in the app settings, but few people did. We therefore wanted to go further.
  • We therefore proposed four use cases.
  • Online detection which refers to the old method. It uses all the modules and all the options defined in the parameters.
  • Driver detection: here we only load the necessary modules. The detection time is therefore greatly improved. By choosing this option you will go directly to the pilots page.
  • Help Request is used if you need to share a configuration so that a third party can troubleshoot you. All modules will be activated and you arrive on the configuration page
  • Finally the PC crash analysis. There too all the modules will be activated but you will arrive directly on the BSOD page.
  • Compared to the previous version, it is now possible to minimize the window.
  • And the edit fields for the DriversCloud account now support copy paste.
  • The interface also supports High Dpi and Direct2D support for operating systems that support it.
  • Private life:
  • A big improvement in version 11 is to be able to adjust the level of privacy at the application level.
  • We point out that DriversCloud does not provide any information from its users to third parties and that we respect the RGPD.
  • On the old version all detected data was encrypted and sent to the server. It was possible to set a level of privacy when you shared your configuration. We wanted to go much further. Now this level is managed at the application level. The data you don't want to get won't even get sent to the server.

New in DriversCloud 10.1.1.1 (Feb 4, 2021)

  • Fixed a bug in the update system
  • Update of the material database
  • Conventional hard drives about to give up soul were not detected.

New in DriversCloud 10.0.4.0 (Mar 29, 2017)

  • CPUID engine update: management of the latest processors (Ryzen) and the latest motherboards
  • Updating the hardware database in version 33.

New in DriversCloud 8.0.3.0 (Dec 17, 2015)

  • In some cases the web browser did not open at the end of detection. The code has been simplified and corrected.
  • Fixed a bug on the Optical drives module. Information about media materials were not displayed with recent drives.
  • Taking into account the latest SATA and ATA standards for hard drives module.
  • Improved error handling in case of failure of Web API.

New in DriversCloud 8.0.2.1 (Dec 3, 2015)

  • I've updated the different images that stay with using the old domain name Ma-Config.com. The program logo was also updated.
  • I cleaned the preferences of the installer and the setup application. Some options were no longer relevant.
  • Some people following the migration to Windows 10 encountered a problem with our installer. A bug in Windows 10 now transformed some temporary folder files. I wrote a workaround to clear it.

New in DriversCloud 7.1.6.3 (Jun 4, 2015)

  • Updated security certificates that were due to expire.
  • Better support on edge Microsoft Windows 10 with the integrated application.
  • Since about two months due to a problem introduced in the translation, the detection by the integrated application stopped working for the Spanish language, Portuguese, Russian and Arabic. I was warned of the problem only now. I just correct the problem.
  • For two months our binaries are blocked by Chrome. We did not get any response from them and do not know the reason for jamming. However I put online for Google Chrome installer without the zipped versions of Ma-Config.com agent replacement. They were not bloquées.Le service works normally again for everyone.

New in DriversCloud 7.1.4.0 (Jun 4, 2015)

  • Updated the basic material and cpuid engine.
  • Updated the linux versions.
  • There is more to boost external dependencies on these versions

New in DriversCloud 7.1.3.0 (Jun 4, 2015)

  • This is a minor release that comes verisign update the digital certificate which expired. Following the change of system urls on the site, I also updated the detection url.

New in DriversCloud 7.1.2.0 (Jun 4, 2015)

  • It solves a bug detection on Windows 8.1 32-bit Internet Explorer
  • Graphical monitoring and input modules were not detected with the right language
  • The drivers are now WHQL certified.
  • The Ma-Config.com application has been certified by Microsoft for Windows 8.1. I plan to make it available on the Windows Store later. Texts and translations for sheet is not yet ready. I will update the news when this will happen.

New in DriversCloud 7.1.0.0 (Jun 4, 2015)

  • The main changes are internal to the code. I reorganized my complete development solution. Also I deleted the old residual MFC code in the management of strings throughout the code. The installation system is now more unified across platforms.
  • The agent logs system went fully unicode.
  • The USB module has been completely taken over. It now detects more USB devices than before. This change is also expected to address a problem of disconnection internet when detecting in some people. But I do not know if the problem was actually solved.
  • At the launch of the detection by the integrated application under a user account the web browser did not start. I also fixed this bug.
  • Improved graphics module for laptop with two graphics cards one standby.

New in DriversCloud 7.0.4.0 (Jun 4, 2015)

  • It fixes a bug blank page with links to the TousLesDrivers.com MesDrivers service. If you have a Version 7.0.2.1 and higher already installed and you are using Windows 7 or an older operating system, it is advisable to restart Internet Explorer after you install this new version to fully correct the problem.
  • The zip-free version of the agent installer does not launch if an older version of the agent is already installed. The bug has been fixed.
  • Finally I saw the detection of the firewall antivirus and antispyware in the operating system module. They are now currently detected on Windows 7, Windows 8 and Windows 8.1. it is possible to display on the page summary with the configurator.

New in DriversCloud 7.0.0.4 (Jun 4, 2015)

  • This new version fixes compatibility issues with bad internet connections. I also fixed a problem of compatibility with older browsers.

New in DriversCloud 7.0.0.0 (Jun 4, 2015)

  • The first and greatest interest is the increased reliability with the many security software that can disable ActiveX or change their behavior. The number of users experiencing problems with ActiveX got too many time.
  • It is now possible to update the Ma-Config.com agent without restarting the browser and re-open another page.
  • The Ma-Config.com agent could be reduced at the code level. It is smaller than before.
  • Assuming that there is a bug in Ma-Config.com ca agent will cause only a system service restart. There is no longer any code loaded into the web browser.
  • It is now possible to launch a detection without having to install any program. A Zip version is available by clicking on other facilities in the site service bar. This version can be used directly and does not require any installation.
  • I also changed the mechanism for sending to the server. The XML-RPC protocol was chosen to communicate with the server. Before sending to the server was performed by the web browser. Now it is the responsibility of the Ma-Config.com agent. It is thus possible to provide a progress bar to transfer the configuration to the server.
  • I also took the opportunity to review the installer of Ma-Config.com agent. The selection of silent and language are now offered in a box more user friendly dialogue.
  • Finally, the list of devices in the USB module has been improved.

New in DriversCloud 6.5.1.0 (Mar 11, 2013)

  • Improving the HDD module:
  • Management for detection CSMI raid intel.Elle requires a newer version of drivers RST (Rapid Storage Technology).
  • Managing storage space on Windows 8.
  • Enhanced Network Module: More information is available as the IPv6 address and the speed of transmission and reception of the network connection.
  • The launch of browser making detection by the application is now integrated with restricted rights.