Softpedia >Windows >Multimedia >Graphic >Graphic Editors >SILKYPIX Developer Studio >  Changelog

SILKYPIX Developer Studio Changelog

What's new in SILKYPIX Developer Studio 11.1.14.0

Feb 8, 2024
  • Support Nikon Z f. (*1, 2, 3)
  • Support OMDS TG-7
  • Support Panasonic DC-G100D. (*4)
  • Fixed a problem that could rarely cause red, green, or blue bright spots to appear in the developed results in RAW shots with the following Panasonic models: (*5)
  • DMC-G8, DMC-G80, DMC-G81, DMC-G85, DMC-GX7MK2, DMC-GX80, DMC-GX85, DC-GF9, DC-GF10, DC-GF90, DC-GX800, DC-GX850, DC-GX880
  • Other small fixes
  • 1 HEIF (HIF) format is not supported
  • 2 In operating environments where the CPU does not support SSE4 and AVX2 instructions, RAW images shot with RAW Recording “High efficiency?” and “High efficiency” are not supported
  • 3 NEFX RAW format is not supported
  • 4 “Photo Style/Camera color” is supported and an available photo style can be selected
  • 5 To enable this fix, select [Help] – [Troubleshooting] – [Delete temporary files] from the menu

New in SILKYPIX Developer Studio 11.1.13.0 (Nov 30, 2023)

  • Support Fujifilm GFX100 II. (*1, 2)
  • Fixed a problem that the color space was recorded in sRGB when the film simulation “NOSTALGIC Neg.” or “ETERNA BLEACH BYPASS” was applied to Fujifilm RAWs and the output color space was set to AdobeRGB and developed.
  • Other small fixes.

New in SILKYPIX Developer Studio 11.1.12.1 (Nov 7, 2023)

  • Fixed a problem that some RAWs shot with Panasonic DC-G9M2, DC-GH6, DC-S5M2, and DC-S5M2X were not displayed correctly when opened.

New in SILKYPIX Developer Studio 11.1.12.0 (Oct 27, 2023)

  • Support Panasonic DC-G9M2, DC-GH6, DC-S5M2, and DC-S5M2X. (*1)
  • Support Sony A6700 and A7C II. (*2)
  • Support Sony A7CR. (*2, 3)
  • Fixed a problem that the output color space was sometimes reversed between sRGB and AdobeRGB when developing Panasonic RAWs with the Photo style “L.Monochrome” applied.
  • Other small fixes.

New in SILKYPIX Developer Studio 11.1.11.0 (Sep 19, 2023)

  • Support Canon EOS R100.
  • Support Leica Q3.
  • Fixed a problem that the development parameters of “Multi-light source compensation” were not applied when images were opened using the “Open with another application” function.
  • Other small fixes.

New in SILKYPIX Developer Studio 11.1.10.0 (Jun 29, 2023)

  • Support Fujifilm X-S20. (*1, 2, 3)
  • Support Nikon Z 8. (*2, 4)
  • Support Sony ZV-1 II.
  • Updated the Lensfun lens database file included with this software.
  • Other small fixes.

New in SILKYPIX Developer Studio 11.1.9.0 (May 31, 2023)

  • Support Canon EOS R6 Mark II and R8. (*1, 2)
  • Support Canon EOS R50. (*1)
  • Support Panasonic DC-G95D, DC-G99D, DC-TX2D, DC-TZ95D, DC-TZ96D, DC-ZS80D, DC-TZ200D, DC-TZ202D, DC-TZ220D, DC-ZS200D, and DC-ZS220D. (*3)
  • Support Sony A7R V. (*1, 4)
  • Support Sony FX30 and ZV-E1. (*1)
  • Supports CR3 format RAWs extracted from RAWs shot with RAW burst mode on Canon EOS R10
  • Fixed a problem that could cause color tones to change sharply at certain color temperatures when adjusting color temperature in RAWs shot with the Fujifilm X-H2, X-H2S, and X-T5

New in SILKYPIX Developer Studio 11.1.8.0 (Jan 26, 2023)

  • Support Fujifilm X-T5. (*1, 2)
  • Support Pentax KF. (*3)
  • Supports CR3 format RAWs extracted from RAWs shot with “RAW burst mode” on Canon EOS R7.
  • Other small fixes.

New in SILKYPIX Developer Studio 11.1.7.0 (Dec 12, 2022)

  • Support Canon EOS R10. (*1, *2)
  • Support Fujifilm X-H2 and X-H2S. (*3, *4)
  • Support OMDS OM-5.
  • Supports RAW shots with “Lossless Comp (M)” and “Lossless Comp (S)” on Sony A1 and A7IV.
  • Fixed a problem that the 35mm conversion focal length was not calculated properly in RAWs shot with the APC-C size on the Sony A1.
  • This fix affects the initial values of Sharpening, Noise reduction, Angle, etc. by Dynamic Default in the relevant RAW.
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.20.0 (Oct 13, 2022)

  • Support Leica M10 Monochrom and Q2 Monochrom.
  • Other small fixes.

New in SILKYPIX Developer Studio 11.1.6.0 (Sep 20, 2022)

  • Support Canon EOS R7. (*1, 2)
  • Support Nikon Z 30.
  • Fixed a problem that could cause the white balance color temperature may not be reproduced properly when opening a RAW shot with the white balance set to “Daylight” on the Canon EOS R5. (*3, 4)
  • Fixed a problem that the initial values of Sharpening, Noise reduction, etc. by Dynamic Default were not changed for each ISO sensitivity when RAWs shot with the Canon EOS R3 were opened. (*3)
  • Adjusted brightness when opening DNG format RAWs taken with the Pentax K-3 Mark III. (*3)
  • Fixed a problem that caused Develop and Batch develop to fail when adjusting HDR/Dodge/Color Burn/Highlight/Shadow and White Balance at the same time for Apple ProRAW.
  • Fixed a problem that “NOSTALGIC Neg.” was not present in the list of selectable FILM SIMULATION for RAWs shot with Fujifilm GFX50S II, GFX100, and GFX100S.
  • Fixed a problem that the adjustment result was not correctly reflected in the preview and development result when the White balance “Auto (Natural)” and White balance adjustment were applied to JPEG and TIFF images at the same time.
  • Other small fixes.

New in SILKYPIX Developer Studio 11.1.5.0 (Jul 19, 2022)

  • Support GoPro HERO7 Black, HERO8 Black, HERO9 Black, and HERO10 Black
  • Support Leica M10 Monochrom and Q2 Monochrom
  • Fixed a problem that the imprint data is not applied to the batch development images when the imprint data is created and edited from the [Edit data…] button in the Batch develop selected images, Batch develop marked images, and Batch develop settings dialogs
  • Other small fixes

New in SILKYPIX Developer Studio 11.1.4.2 (Jun 9, 2022)

  • Fixed minor problems.

New in SILKYPIX Developer Studio 11.1.4.1 (May 10, 2022)

  • Fixed following problems in settings for Develop and Batch develop: (*1):
  • Fixed a problem that the Unsharp mask values were not applied and saved correctly
  • Fixed a problem that pixel values set by selecting “Fit to designated size” in Image size to save were not saved
  • Fixed a problem that the Type and Quality value settings were not saved when “Custom” was selected in JPEG settings

New in SILKYPIX Developer Studio 11.1.4.0 (Apr 21, 2022)

  • Support Leica M11
  • Support OMDS OM-1
  • Fixed a problem that black dots sometimes appeared in highlights when the “Clear view” demosaicing engine is applied
  • Fixed a problem that caused thumbnails to not be sorted when OK was clicked without changing the settings in the Sort thumbnails dialog
  • Fixed a problem that occurred when changing any settings and restarting SILKYPIX after adding or editing parameters tastes, the added or edited parameters tastes would disappear
  • Fixed a problem that Photo Style selections for “L.Monochrome S” and “L.ClassicNeo” were not saved in the development parameters for RAW images where Panasonic’s “L.Monochrome S” and “L.ClassicNeo” Photo Style were available in the camera
  • Other small fixes

New in SILKYPIX Developer Studio 11.1.3.2 (Mar 2, 2022)

  • Fixed a problem that the application may be forced to quit due to insufficient memory when loading a large number of RAWs shot with RAW Recording “High efficiency★” and “High efficiency” of Nikon Z 9.
  • Fixed a problem that the image information, etc., was not saved correctly when developing images with the Gradation “Hue” or “Saturation” selected in the Advanced tab of the Fine color controller sub-control.
  • Fixed a problem that the Import from media dialog could not be displayed from the menu, etc., when “Launch the ‘Import from media’ dialog when inserting a removable disk” was set to OFF in the Function settings dialog.
  • Other small fixes.

New in SILKYPIX Developer Studio 11.1.3.0 (Feb 14, 2022)

  • Support Canon EOS R3.
  • Support Nikon Z 9.
  • Fixed a problem that the Color representation drop-down in the Color sub-control did not display any options in RAW images where Panasonic’s “L.Monochrome S” and “L.ClassicNeo” Photo Style were available in the camera.
  • Other small fixes.
  • Fixed a problem that the settings in each dialog were not reflected when the File output settings dialog was opened from the Develop, Batch develop selected images, and Batch develop settings dialogs.
  • Fixed a problem that the edited result was not displayed immediately in the preview when creating or editing Imprint data in the Develop dialog.

New in SILKYPIX Developer Studio 11.1.2.0 (Jan 27, 2022)

  • SILKYPIX Developer Studio Pro11/11 is the latest edition of high-quality RAW development software from the SILKYPIX series, first released in 2004. This product includes the first of its kind improvements to the RAW development engine and incorporates a new demosaicing technology that enables high definition resolution expressions. With this, SILKYPIX has been reborn into higher image quality RAW development software than ever before. The high definition resolution feature, "Super resolution," is made possible with the demosaicing technology, and by compositing layers, brings about a high definition that can’t be brought by a single image. It also supports the iPhone photo format, Apple ProRAW, and makes image adjustments using the object information (semantic masks) possible. Super resolution and Semantic masks are only available for SILKYPIX Developer Studio Pro11.
  • New Features for SILKYPIX Developer Studio Pro11/11:
  • High definition resolution using the latest RAW developing engine:
  • The demosaicing technology for the RAW developing engine has been completely overhauled. With this, it gives a higher definition than the previous SILKYPIX products even in the most minute image details. The latest demosaicing is applied from when SILKYPIX opens the image and gives a high definition resolution experience like never before*. It’s also possible to switch back to the previous demosaicing as well.
  • "Super resolution" and "Multiple exposure (moving object)" composite modes added Professional edition only:
  • By implementing the unprecedented high-quality demosaicing technology, images with even higher resolution levels can be created. Two new features have been added within the composite mode- first the "Super resolution" which enables a high definition resolution that wasn’t able to be reached with a single image, and the "Multiple exposure (moving object)" which is a new multi-exposure composite that reduces the noise or slight misalignment that came from the composite mode.
  • Super resolution:
  • Normally, simply layering multiple images doesn’t produce a high definition image. In SILKYPIX’s "Super resolution," first the pixel count must be selected at a 1.5x or 2xs rate and amplified, then can make precise placement adjustments at the half-pixel level to create a high definition image. This is due to utilizing the feature point detection technology and the image coincidence detection apparatus (Patent No.4689758). With this, even if the single image doesn’t have defined outlines, by having multiple layers, it’s possible to produce a high definition image. There is a limit to the usable pixel count within the image. Please head to our website for details.
  • Multiple exposure (moving object):
  • In a standard multi exposure composite, when taking rapid shots of moving objects the composite results from those layers have some misalignment. By using the new "Multiple exposure (moving object)" feature to composite, it retains the object from the base image and eliminates the other moving elements from the composite results. It also reduces the amount of noise.
  • Supports the Semantic masks within Apple ProRAW Professional edition only:
  • It is now possible to adjust the Semantic masks within the DNG data from images captured by the iPhone’s Apple ProRAW. By analyzing the Semantic mask information from the Apple ProRAW image, it becomes possible to select the spot correction area. This makes it easy to select the spot correction area by simply selecting the item
  • Color conversion with the fine-detailed color gamut:
  • Up until now, the color conversion range had been wide and it was difficult to adjust only the intended color. However, by adding the "Fine color controller (Advanced)" feature, now it is possible to make precise adjustments in color hues and saturations levels for the selected color. It is also possible to change the selected color to something entirely different. It is now possible to make dramatic color changes that go beyond the original color hues, such as turning the blue sky into a sunset hue.
  • Brush feature to intuitively remove unwanted objects Professional edition only:
  • The "Retouch brush tool" makes it possible to remove unwanted objects by tracing said object with this tool. Trace the object that is to be removed and replace it with another specified area within the image. By tracing it with the brush, it’s now possible to remove objects intuitively and smoothly. Additionally, there are two functions with the "Retouch brush tool"; "Copy" to copy the original image as is, as well as "Retouch" to composite the surrounding color around the unwanted object. These can be used separately depending on the needs or objectives.
  • "Clarity" and "Sharpening" functions added to the Partial correction tool (Professional edition only):
  • "Clarity" and "Sharpening" functions have been added to the Partial correction tool. It’s now possible to clarify and sharpen specified areas instead of the entire image. For example, when softening or smoothing human skin or sharpening eyes or eyelashes, now it will only affect the specified area.
  • "White level" adjustment added to add translucency:
  • "White level" has been added as an option within Tone adjustments. Until now the bright parts of the image were adjustable using the Tone curve – with the "White level" the brightness now can be adjusted with a slider. The White level can adjust the maximum brightness value; brightening the dimmed highlights within an image, makes the image appear clearer. Combined with the "Black level" function, this allows for an even more detailed contrast adjustment.
  • "Auto area specification tool" Added to apply AWB to specific light sources (Professional edition only):
  • The Auto White Balance (AWB) normally averages the light sources throughout the entire image and makes adjustments. However, with the Auto area specification tool, it makes it possible to select only parts of an image and apply the AWB in only the selected areas. With this tool, it’s now possible to apply the AWB to only the selected areas even if there are multiple light sources within the image.
  • Import from media and sort (Professional edition only):
  • When a media source is connected to the computer, a settings dialog box will pop up regarding storage locations and file names. This is especially useful when using multiple cameras and wanting to centrally manage all the file names, or if wanting to set a personalized rule for file names. Additionally, the Import from media feature includes both sorting and renaming features, which makes it possible to sort folders based on dates, file information, etc, as well as converting multiple file names at once.
  • Thumbnail filtering feature
  • The feature, while retaining the traditional searches based on the five-star rating system or color marks, added new search functions based on the image information. These include: date, camera used, focal length, aperture value (Av), time value (Tv), ISO speed, and file extensions. If a keyword is assigned to the image, the images can be searched using the keyword as well – this makes it possible to search for the image with an original word.
  • FUJIFILM’s Film Simulation and Panasonic’s Photo Style application
  • The Film Simulation and Photo Style set in FUJIFILM and Panasonic cameras now display as a default. Limited to cameras that support Film Simulation and Photo Style.
  • New features/Improvements list:
  • New demosaicing technology incorporated
  • Detailed adjustments with the specified color gamut
  • White level
  • Thumbnail filtering feature
  • Display the estimated size (JPEG)
  • Improved the Batch rename function
  • FUJIFILM’s Film Simulation and Panasonic’s Photo Style application

New in SILKYPIX Developer Studio 10.1.17.0 (Dec 14, 2021)

  • Support Fujifilm X-T30 II. (*1)
  • Support Sony ZV-E10.
  • Fixed a problem that the adjustment result image may be disturbed when adjusting Highlight/Shadow or Dodge/Color Burn on “Exposure/Luminance” sub-control. (*2)
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.16.0 (Oct 27, 2021)

  • Support Fujifilm GFX50S II. (*1)
  • Support Ricoh GR IIIx.
  • Other small fixes.
  • Support Windows 11.

New in SILKYPIX Developer Studio 10.1.15.0 (Aug 5, 2021)

  • Support Nikon Z fc.
  • Fixed a problem that the FILM SIMULATION settings are not saved in the development parameters file when the FILM SIMULATION “NOSTALGIC Neg.” was applied to RAW shot with Fujifilm GFX100 and GFX100S.
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.14.0 (Jul 1, 2021)

  • Support Leica SL2-S
  • Support Olympus PEN E-P7.
  • Support Panasonic DC-GH5M2.
  • Fixed a problem that lossless compressed APS-C size RAW shot with Sony A1 could not be opened.
  • Fixed a problem that ARQ format RAW created from RAWs shot with “Pixel Shift Multi Shooting” in the Sony A1 could not be opened.
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.13.0 (May 28, 2021)

  • Support Leica M10-R and S3.
  • Support Sony A1. (*1, 2)
  • Support Sony FX3. (*1)
  • Support Pentax K-3 Mark III. (*3)
  • Fixed a problem that “L.Monochrome” was not present in the list of selectable Photo Style for the following Panasonic cameras:
  • DC-TX2, DC-TZ200, DC-TZ202, D-TZ220, DC-ZS200, DC-ZS220
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.12.0 (Apr 16, 2021)

  • Support Fujifilm X-E4 and GFX100S. (*1)
  • Support Sigma fp L.
  • Fixed a problem that the application may be forced to quit when developing RAW shot with some Panasonic cameras.
  • Fixed a problem that the edited result was not applied to the batch development results after editing the imprint data for file output.
  • Fixed a problem that the adjustment parameters of the Crop tool were not applied when loading a development parameters file of SILKYPIX Developer Studio Pro 5 or earlier.
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.11.0 (Feb 4, 2021)

  • Support Canon EOS Kiss M2 / M50 Mark II.
  • Fixed a problem that the image width in the thumbnail could not be reduced in the Display settings dialog when the thumbnail window was arranged on the left or right side of the preview.
  • Fixed some minor bugs related to image display and operation on Select section.
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.10.0 (Dec 17, 2020)

  • Support Nikon Z 6II and Z 7II.
  • Support Sony A7C
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.9.0 (Nov 19, 2020)

  • Support Canon EOS R6.
  • Support Fujifilm X-S10.
  • Support Sony A7S III.
  • Support RAW shot with “High Res Shot” in the Olympus OM-D E-M1 Mark III and E-M5 Mark III.
  • Fixed a problem that the Automatic level correction button would be disabled when adjusting development parameters while the “Tone curve” sub-control was displayed.
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.8.0 (Oct 13, 2020)

  • Support Olympus OM-D E-M10 Mark IV.
  • Support Panasonic DC-S5. (*1)
  • Support Sony ZV-1.
  • Fixed some minor bugs related to image display and operation on Select section.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.21.0 (Sep 5, 2020)

  • Support Canon EOS R5.
  • Support Nikon Z 5.
  • Support Panasonic DC-G100 and DC-G110.
  • Other small fixes.

New in SILKYPIX Developer Studio 10.1.6.0 (Sep 3, 2020)

  • Support Canon EOS R5. (*1, 2)
  • Support Nikon Z 5.
  • Support Panasonic DC-G100 and DC-G110. (*3)
  • Fixed some minor bugs related to image display and operation on Select section.
  • Other small fixes

New in SILKYPIX Developer Studio 9.1.20.0 (Jul 28, 2020)

  • Windows Version / macOS Version:
  • Support Canon EOS Kiss X10i / Rebel T8i / 850D.
  • Fixed a problem that the edges of an image were not displayed correctly in some RAWs when open RAW shot with Nikon COOLPIX A1000. (*1)
  • Other small fixes.
  • Windows Version:
  • Fixed a problem that the settings were not reflected when opening the Develop dialog when “Capitalize extension” was enabled in the File output settings dialog.

New in SILKYPIX Developer Studio 9.1.19.0 (Jun 5, 2020)

  • Support Fujifilm X-T4.
  • Support Leica SL2.
  • Support Nikon D6.
  • Support Panasonic DC-GX880.
  • Support ARQ format that is the format of the RAW created from the RAW shot with “Pixel Shift Multi Shooting” in the Sony A7R IV.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.18.0 (Apr 16, 2020)

  • Support Canon EOS-1D X Mark III.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.17.07 (Mar 6, 2020)

  • Support Fujifilm X100V, and X-T200. (*1)
  • Support Nikon D780, and COOLPIX P950.
  • Support Olympus OM-D E-M1 Mark III. (*2)
  • Fixed a problem that some RAW shot with Nikon Z 7 could not be opened.
  • Fixed a problem that the top of the image were not displayed correctly when open RAW shot with Canon EOS M200.
  • Fixed a problem that may not printing and displaying preview images by a specific development parameters and print settings when printing in Contact sheet.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.16.0 (Dec 17, 2019)

  • Support Canon EOS M200.
  • Support Fujifilm X-Pro3. (*1)
  • Support Nikon Z 50.
  • Support Olympus E-PL10.
  • Support Olympus OM-D E-M5 Mark III. (*2)
  • Support Sigma fp.
  • Fixed a problem that the color reproduction differs greatly between the output color space sRGB and AdobeRGB when select FILM SIMULATION “ETERNA/CINEMA” at RAW shot with Fujifilm cameras.
  • Other small fixes.
  • “FILM SIMULATION” is supported and an available film simulation can be selected.
  • AW images shot with “High Res Shot” are not supported.

New in SILKYPIX Developer Studio 9.1.15.0 (Nov 20, 2019)

  • Support Canon EOS 90D.
  • Support Canon EOS M6 Mark II.
  • Support Fujifilm X-A7.
  • Support Sony A9 II, A6100, and A6600.
  • Fixed a problem that some RAW shot with Canon PowerShot G5 X Mark II could not be opened.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.14.0 (Nov 20, 2019)

  • Support Panasonic DC-S1H.
  • Support Sony A7R IV.
  • Support Sony DSC-RX100M7.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.13.0 (Aug 29, 2019)

  • Support Canon PowerShot G5 X Mark II and PowerShot G7 X Mark III.
  • Support Leica M-E (Typ 240), Q2, and V-LUX 5.
  • Support Olympus TG-6.
  • Fixed a problem that some RAW shot with Fujifilm GFX100 could not be opened.
  • Fixed a problem that the application may be forced to quit when applying the parameter of “Dodge / Color Burn”.
  • Fixed a problem that the parameters of “Spotting tools” are not reflected when opening an image adjusted by “SILKYPIX Developer Studio 8SE”.
  • Fixed a problem that all parameters are not reflected when opening an image adjusted by “RAW FILE CONVERTER EX 3.0 powered by SILKYPIX”.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.12.0 (Jul 9, 2019)

  • Support Fujifilm GFX100. (*1)
  • Support Sony DSC-RX0M2.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.11.0 (May 28, 2019)

  • Support Canon EOS Kiss X10 / Digital Rebel SL3 / 250D / 200D II.
  • Support Panasonic DC-G90, DC-G90D, DC-G91, DC-G91D, DC-G95, and DC-G99. (*1)
  • Support Panasonic DC-TZ95, DC-TZ96, DC-TZ97, and DC-ZS80. (*1)
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.10.0 (Apr 24, 2019)

  • Support Canon EOS RP.
  • Support Panasonic DC-FZ10002, DC-FZ1000M2, DC-S1, and DC-S1R.
  • Support Sony A6400.
  • Fixed a problem that GPS information recorded in a Canon CR3 RAW file is not displayed in the “Image properties”.
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.9.1 (Mar 26, 2019)

  • Fixed the problem that the “Lightness” parameters of “Monochrome controller” may not be applied to the batch developed images.

New in SILKYPIX Developer Studio 9.1.9.0 (Mar 22, 2019)

  • Support Fujifilm X-T30. (*1)
  • Support Ricoh GR III.
  • Improved color reproduction when using a specific FILM SIMULATION with the following cameras: (*2)
  • target cameras: Fujifilm X100F, X-A5, X-E3, X-Pro2, X-T2, X-T20, X-T100, XF10
  • target modes: PROVIA/STANDARD, Velvia/VIVID, ASTIA/SOFT, CLASSIC CHROME, PRO Neg. Hi, PRO Neg. Std
  • Other small fixes.

New in SILKYPIX Developer Studio 8.1.32.0 (Mar 22, 2019)

  • Support Fujifilm X-T30. (*1)
  • Support Ricoh GR III.
  • Improved color reproduction when using a specific FILM SIMULATION with the following cameras: (*2)
  • Target cameras: Fujifilm X100F, X-A5, X-E3, X-Pro2, X-T2, X-T20, X-T100, XF10
  • Target modes: PROVIA/STANDARD, Velvia/VIVID, ASTIA/SOFT, CLASSIC CHROME, PRO Neg. Hi, PRO Neg. Std
  • Other small fixes.

New in SILKYPIX Developer Studio 9.1.8.0 (Feb 22, 2019)

  • Support Nikon COOLPIX A1000.
  • Support Olympus OM-D E-M1X.
  • Other small fixes.

New in SILKYPIX Developer Studio 8.1.30.0 (Feb 21, 2019)

  • Support Leica D-LUX7.
  • Fixed a problem that the RAW shot with Olympus E-M1 which updated to the latest firmware could not be opened.
  • Fixed a problem that some RAWs shot with Canon EOS Kiss M / M50 or EOS R were loaded extremely dark. (*1)
  • Fixed a problem that the effect of “Portrait beautification” greatly differed between preview screen and development result when adjusting “Portrait beautification” and “Add noise” parameters at the same time.
  • Fixed a problem that the parameters of “Monochrome controller” recorded in the developed JPEG or TIFF could not be read using “Load development parameters”.
  • Other small fixes.

New in SILKYPIX Developer Studio 8.1.28.0 (Dec 20, 2018)

  • Support Canon PowerShot SX70 HS.
  • Support Leica M10-D and M10-P.
  • Fixed problem that the rating set for Canon CR3 RAW files are not displayed.
  • Fixed problem that development parameters of unedited categories may also be copied when pasting development parameters.
  • Changed the specification so that it starts from the state that only the checkbox of the edited categories in the “Development parameters applied by taste” checklist are checked when opening the “Add parameters taste” dialog to add a all categories taste.
  • Other small fixes.

New in SILKYPIX Developer Studio 8.1.24.0 (Sep 13, 2018)

  • Support Fujifilm XF10. (*1)
  • Support Sony DSC-RX100M6.
  • Fixed a problem that the hue shifted in the overlapped filter areas of the “Partial correction tool” when the total “Saturation” of the areas became smaller than -100%.
  • Fixed a problem that the slider names may not be switched in the “Sharpening” sub-control when changing the “Type” dropdown list.
  • Changed the initial setting of white balance in Leica DIGILUX 2 from “Fine (5200K)” to “Camera settings”. (*2)
  • Removed the limitations that the upper limit of the edit box on the shadow side is 127 and the lower limit on the highlight side is 129 in the “Level correction” of the “Tone curve” sub-control. (*3)
  • Other small fixes.
  • *1 “FILM SIMULATION” is supported and an available film simulation can be selected.
  • *2 To enable this fix, you must delete temporary files through the menu. To delete temporary files, select [Help] – [Troubleshooting] – [Delete temporary files] from the menu.
  • *3 This change is for channels except L.

New in SILKYPIX Developer Studio 8.1.23.0 (Jul 24, 2018)

  • Support Sony DSC-RX100M5A.

New in SILKYPIX Developer Studio 8.1.22.0 (Jun 26, 2018)

  • Support Fujifilm X-T100. (*1)
  • Fixed a problem that the information of the cropping area setting is not saved correctly when the cropping area is set to the maximum size in some RAW images where the initial state of the cropping area is adjusted according to the aspect ratio set on the camera.
  • Other small fixes.
  • *1 “FILM SIMULATION” is supported and an available film simulation can be selected.

New in SILKYPIX Developer Studio 8.1.21.0 (May 23, 2018)

  • Support Sony A7 III.
  • Other small fixes.

New in SILKYPIX Developer Studio 8.1.20.0 (Apr 25, 2018)

  • Support Canon EOS Kiss X90 / Rebel T7 / 2000D / 1500D.
  • Support Panasonic DC-GH5S. (*1, *2)
  • Support Pentax K-1 Mark II. (*3, *4)
  • “Photo Style/Camera color” is supported and an available photo style can be selected.
  • “V-Log L” of the “Photo Style” is not supported.
  • For RAW images shot with “Pixel Shift Resolution”, several features such as a demosaicing sharpness are unavailable.
  • RAW images shot with “Image Stabilization On” mode of “Pixel Shift Resolution” are not supported. They would be loaded as the RAW images shot with “Pixel Shift Resolution” turned off.

New in SILKYPIX Developer Studio 8.1.18.0 (Mar 22, 2018)

  • Support Fujifilm X-H1. (*1)
  • Support Olympus PEN E-PL9.
  • Support Panasonic DC-GX7MK3, DC-GX9, DC-TX2, DC-TZ200, DC-TZ202, DC-TZ220, DC-ZS200, and DC-ZS220. (*2)
  • Fixed a problem that the status of the color circle of “Fine color controller” sub-control may not be updated when changing a selected image.
  • Other small fixes.
  • *1 “FILM SIMULATION” is supported and an available film simulation can be selected.
  • *2 “Photo style/Camera color” is supported and an available photo style can be selected.

New in SILKYPIX Developer Studio 8.1.17.0 (Feb 22, 2018)

  • Support Fujifilm X-A5 and X-A20. (*1)
  • Support Panasonic DC-GF10 / GF90. (*2)
  • Support ARQ format that is the format of the RAW created from the RAW shot with “Pixel Shift Multi Shooting” in the supported Sony cameras. (*3)
  • Readjusted the image processing of the RAW that shot with Canon PowerShot G1 X Mark III. (*4)
  • Other small fixes.
  • *1 “FILM SIMULATION” is supported and an available film simulation can be selected.
  • *2 “Photo style/Camera color” is supported and an available photo style can be selected.
  • *3 The some functions are limited, such as “Demosaicing sharpness” is not available.
  • *4 To enable this fix, you must delete temporary files through the menu. To delete temporary files, select [Help] – [Troubleshooting] – [Delete temporary files] from the menu.

New in SILKYPIX Developer Studio 8.1.16.0 (Jan 30, 2018)

  • Support Panasonic DC-G9. (*1)
  • Support Sony A7R III. (*2)
  • Fixed a problem that the application might be forced to quit when reading TIFF images with information of a specific format.
  • Other small fixes.

New in SILKYPIX Developer Studio 8.1.15.0 (Dec 21, 2017)

  • Support Leica CL.
  • Support Sony DSC-RX0 and DSC-RX10M4.

New in SILKYPIX Developer Studio 8.1.14.0 (Dec 7, 2017)

  • Support Canon PowerShot G1 X Mark III.
  • Support Leica M Monochrom (Typ 246).
  • Fixed a problem that information of “Image properties” could not be saved in the images developed from RAW images shot with Kodak DCS Pro SLR/n, SLR/C, 14/n, 14/nx, or Samsung WB5000.
  • Fixed a problem that the RGB 16 bit TIFF images developed from RAW images shot with Kodak DCS Pro SLR/n, SLR/C, 14/n, 14/nx, or Samsung WB5000 could not be displayed correctly.
  • Fixed a problem that the size of “Main window” may be inappropriate when you switch from “Preview mode” to “Thumbnail mode”.
  • Other small fixes.
  • Windows Version
  • Changed the specification so that the task bar is not hidden when the full screen preview is displayed on the main monitor.

New in SILKYPIX Developer Studio 8.1.13.0 (Oct 23, 2017)

  • Support Canon EOS M100.
  • Support Fujifilm X-E3. (*1)
  • Support Leica S (Typ 007).
  • Fixed a problem that RAW images taken at the specific ISO with Canon EOS 9000D / 77D, EOS Kiss X9 / Rebel SL2 / 200D, or EOS Kiss X9i / Rebel T7i / 800D have a strong magenta color cast. (*2)
  • Other small fixes.

New in SILKYPIX Developer Studio 8.1.12.0 (Sep 15, 2017)

  • Support Casio EX-ZR5100.
  • Support Nikon D850.
  • Support Olympus E-M10 Mark III.
  • Other small fixes.

New in SILKYPIX Developer Studio 8.1.11.0 (Aug 31, 2017)

  • Support Canon EOS Kiss X9 / Rebel SL2 / 200D.
  • Support Casio EX-ZR4100.
  • Support Leica TL2.
  • It is now possible to import “tastes” by dropping saved “tastes” files onto the preview window or thumbnail window.
  • Fixed a problem that color reproduction was inaccurate for sRAW and mRAW images taken with Canon EOS 80D and a certain light source (such as incandescent light bulbs). (*1, *2)
  • Fixed a problem that “Output color space” at “Development settings” sub-control does not change correctly to AdobeRGB when opening JPEG/TIFF images that embedded AdobeRGB ICC Profile.
  • Fixed the default pixel size of RAW taken with Nikon D3X. (*1, *3)
  • Other small fixes.
  • Notes:
  • *1 To enable this fix, you must delete temporary files through the menu. To delete temporary files, select [Help] – [Troubleshooting] – [Delete temporary files] from the menu.
  • *2 By enabling this fix, the colors of sRAW and mRAW will be changed that compared with the previous versions. However, when you adjusted sRAW and mRAW images with previous versions, the colors of the images will not be changed. To enable this fix, you should select [Parameters] – [Initialize development parameters] from the menu.
  • *3 The pixel size was changed from 6064 x 4028 to 6048 x 4032 in FX format, from 4016 x 2636 to 3968 x 2640 in DX format, and from 5104 x 4028 to 5056 x 4032 in an aspect ratio of 5:4.

New in SILKYPIX Developer Studio 8.1.10.0 (Aug 4, 2017)

  • Support Canon EOS 6D Mark II. (*1)
  • *1 In case of sRAW and mRAW, the part feature is limited. Demosaicing sharpness is not available.

New in SILKYPIX Developer Studio 8.1.9.0 (Jul 20, 2017)

  • Support Casio EX-ZR3200 and EX-ZR3700
  • Support Olympus STYLUS TG-5
  • Support Sony A9
  • Other small fixes

New in SILKYPIX Developer Studio 8.1.8.0 (Jul 20, 2017)

  • Support Nikon D7500.
  • Support Panasonic DC-FZ81, DC-FZ83, DC-TZ90, DC-TZ91, DC-TZ92, DC-TZ93, and DC-ZS70. (*1)
  • Fixed a problem that the preview had not been displayed correctly when you used “Dodge / Color Burn / HDR” or “Multi-light source compensation” at “White balance” sub-control for the X3F format file shot with Sigma dp0 Quattro, dp1 Quattro, dp2 Quattro, or dp3 Quattro.
  • Other small fixes.

New in SILKYPIX Developer Studio 7.1.17.0 (Jul 20, 2017)

  • Support Casio EX-ZR3200 and EX-ZR3700.
  • Support Olympus STYLUS TG-5.
  • Support Sony A9.
  • Other small fixes.

New in SILKYPIX Developer Studio 7.1.16.0 (Jun 20, 2017)

  • Support Nikon D7500.
  • Support Panasonic DC-FZ81, DC-FZ83, DC-TZ90, DC-TZ91, DC-TZ92, DC-TZ93, and DC-ZS70. (*1)
  • Other small fixes.

New in SILKYPIX Developer Studio 7.1.15.0 (May 18, 2017)

  • Support Canon EOS 9000D / 77D and EOS Kiss X9i / Rebel T7i / 800D.
  • Support Nikon Coolpix B700.
  • Fixed a problem that the application might be forced to quit when you opened the dialog such as "Open file", "Develop", etc. after you installed the Windows 10 Creators Update (version 1703).

New in SILKYPIX Developer Studio 7.1.14.0 (Apr 27, 2017)

  • Support Apple iPhone 7 and iPhone 7 Plus.
  • Support Canon EOS M6 and PowerShot G9 X Mark II.
  • Support Leica M10.
  • Improved development result when color temperature of "White balance" of RAW image taken with "Sony A99 II" is set to 5263K to 5667K. (*1)
  • Fixed a problem that tastes of IPTC on "Image Properties" sub-control were available when "Develop JPEG/TIFF images" function was OFF or JPEG/TIFF images which set "Protect" of "Development settings" sub-control were selected.
  • Fixed a problem that "Imprint data settings" dialog was not displayed correctly when the size of the dialog was changed.
  • Fixed a problem that SILKYPIX might not be launched when you installed SILKYPIX as a standard user account.
  • Fixed a problem that some characters in "Develop" dialog turned into garbled characters.
  • Other small fixes.

New in SILKYPIX Developer Studio 7.1.13.0 (Mar 23, 2017)

  • Support Panasonic DC-FZ80, DC-FZ82, DC-FZ85, and DC-GH5. (*1)
  • Fixed a problem that image layers of the imprint data might not be applied to the print or developed JPEG/TIFF images.
  • End of support for Windows Vista.
  • Other small fixes.
  • "Photo Style/Camera color" is supported and an available photo style can be selected.

New in SILKYPIX Developer Studio 7.1.12.0 (Feb 28, 2017)

  • Support Fujifilm GFX 50S.
  • "FILM SIMULATION" is supported and an available film simulation can be selected.

New in SILKYPIX Developer Studio 7.1.11.0 (Feb 23, 2017)

  • Support Sony A6500.
  • Support Fujifilm X100F, X-A10, and X-T20. (*1)
  • Support Leica TL.
  • Support Panasonic DC-GF9, DC-GX800, and DC-GX850. (*2)
  • Support Pentax KP. (*3)
  • Fixed a problem that a part of IPTC information was recorded into a developed image when you checked "Discard SILKYPIX parameters and image information" in the "File output settings" dialog.
  • Fixed a problem that the "White balance" sub-control was disabled when you selected an image that "Auto exposure bias" was applied to.
  • Fixed a problem that the image whose width or height was over 10000 pixels could not be developed with the original size.
  • Fixed a problem that "Auto correct" button in the "Lens aberration controller" sub-control was not shown correctly when you select a DNG image shot with Pentax K-S2.
  • Fixed a problem that "Fixed size (fixed aspect ratio)" of "Cropping method" on the "Crop tool" did not operate correctly when no printer device settings exist.
  • Other small fixes:
  • "FILM SIMULATION" is supported and an available film simulation can be selected.
  • "Photo Style/Camera color" is supported and an available photo style can be selected.
  • For RAW images shot with "Pixel Shift Resolution", several features such as a demosaicing sharpness are unavailable.

New in SILKYPIX Developer Studio 7.1.9.0 (Nov 24, 2016)

  • Support Casio EX-ZR5500.
  • Support Fujifilm X-A3. (*1)
  • Support Olympus PEN E-PL8.
  • Support Panasonic DMC-G8, DMC-G80, DMC-G81, DMC-G85, DMC-LX9, DMC-LX10, DMC-LX15, DMC-FZH1, DMC-FZ2000, DMC-FZ2500. (*2)
  • Fixed a problem that the application was force to quit when you switched "Display modes" immediately after launching the application.
  • Fixed a problem that the application was force to quit when "Sort thumbnails" was being executed.
  • Fixed a problem that you could not operate "Cropping area" correctly when you restarted the application with the setting "Cropping method" as 1:1 fixed ratio in "Crop tool".
  • Fixed a problem that the effects of "Spotting tools" might not be applied to the output images when you developed images with "Batch Develop" functions.
  • Fixed a problem that the effects of "Spotting tools" were applied to incorrect positions at the Nikon RAW images with the size of "RAW S" and "RAW M".
  • ​Improved the image quality of the output images with the output color space as "AdobeRGB" at "Development settings"​.​
  • Other small fixes:
  • "FILM SIMULATION" is supported and an available film simulation can be selected.
  • "Photo Style/Camera color" is supported and an available photo style can be selected.

New in SILKYPIX Developer Studio 7.1.8.0 (Sep 15, 2016)

  • Support Canon 5D Mark IV. (*1)
  • Support Casio EX-ZR4000 and EX-ZR5000.
  • Support Fujifilm X-T2. (*2)
  • Support Nikon D3400.
  • Fixed a problem that "Display warning" functions did not operate correctly when "Flash warning" was not checked.
  • Fixed a problem that parameters of "Add noise" were not applied when parameters of "Dodge / Color Burn / HDR" were applied.
  • In case of sRAW and mRAW, the part feature is limited. Demosaicing sharpness is not available.
  • "FILM SIMULATION" is supported and an available film simulation can be selected.

New in SILKYPIX Developer Studio 7.1.7.0 (Aug 25, 2016)

  • Support Pentax K-70. (*1)
  • Support Kodak PIXPRO AZ651, and S-1.
  • Added a function to adjust the initial cropping area to display a RAW image in the same aspect ratio in shooting. (*2)
  • Fixed a problem that the development parameters of some images might be initialized after "Batch rename" was executed.
  • Other small fixes.
  • For RAW images shot with "Pixel Shift Resolution", several features such as a demosaicing sharpness are unavailable.
  • This function is only available for RAW images shot with certain cameras. And it is needed readjustment about the cropping area if a RAW image with the aspect ratio setting in shooting with Panasonic DMC-FZ300, DMC-FZ330, DMC-GF8, DMC-GX7MK2, DMC-GX8, DMC-GX80, DMC-GX85, DMC-TX1, DMC-TZ80, DMC-TZ81, DMC-TZ85, DMC-TZ100, DMC-TZ101, DMC-TZ110, DMC-ZS60, DMC-ZS100, and DMC-ZS110 is loaded.

New in SILKYPIX Developer Studio 7.1.6.0 (Jun 24, 2016)

  • Support Panasonic DMC-GX7MK2, DMC-GX80, and DMC-GX85. (*1)
  • Support Sony DSC-RX10M3.
  • Support "LOSSLESS COMPRESSED" RAW images with Fujifilm X-Pro2.
  • Fixed a problem that the preview image may have not been rendered correctly when a parameter was changed with a slider.
  • Fixed a problem that the application was force to quit when a RAW image having a specific combination of the image size and the focal length was opened.
  • Other small fixes.

New in SILKYPIX Developer Studio 6.1.28.0 (May 19, 2016)

  • Support Canon EOS-1D X Mark II (*1), EOS Kiss X80 / Rebel T6 / 1300D, and PowerShot G7 X Mark II.

New in SILKYPIX Developer Studio 6.1.23.3 (Sep 25, 2015)

  • Fixed a problem that RAW images with Canon EOS Rebel T6i / EOS 750D are not available.
  • Fixed a problem that RAW images with Canon EOS Rebel T6s / EOS 760D are not available.
  • Fixed a problem that RAW images with Canon EOS Rebel T5 / EOS 1200D are not available.

New in SILKYPIX Developer Studio 6.1.23.2 (Sep 9, 2015)

  • Fixed a problem that "Profile" was imported improperly except "Natural" when "Standard color" was selected in "Color representation" on "Color" sub-control.

New in SILKYPIX Developer Studio 6.1.23.0 (Sep 9, 2015)

  • Support Canon EOS Kiss X8i / Rebel T6i / 750D and EOS 8000D / Rebel T6s / 760D.
  • Support Leica Q (Typ 116).
  • Support Panasonic DMC-GX8.
  • Support Sony DSC-RX10M2 and DSC-RX100M4.
  • Support Windows 10. (*1)
  • Support a new color profile "Photo Style / Camera Color" which reproduce color creation of ​a part of ​Panasonic digital cameras. ​(*2)
  • Fixed a problem that could not rename properly when "Date", "Time", and "Date&time" are set in [Part2] by batch rename.
  • Other small fixes.

New in SILKYPIX Developer Studio 6.1.22.0 (Jul 23, 2015)

  • Support Canon PowerShot G3 X
  • Support Casio EX-100F and EX-ZR3000
  • Support Ricoh GR II
  • Support RAW images shot with "Pixel Shift Resolution" (Pentax K-3 II). For RAW images shot with "Pixel Shift Resolution", several features such as a demosaicing sharpness are unavailable
  • Other small fixes

New in SILKYPIX Developer Studio 6.1.21.0 (Jul 23, 2015)

  • Support Canon EOS 5Ds and 5Ds R.
  • Support Fujifilm X-T10.
  • Support Leica S (Typ 006), D-LUX (Typ 109) and V-LUX (Typ 114).
  • Support Microsoft / Nokia Lumia 930, Lumia 1020 and Lumia 1520.
  • Support Nikon D810A.
  • Support Panasonic DMC-G7 and DMC-G70.
  • Fixed a problem that highlight region of RAW image with the size of "RAW S" was colored (Nikon D4S and D810).

New in SILKYPIX Developer Studio 6.1.20.0 (Jul 23, 2015)

  • Support Canon EOS M3.
  • Support Casio EX-ZR3500.
  • Support Olympus STYLUS TG-4.
  • Support Pentax K-3 II. RAW images shot with "Pixel Shift Resolution" are not supported.
  • Improved a color reproduction of highlight for Canon EOS M. To enable this fix, you select [Parameters] - [Initialize development parameters] from the menu. By applying this fix, developed image is changed even if the same development parameters are applied.
  • Modified default parameters for "High Res Shot" images with Olympus E-M5 Mark II.
  • Fixed a problem that batch develop for "High Res Shot" images with Olympus E-M5 Mark II was failed.
  • Fixed a problem that lens name recorded in a JPEG image does not shown in "Image properties" sub-control for some cameras by Fujifilm.
  • Fixed a problem that preview image for JPEG/TIFF image with an embedded ICC profile does not rendered correctly.
  • Other small fixes.

New in SILKYPIX Developer Studio 6.1.19.0 (Jul 23, 2015)

  • Support Hasselblad CFV-50c - support only RAW images with 3FR file format. (RAW images with FFF file format are not supported.)
  • Support Nikon Nikon 1 J5, Coolpix P340.
  • Support Olympus AIR A01, STYLUS SH-2.
  • Support Samsung NX500.
  • Support "High Res Shot" RAW images with Olympus E-M5 Mark II (Firmware Ver1.1).
  • Fixed a problem that shortcut keys for "Increase color temperature" and "Decrease color temperature" were not worked correctly for images with auto white balance in SILKYPIX.
  • Fixed a problem that 16 bit TIFF images were not saved when "Convert to designated color space" was selected in "Output color space" of "File output settings".
  • Other small fixes.

New in SILKYPIX Developer Studio 6.1.18.0 (Jul 23, 2015)

  • Support Nikon D7200.
  • Support Olympus E-M5 Mark II.
  • Support Pentax K-S2.
  • Other small fixes.

New in SILKYPIX Developer Studio 6.1.17.0 (Feb 28, 2015)

  • Support Nikon D5500.
  • Support Fujifilm X-A2 and XQ2.
  • Support Panasonic DMC-GF7, DMC-TZ70, DMC-TZ71 and DMC-ZS50.
  • Fixed a problem that a selection mark did not appear in the "All category tastes" dropdown list.
  • Fixed a problem that SILKYPIX failed to develop DNG images taken with "HDR Capture" and Ricoh's camera.
  • Other small fixes.

New in SILKYPIX Developer Studio 6.1.16.0 (Jan 22, 2015)

  • Support Casio EX-100PRO.
  • Support Leica X (Typ 113).
  • Fixed a problem that edit boxes on "Tone curve" sub-control were not updated by changing a channel.
  • Fixed a problem that loupe tool was not able to use together with crop tool or shading center tool.
  • Other small fixes.

New in SILKYPIX Developer Studio 6.1.15.1 (Jan 8, 2015)

  • Fixed a problem that image properties edited with previous versions were not read correctly.

New in SILKYPIX Developer Studio 6.1.15.0 (Jan 8, 2015)

  • Support Sony A7II.
  • Support Leica X-E (Typ 102).
  • Support Samsung NX1.
  • Fixed a problem that images taken with Canon PowerShot G7 X and a telephoto side had invalid pixels on the image edges.
  • Fixed a problem that color reproduction was inaccurate for sRAW and mRAW images taken with Canon EOS 1D X, EOS 1D C, EOS 5D Mark III, EOS 6D, EOS 7D Mark II, and EOS 70D and a certain light source (such as incandescent light bulb).
  • Changed some explanations of functions in "Shortcut keys settings" dialog.
  • Improved a performance of thumbnail rendering on some PCs.
  • Other small fixes.

New in SILKYPIX Developer Studio 4.0.104.0 (Sep 25, 2014)

  • New support: Nikon D750
  • New support: Pentax K-S1
  • New support: FUJIFILM X30
  • New support: Olympus E-PL7
  • New support: Sony A5100

New in SILKYPIX Developer Studio 4.0.103.0 (Sep 25, 2014)

  • New support: Casio EX-ZR1300, EX-ZR1500
  • New support: Hasselblad HV
  • New support: Leica T(Typ 701)
  • New support: Pentax Q-S1
  • New support: Sony A7S, A5000

New in SILKYPIX Developer Studio 4.0.102.1 (Sep 25, 2014)

  • Support RAW images with the size of "RAW S" (Nikon D4S and D810).

New in SILKYPIX Developer Studio 4.0.102.0 (Sep 25, 2014)

  • New support: Nikon D810 (The size of "RAW S" is not supported currently.)
  • New support: Panasonic DMC-FZ1000
  • New support: Sony A77II, DSC-RX100M3
  • New support: Hasselblad Lunar

New in SILKYPIX Developer Studio 4.0.101.0 (Sep 25, 2014)

  • New support: Nikon Nikon 1 S2
  • New support: Pentax 645Z
  • New support: Leica M Monochrom
  • New support: Casio EX-ZR850
  • New support: Hasselblad Stellar

New in SILKYPIX Developer Studio 4.0.100.0 (Sep 25, 2014)

  • New support: Nikon Nikon 1 J4
  • New support: Sony A58, A3500, A6000

New in SILKYPIX Developer Studio 4.0.99.0 (Sep 25, 2014)

  • New support: Nikon Nikon 1 V3
  • New support: Panasonic DMC-GH4
  • New support: Sony NEX-5T
  • End of support for Windows XP.
  • Fixed a problem that RAW images with Nikon D7000 in Multiple Exposure Mode have a strong magenta color cast.

New in SILKYPIX Developer Studio 4.0.98.0 (Mar 27, 2014)

  • New support: Canon EOS Kiss X70 / Rebel T5 / 1200D
  • New support: Olympus E-M10
  • New support: Casio EX-100
  • Fixed a problem that blown-out highlights are brought to photos taken with Nikon Coolpix P7700 which shutter speed is set to slower than 1 second.
  • Improved the image quality of Nikon Coolpix P7700, P7800.

New in SILKYPIX Developer Studio 4.0.97.0 (Mar 27, 2014)

  • New support: Nikon D4S (The size of "RAW S" is not supported currently.)

New in SILKYPIX Developer Studio 4.0.96.0 (Mar 27, 2014)

  • New support: Nikon D3300, Nikon 1 AW1
  • New support: Panasonic DMC-TZ60
  • New support: Fujifilm FinePix S1, X-T1

New in SILKYPIX Developer Studio 4.0.95.0 (Jan 24, 2014)

  • New support: Canon EOS M2

New in SILKYPIX Developer Studio 4.0.94.1 (Dec 17, 2013)

  • Supported the APS-C size of Sony A7 and A7R.

New in SILKYPIX Developer Studio 4.0.94.0 (Dec 10, 2013)

  • Support for the following cameras has been added :Olympus : STYLUS1 / SONY : DSC-RX10, a7, a7R, a3000
  • Improved the processing of the HR mode in EXR sensor models of Fujifilm.
  • Improved the auto white balance of the Sony A550.

New in SILKYPIX Developer Studio 4.0.93.0 (Nov 28, 2013)

  • Support for the following cameras has been added : Casio : EX-10 / Fujifilm : X-A1, XQ1 / Leica : C(Type112) / Nikon : Df, D5300 / Panasonic : DMC-GM
  • Improved the processing of the HR mode in EXR sensor models of Fujifilm.
  • Improved the image quality of the Sony A550.

New in SILKYPIX Developer Studio 4.0.92.0 (Nov 11, 2013)

  • Support for the following cameras has been added : FujiFilm : X-E2

New in SILKYPIX Developer Studio 4.0.91.0 (Nov 5, 2013)

  • Support for the following cameras has been added : Pentax : K-3 / Mac OS X Mavericks (v10.9)

New in SILKYPIX Developer Studio 4.0.90.0 (Oct 24, 2013)

  • Support for the following cameras has been added : Nikon : D610, CoolPix P7800

New in SILKYPIX Developer Studio 4.0.89.0 (Oct 15, 2013)

  • Support for the following cameras has been added : CASIO : EX-ZR1100 / Olympus : OM-D E-M1

New in SILKYPIX Developer Studio 4.0.88.0 (Sep 12, 2013)

  • Support for the following cameras has been added : Panasonic : DMC-GX7

New in SILKYPIX Developer Studio 4.0.87.0 (Aug 29, 2013)

  • Support for the following cameras has been added : Canon : EOS 70D / Casio : EX-ZR700 / Leica : M

New in SILKYPIX Developer Studio 4.0.86.0 (Aug 23, 2013)

  • Support for the following cameras has been added:
  • Panasonic : DMC-FZ70, DMC-FZ72

New in SILKYPIX Developer Studio 4.0.85.0 (Jul 29, 2013)

  • Support for the following cameras has been added : Fujifilm : X-M1, HS35EXR / Leica : X Vario / Panasonic : DMC-FZ70 / Sony : DSC-RX1R, DSC-RX100 II,

New in SILKYPIX Developer Studio 4.0.83.0 (Jul 1, 2013)

  • Support for the following cameras has been added : Olympus : E-P5, E-PL6

New in SILKYPIX Developer Studio 4.0.82.1 (Jun 21, 2013)

  • Support for the following cameras has been added : Panasonic : DMC-G6, DMC-LF1 / Sony : NEX-VG900, NEX-VG30E

New in SILKYPIX Developer Studio 4.0.81.0 (May 27, 2013)

  • Support for the following cameras has been added : Ricoh : GR

New in SILKYPIX Developer Studio 4.0.80.0 (May 1, 2013)

  • Support for the following cameras has been added : Canon : EOS Kiss X7 & Rebel SL1 & 100D

New in SILKYPIX Developer Studio 4.0.79.1 (Apr 26, 2013)

  • Support for the following cameras has been added : Canon : EOS Kiss X7i & Rebel T5i & 700D / Panasonic : DMC-GF6

New in SILKYPIX Developer Studio 4.0.79.0 (Apr 24, 2013)

  • Support for the following cameras has been added : Canon : EOS Kiss X7i & Rebel T5i & 700D / Panasonic : DMC-GF6

New in SILKYPIX Developer Studio 4.0.78.0 (Mar 25, 2013)

  • Support for the following cameras has been added : Canon : EOS-1D C / Nikon : Coolpix A / Sony : NEX-3N

New in SILKYPIX Developer Studio 4.0.77.0 (Mar 14, 2013)

  • Support for the following cameras has been added : Nikon : D7100 / Pentax : MX-1

New in SILKYPIX Developer Studio 4.0.76.0 (Mar 12, 2013)

  • Support for the following cameras has been added : Casio : EX-ZR700 / FujiFilm: FinePix F900EXR / Olympus : STYLUS XZ-10

New in SILKYPIX Developer Studio 4.0.74.0 (Feb 7, 2013)

  • Support for the following cameras has been added : Nikon 1 J3 / Nikon 1 S1

New in SILKYPIX Developer Studio 3.0.32.2 (Oct 23, 2009)

  • This version uses the improved development engine compared to the previous version (1.0/2.0).
  • It hands the development parameter of the previous version and it provides the development result which is as near as possible but a small difference is expressed.