What's new in SyncBackPro 11.3.20.0 Beta
Apr 15, 2024
- Updated (Pro/SE): Can use wildcards for network names in Copy Delete -> Network settings
- Fixed (Pro): Can add secrets connection if no secrets
New in SyncBackPro 11.3.17.0 Beta (Apr 5, 2024)
- Updated (Pro/SE): Can use wildcards for network names in Copy Delete -> Network settings
New in SyncBackPro 11.3.15.0 Beta (Mar 28, 2024)
- Updated (Pro): Considerably quicker initial start when using SBMS
- Updated (Pro/SE): User interface changes to choosing profiles backup directory in Global Settings
- Updated: French and Dutch translations
- Updated (Pro): Change in Google Drive and Google Photos to ensure users grant all required permissions during authorization
- Updated: When enabling or disabling a schedule you are prompted if the schedule should also be enabled or disabled
- Updated (Pro): S3 (and compatibles) retry HTTP request if socket error 10048
- Fixed: In the main window, a tab may incorrectly appear (called scGP...) when there are errors
- Fixed: For WebDAV, do not retry upload if HTTP Error 507 (Insufficient Storage)
- Fixed: Correct a problem in extracting user's name from the encoded token (SharePoint)
- Fixed: In rare cases the minimized to tray balloon notification flickers constantly
- Fixed: Occasional error opening Global Settings
- Fixed: Error on start-up due to invalid entry in registry for Windows TLS
New in SyncBackPro 11.3.14.0 Beta (Mar 27, 2024)
- Fixed (Pro/SE): When using Bing Speech the sound will no longer be clipped when SyncBack or the profile ends
New in SyncBackPro 11.3.13.0 Beta (Mar 25, 2024)
- Updated: When enabling or disabling a schedule you are prompted if the schedule should also be enabled or disabled
- Updated (Pro): S3 (and compatibles) retry HTTP request if socket error 10048
New in SyncBackPro 11.3.12.0 Beta (Mar 23, 2024)
- Updated (Pro): Considerably quicker initial start when using SBMS
- Updated (Pro/SE): User interface changes to choosing profiles backup directory in Global Settings
- Updated: French and Dutch translations
- Updated (Pro): Change in Google Drive and Google Photos to ensure users grant all required permissions during authorization
- Fixed: In the main window, a tab may incorrectly appear (called scGP...) when there are errors
- Fixed: For WebDAV, do not retry upload if HTTP Error 507 (Insufficient Storage)
- Fixed: Correct a problem in extracting user's name from the encoded token (SharePoint)
- Fixed: In rare cases the minimized to tray balloon notification flickers constantly
- Fixed: Occasional error opening Global Settings
- Fixed: Error on start-up due to invalid entry in registry for Windows TLS
New in SyncBackPro 11.3.11.0 Beta (Mar 22, 2024)
- Fixed: In rare cases the minimized to tray balloon notification flickers constantly
New in SyncBackPro 11.3.9.0 Beta (Mar 12, 2024)
- Updated: French and Dutch translations
- Fixed: In the main window, a tab may incorrectly appear (called scGP...) when there are errors
- Fixed: For WebDAV, do not retry upload if HTTP Error 507 (Insufficient Storage)
- Fixed: Correct a problem in extracting user's name from the encoded token (SharePoint)
New in SyncBackPro 11.3.8.0 Beta (Feb 26, 2024)
- Updated (Pro): Considerably quicker initial start when using SBMS
- Updated (Pro/SE): User interface changes to choosing profiles backup directory in Global Settings
New in SyncBackPro 11.3.7.0 (Feb 20, 2024)
- New (Pro/SE): Can import profiles from profile backup (via Export / Import main menu)
- Updated: Recompiled using latest Delphi compiler
- Updated: Next Run column will append "(Periodically)" if profile set to run scheduled and periodically and next run is via periodical
- Updated: Windows 11 dark mode improved (window border is dark)
- Updated: Added and documented shortcut keys when modifying profiles in a group
- Updated: When profile is running the Running column in main window states if integrity check, simulation or restore
- Updated: If a remote desktop connection is being used then the style is forced to Windows
- Updated: Installer is more likely to get the correct serial number when upgrading and more than one serial is in the system
- Updated: Log history on main page of log file will show 7 days maximum instead of 5
- Updated (Pro): Icon in main window shows when profile is running an integrity check
- Updated (Pro): Retry when an error occurs during metadata retrieval (AWS S3 and compatibles)
- Updated (Pro/SE): Warnings on When pages when using a Group Queue. Help file also updated.
- Updated (Pro/SE): When testing file copying methods can also use compressed traffic option
- Updated (Pro): Support for Azure Cold blob tier
- Updated (Pro/SE): Windows System Restore Points not supported on Windows Server
- Updated (Pro): Can use your own Google Drive Client ID and Secret. Preparation for not being able to use 2BrightSparks client ID.
- Updated (Pro): Can use your own Egnyte Key and Secret. Preparation for not being able to use 2BrightSparks key.
- Updated: Quicker opening profile modification window
- Updated: Can use NT Namespaces (\?GLOBALROOTDevice...) for source and destination
- Fixed (Pro): Uploading large files (2GB plus) to ShareFile can sometimes freeze at the end of the upload
- Fixed (Pro): Shared settings could not be used with HTTP Download
- Fixed: Pop-up menu for group (when modifying) was available even if not a group queue
- Fixed: If just parameters for profiles in a group queue were changed then main display was not updated
- Fixed (Free): Checkbox to create a group queue was incorrectly enabled in New Profile wizard
- Fixed: When restoring SyncBack window from minimized to maximized (and tray icon not used) may get black space at top of window
- Fixed (SE/Pro): Group Queues run periodically will run many times
- Fixed: In profile configuration may not connect to network share
New in SyncBackPro 11.3.4.0 Beta (Feb 11, 2024)
- New (Pro/SE): Can import profiles from profile backup (via Export / Import main menu)
- Updated: Recompiled using latest Delphi compiler
- Updated: Next Run column will append "(Periodically)" if profile set to run scheduled and periodically and next run is via periodical
- Updated: Windows 11 dark mode improved (window border is dark)
- Updated: Added and documented shortcut keys when modifying profiles in a group
- Updated: When profile is running the Running column in main window states if integrity check, simulation or restore
- Updated: If a remote desktop connection is being used then the style is forced to Windows
- Updated: Installer is more likely to get the correct serial number when upgrading and more than one serial is in the system
- Updated: Log history on main page of log file will show 7 days maximum instead of 5
- Updated (Pro): Icon in main window shows when profile is running an integrity check
- Updated (Pro): Retry when an error occurs during metadata retrieval (AWS S3 and compatibles)
- Updated (Pro/SE): Warnings on When pages when using a Group Queue. Help file also updated.
- Updated (Pro/SE): When testing file copying methods can also use compressed traffic option
- Updated (Pro): Support for Azure Cold blob tier
- Updated (Pro/SE): Windows System Restore Points not supported on Windows Server
- Updated (Pro): Can use your own Google Drive Client ID and Secret. Preparation for not being able to use 2BrightSparks client ID.
- Updated: Quicker opening profile modification window
- Fixed (Pro): Uploading large files (2GB plus) to ShareFile can sometimes freeze at the end of the upload
- Fixed (Pro): Shared settings could not be used with HTTP Download
- Fixed: Pop-up menu for group (when modifying) was available even if not a group queue
- Fixed: If just parameters for profiles in a group queue were changed then main display was not updated
- Fixed (Free): Checkbox to create a group queue was incorrectly enabled in New Profile wizard
- Fixed: When restoring SyncBack window from minimized to maximized (and tray icon not used) may get black space at top of window
- Fixed (SE/Pro): Group Queues run periodically will run many times
- Fixed: In profile configuration may not connect to network share
New in SyncBackPro 11.3.3.0 Beta (Feb 10, 2024)
- New (Pro/SE): Can import profiles from profile backup (via Export / Import main menu)
- Updated: Recompiled using latest Delphi compiler
- Updated: Next Run column will append "(Periodically)" if profile set to run scheduled and periodically and next run is via periodical
- Updated: Windows 11 dark mode improved (window border is dark)
- Updated: Added and documented shortcut keys when modifying profiles in a group
- Updated: When profile is running the Running column in main window states if integrity check, simulation or restore
- Updated: If a remote desktop connection is being used then the style is forced to Windows
- Updated: Installer is more likely to get the correct serial number when upgrading and more than one serial is in the system
- Updated: Log history on main page of log file will show 7 days maximum instead of 5
- Updated (Pro): Icon in main window shows when profile is running an integrity check
- Updated (Pro): Retry when an error occurs during metadata retrieval (AWS S3 and compatibles)
- Updated (Pro/SE): Warnings on When pages when using a Group Queue. Help file also updated.
- Updated (Pro/SE): When testing file copying methods can also use compressed traffic option
- Updated (Pro): Support for Azure Cold blob tier
- Updated (Pro/SE): Windows System Restore Points not supported on Windows Server
- Updated (Pro): Can use your own Google Drive Client ID and Secret. Preparation for not being able to use 2BrightSparks client ID.
- Updated: Quicker opening profile modification window
- Fixed (Pro): Uploading large files (2GB plus) to ShareFile can sometimes freeze at the end of the upload
- Fixed (Pro): Shared settings could not be used with HTTP Download
- Fixed: Pop-up menu for group (when modifying) was available even if not a group queue
- Fixed: If just parameters for profiles in a group queue were changed then main display was not updated
- Fixed (Free): Checkbox to create a group queue was incorrectly enabled in New Profile wizard
- Fixed: When restoring SyncBack window from minimized to maximized (and tray icon not used) may get black space at top of window
- Fixed (SE/Pro): Group Queues run periodically will run many times
- Fixed: In profile configuration may not connect to network share
New in SyncBackPro 11.3.1.0 Beta (Feb 8, 2024)
- New (Pro/SE): Can import profiles from profile backup (via Export / Import main menu)
New in SyncBackPro 11.2.47.0 Beta (Feb 6, 2024)
- Updated: Recompiled using latest Delphi compiler
- Updated: Next Run column will append "(Periodically)" if profile set to run scheduled and periodically and next run is via periodical
- Updated: Windows 11 dark mode improved (window border is dark)
- Updated: Added and documented shortcut keys when modifying profiles in a group
- Updated: When profile is running the Running column in main window states if integrity check, simulation or restore
New in SyncBackPro 11.2.45.0 Beta (Jan 30, 2024)
- Updated: If a remote desktop connection is being used then the style is forced to Windows
- Updated (Pro): Support for Azure Cold blob tier
New in SyncBackPro 11.2.43.0 Beta (Jan 24, 2024)
- Updated: Recompiled using latest Delphi compiler
- Updated: Next Run column will append "(Periodically)" if profile set to run scheduled and periodically and next run is via periodical
- Updated: Windows 11 dark mode improved (window border is dark)
- Updated: Added and documented shortcut keys when modifying profiles in a group
- Updated: When profile is running the Running column in main window states if integrity check, simulation or restore
- Updated (Pro): Icon in main window shows when profile is running an integrity check
- Updated (Pro): Retry when an error occurs during metadata retrieval (AWS S3 and compatibles)
- Updated (Pro/SE): Warnings on When pages when using a Group Queue. Help file also updated.
- Updated (Pro/SE): When testing file copying methods can also use compressed traffic option
- Fixed (Pro): Uploading large files (2GB plus) to ShareFile can sometimes freeze at the end of the upload
- Fixed (Pro): Shared settings could not be used with HTTP Download
- Fixed: Pop-up menu for group (when modifying) was available even if not a group queue
- Fixed: If just parameters for profiles in a group queue were changed then main display was not updated
- Fixed (Free): Checkbox to create a group queue was incorrectly enabled in New Profile wizard
- Fixed: When restoring SyncBack window from minimized to maximized (and tray icon not used) may get black space at top of window
- Fixed (SE/Pro): Group Queues run periodically will run many times
- Fixed: In profile configuration may not connect to network share
New in SyncBackPro 11.2.42.0 Beta (Jan 24, 2024)
- Updated (Pro): Retry when an error occurs during metadata retrieval (AWS S3 and compatibles)
- Updated (Pro/SE): Warnings on When pages when using a Group Queue. Help file also updated.
- Updated (Pro/SE): When testing file copying methods can also use compressed traffic option
New in SyncBackPro 11.2.40.0 Beta (Jan 19, 2024)
- Fixed: Pop-up menu for group (when modifying) was available even if not a group queue
- Fixed: If just parameters for profiles in a group queue were changed then main display was not updated
- Fixed (Free): Checkbox to create a group queue was incorrectly enabled in New Profile wizard
- Fixed: When restoring SyncBack window from minimized to maximized (and tray icon not used) may get black space at top of window
- Fixed (SE/Pro): Group Queues run periodically will run many times
New in SyncBackPro 11.2.39.0 Beta (Jan 17, 2024)
- Updated: Recompiled using latest Delphi compiler
- Updated: Next Run column will append "(Periodically)" if profile set to run scheduled and periodically and next run is via periodical
- Updated: Windows 11 dark mode improved (window border is dark)
- Updated: Added and documented shortcut keys when modifying profiles in a group
- Updated: When profile is running the Running column in main window states if integrity check, simulation or restore
- Updated (Pro): Icon in main window shows when profile is running an integrity check
- Fixed (Pro): Uploading large files (2GB plus) to ShareFile can sometimes freeze at the end of the upload
- Fixed (Pro): Shared settings could not be used with HTTP Download
- Fixed: Pop-up menu for group (when modifying) was available even if not a group queue
- Fixed: If just parameters for profiles in a group queue were changed then main display was not updated
New in SyncBackPro 11.2.38.0 Beta (Jan 17, 2024)
- Updated: Windows 11 dark mode improved (window border is dark)
- Updated: Added and documented shortcut keys when modifying profiles in a group
- Updated: When profile is running the Running column in main window states if integrity check, simulation or restore
- Updated (Pro): Icon in main window shows when profile is running an integrity check
- Fixed (Pro): Uploading large files (2GB plus) to ShareFile can sometimes freeze at the end of the upload
- Fixed (Pro): Shared settings could not be used with HTTP Download
New in SyncBackPro 11.2.37.0 Beta (Jan 16, 2024)
- Fixed: If just parameters for profiles in a group queue were changed then display not updated
New in SyncBackPro 11.2.35.0 Beta (Jan 12, 2024)
- Fixed (Pro): Shared settings could not be use with HTTP Download
- Fixed: Pop-up menu for group was available even if not a group queue
New in SyncBackPro 11.2.34.0 Beta (Jan 10, 2024)
- Updated: Recompiled using latest Delphi compiler
- Updated: Next Run column will append "(Periodically)" if profile set to run scheduled and periodically and next run is via periodical
- Fixed (Pro): Uploading large files (2GB plus) to ShareFile can sometimes freeze at the end of the upload
New in SyncBackPro 11.2.33.0 (Jan 9, 2024)
- New: -delay command line parameter
- New (SE/Pro): Button on Fast Backup settings not to rescan when using Archival Fast Backup
- New (Pro): Several new script functions, e.g. LeftStr, StartsText, ReplaceStr, etc.
- New (Pro): CustomFilter script (which makes use of new MatchesMask script function)
- New: Option to scan neither source/left or destination/right when choosing files and folders
- Updated: To avoid issues with multi-monitor setups SyncBack will briefly appear and minimize when set to run on login
- Updated (SE/Free): Profiles not automatically imported if other edition of SyncBack is installed for current user only
- Updated: Better feedback when importing password protected profiles and decryption not possible
- Fixed (Pro): Fixes to Secrets Manager window
- Fixed (Pro/SE): Rapid Transfer setting was ignored when testing connection to SyncBack Touch
- Fixed: Was reverting to default Windows style when using Windows screen reader even when SyncBack configured not to use screen reader
- Fixed (Pro): Expiring Exchange/EWS tokens with OAUTH when backing up email
- Fixed (Pro): Problems with meta-data when files exported from Amazon S3 to other S3 compatible services (e.g. R2) using 3rd party software
- Fixed (Pro): Scanning of R2 when over 1000 files in a folder
- Fixed (Pro/SE): Files ignored (and warning given) if names or attributes are deemed invalid by the O/S where SyncBack Touch is running
- Fixed (Pro): Google Docs files (on Google Drive) downloaded again even when no changes
- Fixed (Pro): Fix throttling looping issue when uploaded file names contain illegal/invalid characters (OneDrive and SharePoint)
- Fixed: Slow to start first time after installing
- Fixed: Aborting a verify sometimes does not result in a copy failure
New in SyncBackPro 11.2.30.0 Beta (Jan 2, 2024)
- New: -delay command line parameter
- New (SE/Pro): Button on Fast Backup settings not to rescan when using Archival Fast Backup
- New (Pro): Several new script functions, e.g. LeftStr, StartsText, ReplaceStr, etc.
- New (Pro): CustomFilter script (which makes use of new MatchesMask script function)
- New: Option to scan neither source/left or destination/right when choosing files and folders
- Updated: To avoid issues with multi-monitor setups SyncBack will briefly appear and minimize when set to run on login
- Updated (SE/Free): Profiles not automatically imported if other edition of SyncBack is installed for current user only
- Updated: Better feedback when importing password protected profiles and decryption not possible
- Fixed (Pro): Fixes to Secrets Manager window
- Fixed (Pro/SE): Rapid Transfer setting was ignored when testing connection to SyncBack Touch
- Fixed: Was reverting to default Windows style when using Windows screen reader even when SyncBack configured not to use screen reader
- Fixed (Pro): Expiring Exchange/EWS tokens with OAUTH when backing up email
- Fixed (Pro): Problems with meta-data when files exported from Amazon S3 to other S3 compatible services (e.g. R2) using 3rd party software
- Fixed (Pro): Scanning of R2 when over 1000 files in a folder
- Fixed (Pro/SE): Files ignored (and warning given) if names or attributes are deemed invalid by the O/S where SyncBack Touch is running
- Fixed (Pro): Google Docs files (on Google Drive) downloaded again even when no changes
- Fixed (Pro): Fix throttling looping issue when uploaded file names contain illegal/invalid characters (OneDrive and SharePoint)
- Fixed: Slow to start first time after installing
New in SyncBackPro 11.2.28.0 Beta (Dec 19, 2023)
- Fixed (Pro/SE): Files ignored (and warning given) if names or attributes are deemed invalid by the O/S where SyncBack Touch is running
- Fixed (Pro): Google Docs files (on Google Drive) downloaded again even when no changes
- Fixed (Pro): Fix throttling looping issue when uploaded file names contain illegal/invalid characters (OneDrive and SharePoint)
- Fixed: Slow to start first time after installing
New in SyncBackPro 11.2.27.0 Beta (Dec 15, 2023)
- New: -delay command line parameter
- New (SE/Pro): Button on Fast Backup settings not to rescan when using Archival Fast Backup
- New (Pro): Several new script functions, eg LeftStr, StartsText, ReplaceStr, etc
- New (Pro): CustomFilter script (which makes use of new MatchesMask script function)
- New: Option to scan neither source/left or destination/right when choosing files and folders
- Updated: To avoid issues with multi-monitor setups SyncBack will briefly appear and minimize when set to run on login
- Updated (SE/Free): Profiles not automatically imported if other edition of SyncBack is installed for current user only
- Fixed (Pro): Fixes to Secrets Manager window
- Fixed (Pro/SE): Rapid Transfer setting was ignored when testing connection to SyncBack Touch
- Fixed: Was reverting to default Windows style when using Windows screen reader even when SyncBack configured not to use screen reader
- Fixed (Pro): Expiring Exchange/EWS tokens with OAUTH when backing up email
- Fixed (Pro): Problems with meta-data when files exported from Amazon S3 to other S3 compatible services (eg R2) using 3rd party software
- Fixed (Pro): Scanning of R2 when over 1000 files in a folder
New in SyncBackPro 11.2.26.0 Beta (Dec 14, 2023)
- Fixed: Was reverting to default Windows style when using Windows screen reader even when SyncBack configured not to use screen reader
- Fixed (Pro): Expiring Exchange/EWS tokens with OAUTH when backing up email
- Fixed (Pro): Problems with meta-data when files exported from Amazon S3 to other S3 compatible services (e.g. R2) using 3rd party software
- Fixed (Pro): Scanning of R2 when over 1000 files in a folder
New in SyncBackPro 11.2.23.0 Beta (Dec 4, 2023)
- Fixed (Pro/SE): Rapid Transfer setting was ignored when testing connection to SyncBack Touch
- Fixed (Pro): Expiring Exchange/EWS tokens with OAUTH when backing up email
New in SyncBackPro 11.2.22.0 Beta (Dec 1, 2023)
- New: -delay command line parameter
- Updated: To avoid issues with multi-monitor setups SyncBack will briefly appear and minimize when set to run on login
- Updated (SE/Free): Profiles not automatically imported if other edition of SyncBack is installed for current user only
- Fixed (Pro): Fixes to Secrets Manager window
New in SyncBackPro 11.2.21.0 Beta (Nov 30, 2023)
- Fixed: Was reverting to default Windows style when using Windows screen reader even when SyncBack configured not to use screen reader
New in SyncBackPro 11.2.20.0 Beta (Nov 28, 2023)
- Fixed (Pro/SE): Rapid Transfer setting was ignored when testing connection to SyncBack Touch
New in SyncBackPro 11.2.19.0 Beta (Nov 27, 2023)
- Updated: To avoid issues with multi-monitor setups SyncBack will briefly appear and minimize when set to run on login
- Updated (SE/Free): Profiles not automatically imported if other edition of SyncBack is installed for current user only
- Fixed: Fixes to Secrets Manager window
New in SyncBackPro 11.2.18.0 Beta (Nov 20, 2023)
- New: -delay command line parameter
New in SyncBackPro 10.2.147.0 (Nov 10, 2023)
- Updated: Installer shows who SyncBack will run be run as if run from installer
- Fixed (Pro): Correctly display amount of bytes being moved during object copy (S3)
- Fixed (Pro): Treat HTTP error 400 as a throttle response to requests (SharePoint/OneDrive)
- Fixed (Pro): Correctly set object metadata for files larger than 5 GB in size (S3)
- Fixed (Pro): Box authorization URL
New in SyncBackPro 11.2.14.0 Beta (Nov 7, 2023)
- Fixed (Pro): Box authorization URL
New in SyncBackPro 11.2.11.0 Beta (Oct 30, 2023)
- Updated (Pro): FTP buffer size settings now used in all SFTP engines
New in SyncBackPro 11.2.10.0 Beta (Oct 27, 2023)
- Updated (Pro/SE): Can pass offline UA serial to installer
- Fixed: Vertical lines at edge of list in Differences window
- Fixed: Not starting maximized
- Fixed (Pro): Correctly display amount of bytes being moved during object copy (S3)
- Fixed (Pro): Treat HTTP error 400 as a throttle response to requests (SharePoint/OneDrive)
- Fixed (Pro): Correctly set object metadata for files larger than 5 GB in size (S3)
New in SyncBackPro 11.2.9.0 Beta (Oct 26, 2023)
- Updated (Pro): FTP buffer size settings now used in all SFTP engines
New in SyncBackPro 11.2.6.0 Beta (Oct 13, 2023)
- Fixed: Vertical lines at edge of list in Differences window
- Fixed: Not starting maximized
New in SyncBackPro 11.2.5.0 (Oct 10, 2023)
- New (Pro/SE): XZ and ZStandard compression
- New: A new option on Compression -> Compressed settings page to not compress files considered already compressed
- Updated (Pro): Compression filter (already compressed file types) can now be used with PKWare SecureZip encryption
- Updated: Main window column widths, order and visibility immediately saved when changes are made
- Updated: "Stop using screen reader" menu item appears in Preferences main menu if a screen reader is being used
- Updated (Pro): Added Israel AWS S3 Endpoint
- Updated: Splash screen removed (tray icon animates instead)
- Fixed (Pro): "bad_request: Invalid API request path" error during a file update with Box API
- Fixed (Pro/SE): Failure to scan Zip archives with files over 2GB in size when using LZMA2
- Fixed: Loses column widths etc. if start minimized and do not show main window before exiting
- Fixed: SyncBack may fail to retrieve information from Scheduler Monitor
- Fixed: Internal changes to how windows are minimized and restored
New in SyncBackPro 10.2.141.0 (Oct 10, 2023)
- Fixed (Pro): "bad_request: Invalid API request path" error during a file update with Box API
- Updated (Pro): Added Israel AWS S3 Endpoint
New in SyncBackPro 11.2.3.0 Beta (Oct 9, 2023)
- New (Pro/SE): XZ and ZStandard compression
- New: A new option on Compression -> Compressed settings page to not compress files considered already compressed
- Updated (Pro): Compression filter (already compressed file types) can now be used with PKWare SecureZip encryption
- Updated: Main window column widths, order and visibility immediately saved when changes are made
- Updated: "Stop using screen reader" menu item appears in Preferences main menu if a screen reader is being used
- Updated (Pro): Added Israel AWS S3 Endpoint
- Updated: Splash screen removed (tray icon animates instead)
- Fixed (Pro): "bad_request: Invalid API request path" error during a file update with Box API
- Fixed (Pro/SE): Failure to scan Zip archives with files over 2GB in size when using LZMA2
- Fixed: Loses column widths etc. if start minimized and do not show main window before exiting
- Fixed: SyncBack may fail to retrieve information from Scheduler Monitor
- Fixed: Internal changes to how windows are minimized and restored
New in SyncBackPro 11.2.1.0 Beta (Oct 4, 2023)
- New (Pro/SE): XZ and ZStandard compression
- New: A new option on Compression -> Compressed settings page to not compress files considered already compressed
- Updated (Pro): Compression filter (already compressed file types) can now be used with PKWare SecureZip encryption
- Updated: Main window column widths, order and visibility immediately saved when changes are made
- Updated: "Stop using screen reader" menu item appears in Preferences main menu if a screen reader is being used
- Updated (Pro): Added Israel AWS S3 Endpoint
- Updated: Splash screen removed
- Fixed (Pro): "bad_request: Invalid API request path" error during a file update with Box API
- Fixed (Pro/SE): Failure to scan Zip archives with files over 2GB in size when using LZMA2
- Fixed: Loses column widths etc. if start minimized and do not show main window before exiting
- Fixed: SyncBack may fail to retrieve information from Scheduler Monitor
- Fixed: Internal changes to how windows are minimized and restored
New in SyncBackPro 11.2.0.0 Beta (Sep 29, 2023)
- New (Pro/SE): XZ and ZStandard compression
- New: A new option on Compression -> Compressed settings page to not compress files considered already compressed
- Updated (Pro): Compression filter (already compressed file types) can now be used with PKWare SecureZip encryption
New in SyncBackPro 11.1.7.0 Beta (Sep 19, 2023)
- New (Pro): XZ and ZStandard compression (not yet working and not tested, do not use!)
- Fixed (Pro): "bad_request: Invalid API request path" error during a file update with Box API
- Fixed (Pro/SE): Failure to scan Zip archives with files over 2GB in size when using LZMA2
- Fixed: Loses column widths etc. if start minimized and do not show main window before exiting
- Fixed: SyncBack may fail to retrieve information from Scheduler Monitor
- Updated: Main window column widths, order and visibility immediately saved when changes are made
- Updated: "Stop using screen reader" menu item appears in Preferences main menu if a screen reader is being used
- Updated (Pro): Added Israel AWS S3 Endpoint
New in SyncBackPro 11.1.4.0 Beta (Sep 12, 2023)
- New (Pro): XZ and ZStandard compression (not yet working and not tested, do not use!)
- Fixed (Pro): "bad_request: Invalid API request path" error during a file update with Box API
- Fixed (Pro/SE): Failure to scan Zip archives with files over 2GB in size when using LZMA2
- Updated: Main window column widths, order and visibility immediately saved when changes are made
- Updated: "Stop using screen reader" menu item appears in Preferences main menu if a screen reader is being used
- Updated (Pro): Added Israel AWS S3 Endpoint
New in SyncBackPro 10.2.140.0 Beta (Sep 11, 2023)
- Updated (Pro): Added Israel AWS S3 Endpoint
New in SyncBackPro 11.1.3.0 Beta (Sep 11, 2023)
- New (Pro): XZ and ZStandard compression (not yet working and not tested, do not use!)
- Fixed (Pro): "bad_request: Invalid API request path" error during a file update with Box API
- Updated: Main window column widths, order and visibility immediately saved when changes are made
- Updated: "Stop using screen reader" menu item appears in Preferences main menu if a screen reader is being used
- Updated (Pro): Added Israel AWS S3 Endpoint
New in SyncBackPro 10.2.138.0 (Aug 28, 2023)
- Updated (Pro): S3 regions
- Updated: About window shows some system info
- Fixed (Pro): Change for AWS S3 to ignore socket error 10060 when in thread operation, in order to give the thread a chance to retry
- Fixed (Pro): Creating S3 buckets in newer regions
- Fixed (Pro): Stop retrying to create folders on Egnyte if it already exists
- Fixed (Pro): Egnyte now allows files with DWL, DWL1, DWL2 extensions to be uploaded
- Fixed (Pro): Better handling of expired access tokens when using Backblaze
- Fixed: Sometimes crashes on variables window in profile configuration
- Fixed (Pro): Retrieves all SharePoint Document libraries in the case the user has more than 200 libraries per site
New in SyncBackPro 11.1.1.0 (Aug 28, 2023)
- Fixed: Scheduler Monitor incorrectly states profiles not run by scheduler
New in SyncBackPro 11.0.1.0 (Aug 28, 2023)
- New: Chunked upload support for Box
- Updated: About window shows some system info
- Updated: Logging of reason why files skipped is no longer enabled by default
- Updated: Swedish translations
- Updated: Scheduler Monitor service modified to try and avoid warning about schedules that were run later when missed (e.g. computer off)
- Fixed (Pro): Stop retrying to create folders on Egnyte if it already exists
- Fixed (Pro): Egnyte now allows files with DWL, DWL1, DWL2 extensions to be uploaded
- Fixed (Pro): Better handling of expired access tokens when using Backblaze
- Fixed (Pro/SE): Out of memory error when using LZMA2 with very large files and no Zip temp directory specified
- Fixed: Sometimes crashes on variables window in profile configuration
- Fixed (Pro): Retrieves all SharePoint Document libraries in the case the user has more than 200 libraries per site
New in SyncBackPro 11.0.0.31 Beta (Aug 23, 2023)
- Fixed (Pro): Retrieves all SharePoint Document libraries in the case the user has more than 200 libraries per site
New in SyncBackPro 11.0.0.30 Beta (Aug 23, 2023)
- Updated: About window shows some system info
New in SyncBackPro 11.0.0.28 Beta (Aug 21, 2023)
- Updated: Logging of reason why files skipped is no longer enabled by default
- Fixed (Pro): Stop retrying to create folders on Egnyte if it already exists
- Fixed: Sometimes crashes on variables window in profile configuration
New in SyncBackPro 11.0.0.27 Beta (Aug 21, 2023)
- Fixed (Pro): Stop retrying to create folders on Egnyte if it already exists.
New in SyncBackPro 11.0.0.26 Beta (Jul 25, 2023)
- Updated: About window shows some system info.
New in SyncBackPro 11.0.0.25 (Jul 23, 2023)
- New: You can enable or disable existing scheduled tasks for a profile
- New (Pro/SE): %IGNORE_ERR% variable to use with %LABEL=%, %SERIAL=% and %HWSERIAL=%
- Updated (Pro/SE): When creating shortcuts to run profile it will take into account if profile must or must not be run elevated
- Updated: Updated French, Dutch, Finnish, Italian and Russian translations
- Updated: Scheduler Monitor Service notifications now shows date and time profile was supposed to be run
- Updated: Scheduler Monitor Service notifications window only appears once (and is updated)
- Updated: Scheduler Monitor Service notifications will indicate if there is a problem updating the warnings
- Updated (Pro): S3 regions
- Updated (Pro): When an action cannot be performed it is now clear if it is due to SBMS or group policy settings
- Updated (Pro/SE): Increase connection reliability with Touch on Android (V1.7.7 and newer)
- Fixed (Pro): Change for AWS S3 to ignore socket error 10060 when in thread operation, in order to give the thread a chance to retry
- Fixed (Pro): Incorrect alignment for Connections list in Secrets Manager
- Fixed (Pro): Creating S3 buckets in newer regions
- Fixed (Pro/SE): The bypass UAC task scheduler entry had same name as run on login
New in SyncBackPro 11.0.0.25 Beta (Jul 21, 2023)
- New: You can enable or disable existing scheduled tasks for a profile
- New (Pro/SE): %IGNORE_ERR% variable to use with %LABEL=%, %SERIAL=% and %HWSERIAL=%
- Updated (Pro/SE): When creating shortcuts to run profile it will take into account if profile must or must not be run elevated
- Updated: Updated French, Dutch, Finnish, Italian and Russian translations
- Updated: Scheduler Monitor Service notifications now shows date and time profile was supposed to be run
New in SyncBackPro 11.0.0.23 Beta (Jul 18, 2023)
- Updated (Pro/SE): Increase connection reliability with Touch on Android (V1.7.7 and newer)
New in SyncBackPro 11.0.0.22 Beta (Jul 17, 2023)
- Updated (Pro): When an action cannot be performed it is now clear if it is due to SBMS or group policy settings
New in SyncBackPro 11.0.0.20 Beta (Jul 14, 2023)
- Fixed (Pro): Change for AWS S3 to ignore socket error 10060 when in thread operation, in order to give the thread a chance to retry
- Fixed (Pro): Incorrect alignment for Connections list in Secrets Manager
- Fixed (Pro): Creating S3 buckets in newer regions
- Fixed: Scheduler Monitor Service notifications will indicate if there is a problem updating the warnings
- Fixed: Scheduler Monitor Service notifications window only appears once (and is updated)
- Fixed (Pro/SE): The bypass UAC task scheduler entry had same name as run on login
- Updated (Pro/SE): When creating shortcuts to run profile it will take into account if profile must or must not be run elevated
- Updated: Updated French, Dutch, Finnish and Russian translations
- Updated (Pro): S3 regions
New in SyncBackPro 11.0.0.17 Beta (Jul 10, 2023)
- Fixed: Scheduler Monitor Service notifications
- will
- indicate if there is a problem updating the warnings
- Fixed (Pro/SE): The bypass UAC task scheduler entry had same name as run on login
- Updated: Updated French, Dutch and Russian translations
New in SyncBackPro 11.0.0.16 Beta (Jul 7, 2023)
- Fixed (Pro): Change for AWS S3 to ignore socket error 10060 when in thread operation, in order to give the thread a chance to retry
- Fixed (Pro): Incorrect alignment for Connections list in Secrets Manager
- Updated: French translations
New in SyncBackPro 11.0.0.15 (Jul 3, 2023)
- A new freeware SysLog server and client has been released.
- New: Scheduler Monitor Service introduced which can help detect profiles that are not being run by the Windows Task Scheduler
- New (Pro/SE): 7zip compatible LZMA2 compression and encryption (the Zip header can be encrypted so the contained filenames cannot be seen)
- New (Pro): Secrets Manager to store usernames, passwords and private keys
- New (Pro): Files can be copied from HTTP
- New (SE): SyncBackSE now supports LZMA and BZip2 compression along with the new LZMA2 compression and encryption. This also means email log files can use higher compression (LZMA)
- New (Pro/SE): You can automatically download files from HTTP, when using FTP, to increase performance
- New (Pro/SE): Group Queue profiles. These are similar to the traditional Groups except you can configure how a profile in the group queue is run (e.g. an Integrity check) and the same profile can be in a group queue multiple times. They also use fewer resources.
- New (Pro): Cloudflare R2 support (S3 compatible service)
- New (Pro): Support for SSE-C with native Backblaze B2
- New (Pro/SE): Option to compress network traffic (SMB, Windows 10 or better)
- New (Pro): Script Debugging
- New: You can now choose an action to take if two files are considered to be identical
- New: All system volumes can be accessed with the path \?
- New: New shared settings can be created from the Manage Shared Settings window. Previously they could only be created when modifying a profile.
- New: Shared settings can be modified from the Manage Shared Settings window. Previously they could only be modified when modifying a profile that uses those shared settings.
- New: You can rename shared settings from the Manage Shared Settings window.
- New: Shared settings can be exported and imported from the Manage Shared Settings window.
- New: File copying methods can be tested
- New: In the Differences window, you can filter based on the filename or extension. Wildcards (* and ?) are supported
- New: In the Differences window, you can configure it so that a double-click on a folder will automatically add it to the filter so only that directory and its contents are shown
- New: In the Differences window, there are more filter options. You can also click on the Totals grid to filter.
- New: A hotkey can be defined for SyncBack itself (the hotkey is shown in the tray icon hint)
- New: A new profile configuration page (Links) has been created to centralize settings related to shortcuts, offline files, symbolic links, hard links, etc.
- New: On the profile History page you can export all the history
- New: In the Global Settings you can re-order the tabs
- New: When modifying a group you can use drag and drop to re-order profiles in a group and to add or remove profiles from the group
- New: The HTML log file now includes a bar chart for easy comparison of the number of files copied on previous runs (last 7)
- New (Pro/SE): Profiles can be configured to run elevated or not elevated. When scheduling such profiles the scheduler is configured as appropriate.
- New (Pro/SE): In Global Settings you can configure Windows to allow elevated processes like SyncBackPro and SyncBackSE to see mapped network drives.
- New (Pro/SE): In Global Settings you can configure create a shortcut to run SyncBackPro or SyncBackSE elevated without a UAC prompt.
- New: Console input (stdin) can be sent to the Run Before and Run After programs from a file
- New: Console output (stdout) from Run Before and Run After can be recorded in the log file
- New: Option to Run After only if the profile failed
- New: Profiles (including groups) can be run automatically when the screen saver is activated or the display is powered off
- New: You can ignore files accessed (or not accessed) between dates or since a date
- New: For Junction Points, you can ignore all of them (as per V10 and earlier), ignore only Windows backward compatibility junction points or not ignore them
- New (Pro/SE): File hard links can be identified and copied as hard links
- New (Pro/SE): File symbolic links can be copied and re-mapped
- New (Pro/SE): Directory symbolic links and junction/reparse points can be copied and re-mapped
- New: Option to ignore hidden and system folders
- New: Option to ignore pinned files and directories
- New: Option to ignore unpinned files and directories
- New: Option to ignore placeholder directories
- New (Pro/SE): When running a profile as a Restore you can create a Windows System Restore Point.
- New: Full (absolute) paths can now be used in filters
- New (Pro): New script constants, e.g. HoursPerDay
- New (Pro): New script functions, e.g. IntRoundTo
- New (Pro): New script properties in SBRunning: LeftType, RightType, LeftIsSource
- New (Pro): New script object SBProfiles
- New: New variables: SERIALOF, LABELOF, HWSERIALOF, DROPBOX, HARDLINKCREATEDSRC, HARDLINKCREATEDDEST, SYMLINKCREATEDSRC, SYMLINKCREATEDDEST, COMPAREHARDLINKTOTAL, COMPARESYMLINKTOTAL, HTTPDOWNLOAD
- New (SE/Pro): -profaffinity command line parameter
- New (Pro): Windows Group Policy settings (ADMX) are available.
- Updated: No more button panels for menus, instead main menus are used
- Updated: Greatly increased group filtering performance (when listing only profiles not in a group)
- Updated: Drives tab on Global Settings initialized faster
- Updated: The Tree Explorer, File Collision and Differences windows show if a file or directory is a link and details on it (if the profile is configured appropriately)
- Updated: The Differences window has been updated so when using a dark style the details at the bottom are dark
- Updated: To save space, leading and trailing slashes are no longer shown in the Differences window
- Updated: The New Profile Wizard lets you create Group Queue profiles
- Updated: The Filters window shows hints for items that are too wide to display entirely, or it contains variables
- Updated: The Restore Wizard automatically hides the History tab if there is no history for the profile
- Updated: The scheduler window now clearly shows if the schedule is daily, weekly or monthly
- Updated: The log file no longer includes unused filter information and instead only shows filters that have been used
- Updated: The log file now splits up the files copied etc. into their own sections. Previously there was only one section ("Copied, deleted, renamed, and changed (123)"), but now they are split into Changes, Copied, Deleted and Renamed
- Updated (Pro/SE): For the webhook calls, if there is no JSON then a GET call is made instead of a POST call
- Updated (Pro): With SyncBack Touch you can now use both Windows Impersonation and SBMS for login for extra security and control
- Updated (Pro): The Azure Speech API has been updated
- Updated (Pro): With Dropbox the native SHA256 hash is automatically used for verification and hash comparison
- Updated (Pro): When creating new scripts, a simple starting template is used as a basis
- Updated: When emailing the log you can choose Direct Send for a simpler configuration
- Updated: When battery saver is enabled in Windows, all running profile are paused and background backups are not started
- Updated: If power is switched to a UPS (Uninterruptible Power Supply) then it is treated as battery saving
- Updated: When a profile is run it SyncBack checks to see if a two or more drives are using the same label or have the same serial (if you are using the label or serial variables)
- Updated: SysLog supports RFC5424
- Updated: Extensive improvements to creating schedules so SyncBack can detect if the user has the access rights to create schedules
- Updated: When scheduling profiles configured to run elevated or not elevated the scheduler is configured as appropriate.
New in SyncBackPro 11.0.0.11 Beta (Jun 27, 2023)
- Value:
- - SyncBackSE now supports LZMA and BZip2 compression along with the new LZMA2 compression and encryption. This also means email log files can use higher compression (LZMA).
- - A new freeware SysLog server and client has been released
- Performance
- - You can automatically download files from HTTP, when using FTP, to increase performance
- - Option to compress network traffic (SMB, Windows 10 or better)
- - Greatly increased group filtering performance (when listing only profiles not in a group)
- - Drives tab on Global Settings initialized faster
- Shared Settings:
- - New shared settings can be created from the Manage Shared Settings window. Previously they could only be created when modifying a profile.
- - Shared settings can be modified from the Manage Shared Settings window. Previously they could only be modified when modifying a profile that uses those shared settings.
- - You can rename shared settings from the Manage Shared Settings window.
- - Shared settings can be exported and imported from the Manage Shared Settings window.
- User Interface:
- - File copying methods can be tested to discover which performs best
- - The Tree Explorer, File Collision and Differences windows show if a file or directory is a link and details on it (if the profile is configured appropriately)
- - In the Differences window, you can filter based on the filename or extension. Wildcards (* and ?) are supported
- - In the Differences window, you can configure it so that a double-click on a folder will automatically add it to the filter so only that directory and its contents are shown
- - In the Differences window, there are more filter options. You can also click on the Totals grid to filter.
- - The Differences window has been updated so when using a dark style the details at the bottom are dark
- - To save space, leading and trailing slashes are no longer shown in the Differences window
- - A hotkey can be defined for SyncBack itself (the hotkey is shown in the tray icon hint)
- - The New Profile Wizard lets you create Group Queue profiles
- - A new profile configuration page (Links) has been created to centralize settings related to shortcuts, offline files, symbolic links, hard links, etc.
- - The Filters window shows hints for items that are too wide to display entirely, or it contains variables
- - The Restore Wizard automatically hides the History tab if there is no history for the profile
- - The scheduler window now clearly shows if the schedule is daily, weekly or monthly
- - On the profile History page you can export all the history
- - In the Global Settings you can re-order the tabs
- - When modifying a group you can use drag and drop to re-order profiles in a group and to add or remove profiles from the group
- - No more button panels for menus, instead main menus are used
- Logging:
- - The HTML log file now includes a bar chart for easy comparison of the number of files copied on previous runs (last 7)
- - The log file no longer includes unused filter information and instead only shows filters that have been used
- - The log file now splits up the files copied etc. into their own sections. Previously there was only one section ("Copied, deleted, renamed, and changed (123)"), but now they are split into Changes, Copied, Deleted and Renamed
- Compression:
- - 7zip compatible LZMA2 compression and encryption
- Cloud:
- - Files can be copied from HTTP
- - Cloudflare R2 support (S3 compatible service)
- - Support for SSE-C with native Backblaze B2 and OVH (S3 mode)
- - For the webhook calls, if there is no JSON then a GET call is made instead of a POST call
- - With SyncBack Touch you can now use both Windows Impersonation and SBMS for login for extra security and control
- - The Azure Speech API has been updated
- - With Dropbox the native SHA256 hash is automatically used for verification and hash comparison
- FTP:
- - You can automatically download files from HTTP, when using FTP, to increase performance
- Security
- - Secrets Manager to access remotely stored usernames, passwords and private keys
- - 7zip compatible LZMA2 encryption (the Zip header can be encrypted so the contained filenames cannot be seen)
- - New installer options for installing SyncBack as a standard Windows user
- - Profiles can be configured to run elevated or not elevated. When scheduling such profiles the scheduler is configured as appropriate.
- - In Global Settings you can configure Windows to allow elevated processes like SyncBackPro and SyncBackSE to see mapped network drives.
- - In Global Settings you can configure create a shortcut to run SyncBackPro or SyncBackSE elevated without a UAC prompt.
- - Windows Group Policy settings (ADMX) are available.
- Scripting:
- - Script Debugging
- - When creating new scripts, a simple starting template is used as a basis
- - New script constants, e.g. HoursPerDay
- - New script functions, e.g. IntRoundTo
- - New script properties in SBRunning: LeftType, RightType, LeftIsSource
- - New script object SBProfiles
- Misc. Functionality:
- - Group Queue profiles (SE/Pro) introduced. These are similar to the traditional Groups except you can configure how a profile in the group queue is run (e.g. an Integrity check) and the same profile can be in a group queue multiple times. They also use fewer resources.
- - You can now choose an action to take if two files are considered to be identical
- - Console input (stdin) can be sent to the Run Before and Run After programs from a file
- - Console output (stdout) from Run Before and Run After can be recorded in the log file
- - Option to Run After only if the profile failed
- - When emailing the log you can choose Direct Send for a simpler configuration
- - Profiles (including groups) can be run automatically when the screen saver is activated or the display is powered off
- - When battery saver is enabled in Windows, all running profile are paused and background backups are not started
- - If power is switched to a UPS (Uninterruptible Power Supply) then it is treated as battery saving
- - You can ignore files accessed (or not accessed) between dates or since a date
- - When a profile is run SyncBack checks to see if two or more drives are using the same label or have the same serial (if you are using the label or serial variables)
- - SysLog supports RFC5424
- - A new freeware SysLog server and client has been released
- - Extensive improvements to creating schedules
- - -profaffinity command line parameter
- File System:
- - All system volumes can be accessed with the path \?
- - Option to ignore hidden and system folders
- - Option to ignore pinned files and directories
- - Option to ignore unpinned files and directories
- - Option to ignore placeholder directories
- - For Junction Points, you can ignore all of them (as per V10 and earlier), ignore only Windows backward compatibility junction points or not ignore them
- - File hard links can be identified and copied as hard links
- - File symbolic links can be copied and re-mapped
- - Option to compress network traffic (SMB, Windows 10 or better)
- - Directory symbolic links and junction/reparse points can be copied and re-mapped
- - When running a profile as a Restore you can create a Windows System Restore Point.
- Windows Task Scheduler:
- - Scheduler Monitor Service introduced which can help detect profiles that are not being run by the Windows Task Scheduler
- - When scheduling profiles configured to run elevated or not elevated the scheduler is configured as appropriate.
- - Extensive improvements to scheduling so SyncBack can detect if the user has the access rights to create schedules. Also, the scheduler window clearly shows if its a daily, weekly or monthly schedule.
- Filters:
- - Full (absolute) paths can now be used in filters
- Variables:
- - New variables: %SERIALOF=%, %LABELOF=%, %HWSERIALOF=%, %DROPBOX%, %HARDLINKCREATEDSRC%, %HARDLINKCREATEDDEST%, %SYMLINKCREATEDSRC%, %SYMLINKCREATEDDEST%, %COMPAREHARDLINKTOTAL%, %COMPARESYMLINKTOTAL%, %HTTPDOWNLOAD%
New in SyncBackPro 10.2.126.0 Beta (Jun 15, 2023)
- Fixed (Pro): When using EWS the email address may not be returned
- Fixed: When using minimize on close the window may appear when DPI changed
New in SyncBackPro 11.0.0.6 Beta (Jun 14, 2023)
- Fixed (Pro): When using EWS the email address may not be returned
- Updated: Checking for access rights to create scheduled tasks
- Updated: Support for rollback from SyncBack V11
New in SyncBackPro 11.0.0.0 Beta (Jun 1, 2023)
- Value:
- SyncBackSE now supports LZMA and BZip2 compression along with the new LZMA2 compression and encryption. This also means email log files can use higher compression (LZMA)
- A new freeware SysLog server and client has been released
- Performance:
- You can automatically download files from HTTP, when using FTP, to increase performance
- Option to compress network traffic (SMB, Windows 10 or better)
- Greatly increased group filtering performance (when listing only profiles not in a group)
- Drives tab on Global Settings initialized faster
- Shared Settings:
- New shared settings can be created from the Manage Shared Settings window. Previously they could only be created when modifying a profile
- Shared settings can be modified from the Manage Shared Settings window. Previously they could only be modified when modifying a profile that uses those shared settings
- You can rename shared settings from the Manage Shared Settings window
- Shared settings can be exported and imported from the Manage Shared Settings window
- User Interface:
- File copying methods can be tested to discover which performs best
- The Tree Explorer, File Collision and Differences windows show if a file or directory is a link and details on it (if the profile is configured appropriately)
- In the Differences window, you can filter based on the filename or extension. Wildcards (* and ?) are supported
- In the Differences window, you can configure it so that a double-click on a folder will automatically add it to the filter so only that directory and its contents are shown
- In the Differences window, there are more filter options. You can also click on the Totals grid to filter
- The Differences window has been updated so when using a dark style the details at the bottom are dark
- To save space, leading and trailing slashes are no longer shown in the Differences window
- A hotkey can be defined for SyncBack itself (the hotkey is shown in the tray icon hint)
- The New Profile Wizard lets you create Group Queue profiles
- A new profile configuration page (Links) has been created to centralize settings related to shortcuts, offline files, symbolic links, hard links, etc
- The Filters window shows hints for items that are too wide to display entirely, or it contains variables
- The Restore Wizard automatically hides the History tab if there is no history for the profile
- The scheduler window now clearly shows if the schedule is daily, weekly or monthly
- On the profile History page you can export all the history
- In the Global Settings you can re-order the tabs
- When modifying a group you can use drag and drop to re-order profiles in a group and to add or remove profiles from the group
- No more button panels for menus, instead main menus are used
- Logging:
- The HTML log file now includes a bar chart for easy comparison of the number of files copied on previous runs (last 7)
- The log file no longer includes unused filter information and instead only shows filters that have been used
- The log file now splits up the files copied etc. into their own sections. Previously there was only one section ("Copied, deleted, renamed, and changed (123)"), but now they are split into Changes, Copied, Deleted and Renamed
- Compression:
- 7zip compatible LZMA2 compression and encryption
- Cloud:
- Files can be copied from HTTP
- Cloudflare R2 support (S3 compatible service)
- Support for SSE-C with native Backblaze B2
- For the webhook calls, if there is no JSON then a GET call is made instead of a POST call
- With SyncBack Touch you can now use both Windows Impersonation and SBMS for login for extra security and control
- The Azure Speech API has been updated
- FTP:
- You can automatically download files from HTTP, when using FTP, to increase performance
- Security:
- Secrets Manager to access remotely stored usernames, passwords and private keys
- 7zip compatible LZMA2 encryption (the Zip header can be encrypted so the contained filenames cannot be seen)
- New installer options for installing SyncBack as a standard Windows user
- Profiles can be configured to run elevated or not elevated. When scheduling such profiles the scheduler is configured as appropriate
- In Global Settings you can configure Windows to allow elevated processes like SyncBackPro and SyncBackSE to see mapped network drives
- In Global Settings you can configure create a shortcut to run SyncBackPro or SyncBackSE elevated without a UAC prompt
- Windows Group Policy settings (ADMX) are available
- Scripting:
- Script Debugging
- When creating new scripts, a simple starting template is used as a basis
- New script constants, e.g. HoursPerDay
- New script functions, e.g. IntRoundTo
- New script properties in SBRunning: LeftType, RightType, LeftIsSource
- New script object SBProfiles
- Misc. Functionality:
- Scheduler Monitor Service introduced which can help detect profiles that are not being run by the Windows Task Scheduler
- Group Queue profiles (SE/Pro) introduced. These are similar to the traditional Groups except you can configure how a profile in the group queue is run (e.g. an Integrity check) and the same profile can be in a group queue multiple times. They also use fewer resources
- You can now choose an action to take if two files are considered to be identical
- Console input (stdin) can be sent to the Run Before and Run After programs from a file
- Console output (stdout) from Run Before and Run After can be recorded in the log file
- Option to Run After only if the profile failed
- When emailing the log you can choose Direct Send for a simpler configuration
- Profiles (including groups) can be run automatically when the screen saver is activated or the display is powered off
- When battery saver is enabled in Windows, all running profile are paused and background backups are not started
- If power is switched to a UPS (Uninterruptible Power Supply) then it is treated as battery saving
- You can ignore files accessed (or not accessed) between dates or since a date
- When a profile is run it SyncBack checks to see if a two or more drives are using the same label or have the same serial (if you are using the label or serial variables)
- SysLog supports RFC5424
- A new freeware SysLog server and client has been released
- Extensive improvements to creating schedules
- File System:
- All system volumes can be accessed with the path \?
- Option to ignore hidden and system folders
- Option to ignore pinned files and directories
- Option to ignore unpinned files and directories
- Option to ignore placeholder directories
- For Junction Points, you can ignore all of them (as per V10 and earlier), ignore only Windows backward compatibility junction points or not ignore them
- File hard links can be identified and copied as hard links
- File symbolic links can be copied and re-mapped
- Option to compress network traffic (SMB, Windows 10 or better)
- Directory symbolic links and junction/reparse points can be copied and re-mapped
- When running a profile as a Restore you can create a Windows System Restore Point
- Windows Task Scheduler:
- Scheduler Monitor Service introduced which can help detect profiles that are not being run by the Windows Task Scheduler
- When scheduling profiles configured to run elevated or not elevated the scheduler is configured as appropriate
- Extensive improvements to scheduling so SyncBack can detect if the user has the access rights to create schedules. Also, the scheduler window clearly shows if its a daily, weekly or monthly schedule
- Filters:
- Full (absolute) paths can now be used in filters
- Variables:
- New variables: %DROPBOX%, %HARDLINKCREATEDSRC%, %HARDLINKCREATEDDEST%, %SYMLINKCREATEDSRC%, %SYMLINKCREATEDDEST%, %COMPAREHARDLINKTOTAL%, %COMPARESYMLINKTOTAL%, %HTTPDOWNLOAD%
New in SyncBackPro 10.2.124.0 Beta (Jun 1, 2023)
- Updated: Checking for access rights to create scheduled tasks
- Updated: Support for rollback from SyncBack V11
New in SyncBackPro 10.2.123.0 Beta (May 26, 2023)
- Updated: Checking for access rights to create scheduled tasks
New in SyncBackPro 10.2.122.0 (May 23, 2023)
- Updated: Possible crash on program start on pre-Windows 10, e.g. Windows Server 2016
- Updated: Profiles that run On Change do not use too many resources when they are using invalid directories
- Updated: Manifest file corrected so interface scales correctly on Windows Server 2016
- Updated: Connection timeout for email (send and retrieve) changed to 15 seconds from 60 seconds
- Fixed: Possible loop when profile run On Change and set to delete all empty directories and there are non-empty read-only directories
- Fixed: Default settings when using Microsoft SMTP email servers
- Fixed (Pro): Unable to change SBMS connection settings if not an SBMS administrator
New in SyncBackPro 10.2.121.0 Beta (May 22, 2023)
- Updated: Possible app crash on program start on pre-Windows 10, e.g. Windows Server 2016
- Updated: Profiles that run On Change do not use too many resources when they are using invalid directories
- Updated: Manifest file corrected so interface scales correctly on Windows Server 2016
- Updated: Connection timeout for email (send and retrieve) changed to 15 seconds from 60 seconds
- Fixed: Possible loop when profile run On Change and set to delete all empty directories and there are non-empty read-only directories
- Fixed: Default settings when using Microsoft SMTP email servers
- Fixed (Pro): Unable to change SBMS connection settings if not an SBMS administrator
New in SyncBackPro 10.2.119.0 Beta (May 15, 2023)
- Updated: Catch exceptions on process initialization
- Updated: Profiles that run On Change do not use too many resources when they are using invalid directories
New in SyncBackPro 10.2.118.0 Beta (May 12, 2023)
- Updated:
- Shell extension pop-up menu text changed to "Encrypt/Decrypt with EncryptOnClick"
New in SyncBackPro 10.2.117.0 Beta (May 11, 2023)
- Updated: Catch exceptions on process initialization
New in SyncBackPro 10.2.116.0 (May 9, 2023)
- Fixed (Pro): Set timestamps when using Chilkat and SSH File Transfer Protocol version less than 6
- Fixed (Pro): Modifying SBMS connection settings
- Fixed: Ransomware detection when restoring
New in SyncBackPro 10.2.115.0 Beta (May 5, 2023)
- Fixed (Pro): Set timestamps when using Chilkat and SSH File Transfer Protocol version less than 6
- Fixed (Pro): Modifying SBMS connection settings
- Fixed: Ransomware detection when restoring
New in SyncBackPro 10.2.114.0 Beta (Apr 26, 2023)
- Fixed (Pro): Modifying SBMS connection settings
New in SyncBackPro 10.2.113.0 Beta (Apr 21, 2023)
- Fixed (Pro): Set timestamps when using Chilkat and SSH File Transfer Protocol version less than 6
New in SyncBackPro 10.2.112.0 (Apr 18, 2023)
- New: %ACTUALSOURCE% and %ACTUALDEST% variables
- New: Can scroll Advanced tab of Restore Wizard using mouse wheel
- Fixed: Main window not maximizing on start
- Fixed: Stack overflow (and crash) when scanning (due to getting symbolic link last access date and time)
- Fixed: SyncBack would sometimes raise an error that a SyncBack Touch drive did not exist
- Fixed (Pro): Change in SharePoint to try redirecting downloads with more than one redirections
- Fixed (Pro): Do not invalidate access token if error is 403 Forbidden as it may end in a loop and cause the server to invalidate the refresh token (OneDrive)
- Fixed: Advanced tab of Restore Wizard sometimes did not show scroll bars unless resized
- Fixed: Windows shortcut configured to start SyncBack minimized or maximized was not starting SyncBack correctly
- Fixed: If Windows shortcut starts SyncBack minimized then no splash windows displayed
New in SyncBackPro 10.2.111.0 Beta (Apr 17, 2023)
- New: %ACTUALSOURCE% and %ACTUALDEST% variables
- New: Can scroll Advanced tab of Restore Wizard using mouse wheel
- Fixed: Main window not maximizing on start
- Fixed: Stack overflow (and crash) when scanning (due to getting symbolic link last access date and time)
- Fixed: SyncBack would sometimes raise an error that a SyncBack Touch drive did not exist
- Fixed (Pro): Change in SharePoint to try redirecting downloads with more than one redirections
- Fixed (Pro): Do not invalidate access token if error is 403 Forbidden as it may end in a loop and cause the server to invalidate the refresh token (OneDrive)
- Fixed: Advanced tab of Restore Wizard sometimes did not show scroll bars unless resized
- Fixed: Windows shortcut configured to start SyncBack minimized or maximized was not starting SyncBack correctly
- Fixed: If Windows shortcut starts SyncBack minimized then no splash windows displayed
New in SyncBackPro 10.2.110.0 Beta (Apr 12, 2023)
- New: %ACTUALSOURCE% and %ACTUALDEST% variables
- Fixed: Main window not maximizing on start
- Fixed: Stack overflow (and crash) when scanning (due to getting symbolic link last access date and time)
- Fixed: SyncBack would sometimes raise an error that a SyncBack Touch drive did not exist
- Fixed (Pro): Do not invalidate access token if error is 403 Forbidden as it may end in a loop and cause the server to invalidate the refresh token (OneDrive)
New in SyncBackPro 10.2.108.0 Beta (Apr 10, 2023)
- Fixed: Main window not maximizing on start
- Fixed: Stack overflow (and crash) when scanning (due to getting symbolic link last access date and time)
- Fixed: SyncBack would sometimes raise an error that a SyncBack Touch drive did not exist
- Fixed (Pro): Do not invalidate access token if error is 403 Forbidden as it may end in a loop and cause the server to invalidate the refresh token (OneDrive)
New in SyncBackPro 10.2.106.0 Beta (Mar 30, 2023)
- Fixed: Stack overflow (and crash) when scanning (due to getting symbolic link last access date and time)
New in SyncBackPro 10.2.103.0 Beta (Mar 20, 2023)
- Fixed: Main window not maximizing on start
New in SyncBackPro 10.2.100.0 Beta (Mar 9, 2023)
- Fixed: Main window not maximizing on start
New in SyncBackPro 10.2.99.0 (Mar 8, 2023)
- New: Will use SYNCBACKTEMP environment variable as directory for all temporary files if it exists
- Updated: Numerous updates to creating, modifying and deleting schedules and help file updated
- Fixed (Pro): When using shared settings the refresh token may not be updated while multiple profiles using same cloud are being run
- Fixed (Pro): Unable to select Ransomware file when using Google Drive
- Fixed (Pro): Was trying to delete legacy folders from Azure
- Fixed: Rollback pop-up menu in Restore Wizard was not initialized unless History tab was displayed
- Fixed: Fixes for DPI and small font size
New in SyncBackPro 10.2.96.0 Beta (Mar 2, 2023)
- New: Will use SYNCBACKTEMP environment variable as directory for all temporary files if it exists
- Updated: Numerous updates to creating, modifying and deleting schedules and help file updated
- Fixed (Pro): When using shared settings the refresh token may not be updated while multiple profiles using same cloud are being run
- Fixed (Pro): Unable to select Ransomware file when using Google Drive
- Fixed (Pro): Was trying to delete legacy folders from Azure
- Fixed: Rollback pop-up menu in Restore Wizard was not initialized unless History tab was displayed
- Fixed: Fixes for DPI and small font size
New in SyncBackPro 10.2.94.0 Beta (Mar 1, 2023)
- Fixed: Fixes for DPI and small font size
New in SyncBackPro 10.2.93.0 Beta (Feb 28, 2023)
- Fixed (Pro): When using shared settings the refresh token may not be updated while multiple profiles using same cloud are being run
- Fixed (Pro): Unable to select Ransomware file when using Google Drive
- Fixed (Pro): Was trying to delete legacy folders from Azure
- Fixed: Rollback pop-up menu in Restore Wizard was not initialized unless History tab was displayed
- New: Will use SYNCBACKTEMP environment variable as directory for all temporary files if it exists
New in SyncBackPro 10.2.92.0 Beta (Feb 24, 2023)
- Fixed (Pro): When using shared settings the refresh token may not be updated while multiple profiles using same cloud are being run
- Fixed (Pro): Unable to select Ransomware file when using Google Drive
- Fixed: Rollback pop-up menu in Restore Wizard was not initialized unless History tab was displayed
- New: Will use SYNCBACKTEMP environment variable as directory for all temporary files if it exists
New in SyncBackPro 10.2.91.0 Beta (Feb 10, 2023)
- Fixed (Pro): Unable to select Ransomware file when using Google Drive
- New: Will use SYNCBACKTEMP environment variable as directory for all temporary files if it exists
New in SyncBackPro 10.2.90.0 Beta (Feb 2, 2023)
- Fixed (Pro): When using shared settings the refresh token may not be updated while multiple profiles using same cloud are being run
- Fixed: Rollback pop-up menu in Restore Wizard was not initialized unless History tab was displayed
New in SyncBackPro 10.2.89.0 Beta (Jan 4, 2023)
- Fixed (Pro): When using shared settings the refresh token may not be updated while multiple profiles using same cloud are being run
New in SyncBackPro 10.2.88.0 (Jan 4, 2023)
- New: Can press F5 to refresh Differences window
- New: Double-click can now run or queue a profile unattended
- Updated (Pro/SE): Quick settings option in Log settings for a profile
- Updated (Pro/SE): Can use the "Do not store password" option when creating scheduled tasks on Windows 10
- Updated (Pro/SE): Mouse cursor changes when hovering over versions icon in Differences window
- Updated (Pro/SE): Non-elevated version of SyncBack also installed
- Updated: Option to forcibly disconnect network connections
- Updated (Pro): hubiC cloud service has been discontinued
- Updated: Italian translations and tweaks to interface for Italian
- Updated: Can select directory when using volume GUID and not drive letter
- Updated (Pro/SE): Ransomware protection filename for profile is changed to use drive serial instead of letter
- Fixed (Pro): You cannot use archival fast backup when using cloud
- Fixed (Pro/SE): FTP concurrent downloads
- Fixed: The uninstaller displayed access violation error if uninstalling and never ran SyncBack
- Fixed: Hash values for files over 4GB may be incorrect
- Fixed (Pro/SE): Webhook and Pushover failure notification messages will now be sent for critical failures
- Fixed (Pro): For pCloud, the option to delete all files and folders did not delete sub-folders
- Fixed: Parallel compression may not work when run from schedule
- Fixed: When compressing to a single file the NTFS security is taken from the temp directory
New in SyncBackPro 10.2.87.0 Beta (Jan 3, 2023)
- New: Can press F5 to refresh Differences window
- New: Double-click can now run or queue a profile unattended
- Updated (Pro/SE): Quick settings option in Log settings for a profile
- Updated (Pro/SE): Can use the "Do not store password" option when creating scheduled tasks on Windows 10
- Updated (Pro/SE): Mouse cursor changes when hovering over versions icon in Differences window
- Updated (Pro/SE): Non-elevated version of SyncBack also installed
- Updated: Option to forcibly disconnect network connections
- Updated (Pro): hubiC cloud service has been discontinued
- Updated: Italian translations and tweaks to interface for Italian
- Updated: Can select directory when using volume GUID and not drive letter
- Updated (Pro/SE): Ransomware protection filename for profile is changed to use drive serial instead of letter
- Fixed (Pro): You cannot use archival fast backup when using cloud
- Fixed (Pro/SE): FTP concurrent downloads
- Fixed: The uninstaller displayed access violation error if uninstalling and never ran SyncBack
- Fixed: Hash values for files over 4GB may be incorrect
- Fixed (Pro/SE): Webhook and Pushover failure notification messages will now be sent for critical failures
- Fixed (Pro): For pCloud, the option to delete all files and folders did not delete sub-folders
- Fixed: Parallel compression may not work when run from schedule
- Fixed: When compressing to a single file the NTFS security is taken from the temp directory
New in SyncBackPro 10.2.86.0 Beta (Dec 23, 2022)
- Fixed: Parallel compression may not work when run from schedule
New in SyncBackPro 10.2.85.0 Beta (Dec 22, 2022)
- New: Can press F5 to refresh Differences window
- New: Double-click can now run or queue a profile unattended
- Updated (Pro/SE): Quick settings option in Log settings for a profile
- Updated (Pro/SE): Can use the "Do not store password" option when creating scheduled tasks on Windows 10
- Updated (Pro/SE): Mouse cursor changes when hovering over versions icon in Differences window
- Updated (Pro/SE): Non-elevated version of SyncBack also installed
- Updated: Option to forcibly disconnect network connections
- Updated (Pro): hubiC cloud service has been discontinued
- Updated: Italian translations and tweaks to interface for Italian
- Updated: Can select directory when using volume GUID and not drive letter
- Updated (Pro/SE): Ransomware protection filename for profile is changed to use drive serial instead of letter
- Fixed (Pro): You cannot use archival fast backup when using cloud
- Fixed (Pro/SE): FTP concurrent downloads
- Fixed: The uninstaller displayed access violation error if uninstalling and never ran SyncBack
- Fixed: Hash values for files over 4GB may be incorrect
- Fixed (Pro/SE): Webhook and Pushover failure notification messages will now be sent for critical failures
- Fixed (Pro): For pCloud, the option to delete all files and folders did not delete sub-folders
New in SyncBackPro 10.2.83.0 Beta (Dec 5, 2022)
- New: Can press F5 to refresh Differences window
- New: Double-click can now run or queue a profile unattended
- Updated (Pro/SE): Quick settings option in Log settings for a profile
- Updated (Pro/SE): Can use the "Do not store password" option when creating scheduled tasks on Windows 10
- Updated (Pro/SE): Mouse cursor changes when hovering over versions icon in Differences window
- Updated (Pro/SE): Non-elevated version of SyncBack also installed
- Updated: Option to forcibly disconnect network connections
- Updated (Pro): hubiC cloud service has been discontinued
- Fixed (Pro): You cannot use archival fast backup when using cloud
- Fixed (Pro/SE): FTP concurrent downloads
- Fixed: The uninstaller displayed access violation error if uninstalling and never ran SyncBack
- Fixed: Hash values for files over 4GB may be incorrect
- Fixed (Pro/SE): Webhook and Pushover failure notification messages will now be sent for critical failures
- Fixed (Pro): For pCloud, the option to delete all files and folders did not delete sub-folders
New in SyncBackPro 10.2.82.0 Beta (Dec 1, 2022)
- New: Can press F5 to refresh Differences window
- New: Double-click can now run or queue a profile unattended
- Updated (Pro/SE): Quick settings option in Log settings for a profile
- Updated (Pro/SE): Can use the "Do not store password" option when creating scheduled tasks on Windows 10
- Updated (Pro/SE): Mouse cursor changes when hovering over versions icon in Differences window
- Updated (Pro/SE): Non-elevated version of SyncBack also installed
- Updated: Option to forcibly disconnect network connections
- Updated (Pro): hubiC cloud service has been discontinued
- Fixed (Pro): You cannot use archival fast backup when using cloud
- Fixed (Pro/SE): FTP concurrent downloads
- Fixed: The uninstaller displayed access violation error if uninstalling and never ran SyncBack
- Fixed: Hash values for files over 4GB may be incorrect
- Fixed (Pro/SE): Webhook and Pushover failure notification messages will now be sent for critical failures
New in SyncBackPro 10.2.79.0 Beta (Nov 25, 2022)
- New: Can press F5 to refresh Differences window
- Fixed (Pro/SE): FTP concurrent downloads
New in SyncBackPro 10.2.78.0 Beta (Nov 24, 2022)
- New: Can press F5 to refresh Differences window
New in SyncBackPro 10.2.73.0 Beta (Nov 4, 2022)
- Updated (Pro/SE): Quick settings option in Log settings for a profile
- Updated (Pro/SE): Can use the "Do not store password" option when creating scheduled tasks on Windows 10
- Fixed (Pro): You cannot use archival fast backup when using cloud
- Fixed: The uninstaller displayed access violation error if uninstalling and never ran SyncBack
- Fixed: Hash values for files over 4GB may be incorrect
New in SyncBackPro 10.2.71.0 Beta (Oct 14, 2022)
- Updated (Pro/SE): Quick settings option in Log settings for a profile
- Updated (Pro/SE): Can use the "Do not store password" option when creating scheduled tasks on Windows 10
- Fixed (Pro): You cannot use archival fast backup when using cloud
New in SyncBackPro 10.2.68.0 (Oct 10, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
- Fixed: EWS send mail failed with 32-bit SyncBack
- Fixed (Pro): TStringlist constructor in scripting, help file also updated
- Fixed (Pro): Plus character (+) in folder/file name could cause problems with Google Drive
- Fixed (Pro): Some script functions were returning source file size instead of destination
- Fixed (Pro): RunRunBeforeBefore, RunRunAfterBefore script functions not called
- Fixed (Pro): S3 compatibility fix
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
- Updated: Merged the Compression and Compression->Encryption profile settings pages
- Updated: If there are no profiles then the New profile button will flash
- Updated: Compiled using latest release of Delphi
- Updated (Pro): New script function SBSystem.ShowMessage
- Updated (Pro): Running script section updated to show order of calls to script
- Updated: The Action selection is now a pop-up menu on the Differences window
- Updated: The New Files and New Folders selection is now a pop-up menu on the File and Folder selection window
- Updated (Pro/SE): The FTP keep alive option now works with Chilkat FTP engine, but implemented in a different way
- Updated (Pro/SE): Can specify active FTP port range with Chilkat FTP engine
- Updated (Pro/SE): Chilkat FTP can now forcibly use LIST instead of MLST
- New: Reset buttons on Compare Options->Date Time
- New: In the Restore wizard you can double-click on a History row to use that date and time for rollback
New in SyncBackPro 10.2.67.0 Beta (Oct 10, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
- Fixed: EWS send mail failed with 32-bit SyncBack
- Fixed (Pro): TStringlist constructor in scripting, help file also updated
- Fixed (Pro): Plus character (+) in folder/file name could cause problems with Google Drive
- Fixed (Pro): Some script functions were returning source file size instead of destination
- Fixed (Pro): RunRunBeforeBefore, RunRunAfterBefore script functions not called
- Fixed (Pro): S3 compatibility fix
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
- Updated: Merged the Compression and Compression->Encryption profile settings pages
- Updated: If there are no profiles then the New profile button will flash
- Updated: Compiled using latest release of Delphi
- Updated (Pro): New script function SBSystem.ShowMessage
- Updated (Pro): Running script section updated to show order of calls to script
- Updated: The Action selection is now a pop-up menu on the Differences window
- Updated: The New Files and New Folders selection is now a pop-up menu on the File and Folder selection window
- Updated (Pro/SE): The FTP keep alive option now works with Chilkat FTP engine, but implemented in a different way
- Updated (Pro/SE): Can specify active FTP port range with Chilkat FTP engine
- Updated (Pro/SE): Chilkat FTP can now forcibly use LIST instead of MLST
- New: Reset buttons on Compare Options->Date Time
- New: In the Restore wizard you can double-click on a History row to use that date and time for rollback
New in SyncBackPro 10.2.65.0 Beta (Oct 6, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
- Fixed: EWS send mail failed with 32-bit SyncBack
- Fixed (Pro): TStringlist constructor in scripting, help file also updated
- Fixed (Pro): Plus character (+) in folder/file name could cause problems with Google Drive
- Fixed (Pro): Some script functions were returning source file size instead of destination
- Fixed (Pro): RunRunBeforeBefore, RunRunAfterBefore script functions not called
- Fixed (Pro): S3 compatibility fix
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
- Updated: Merged the Compression and Compression->Encryption profile settings pages
- Updated: If there are no profiles then the New profile button will flash
- Updated: Compiled using latest release of Delphi
- Updated (Pro): New script function SBSystem.ShowMessage
- Updated (Pro): Running script section updated to show order of calls to script
- Updated: The Action selection is now a pop-up menu on the Differences window
- Updated: The New Files and New Folders selection is now a pop-up menu on the File and Folder selection window
- New: Reset buttons on Compare Options->Date Time
- New: In the Restore wizard you can double-click on a History row to use that date and time for rollback
New in SyncBackPro 10.2.64.0 Beta (Oct 5, 2022)
- Updated: The Action selection is now a pop-up menu on the Differences window
- Updated: The New Files and New Folders selection is now a pop-up menu on the File and Folder selection window
New in SyncBackPro 10.2.63.0 Beta (Oct 5, 2022)
- Fixed (Pro): S3 compatibility fix
New in SyncBackPro 10.2.62.0 Beta (Sep 21, 2022)
- Fixed (Pro): Plus character (+) in folder/file name could cause problems with Google Drive
- Fixed (Pro): Some script functions were returning source file size instead of destination
- Fixed (Pro): Some script functions were returning source file size instead of destination
- Fixed (Pro): RunRunBeforeBefore, RunRunAfterBefore script functions not called
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
- Updated: Merged the Compression and Compression->Encryption profile settings pages
- Updated: If there are no profiles a hint appears above the New profile button
- Updated: Compiled using latest release of Delphi
- Updated (Pro): New script function SBSystem.ShowMessage
- Updated (Pro): Running script section updated to show order of calls to script
- New: Reset buttons on Compare Options->Date Time
- New: In the Restore wizard you can double-click on a History row to use that date and time for rollback
New in SyncBackPro 10.2.61.0 Beta (Sep 19, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
- Fixed: EWS send mail failed with 32-bit SyncBack
- Fixed (Pro): TStringlist constructor in scripting, help file also updated
New in SyncBackPro 10.2.60.0 Beta (Sep 15, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
- Fixed: EWS send mail failed with 32-bit SyncBack
- Fixed (Pro): TStringlist constructor in scripting, help file also updated
- Fixed (Pro): Plus character (+) in folder/file name could cause problems with Google Drive
- Fixed (Pro): Some script functions were returning source file size instead of destination
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
- Updated: Merged the Compression and Compression->Encryption profile settings pages
- Updated: If there are no profiles a hint appears above the New profile button
- Updated: Compiled using latest release of Delphi
- Updated (Pro): New script function SBSystem.ShowMessage
New in SyncBackPro 10.2.59.0 Beta (Sep 14, 2022)
- Fixed (Pro): Plus character (+) in folder/file name could cause problems with Google Drive
New in SyncBackPro 10.2.58.0 Beta (Sep 12, 2022)
- Updated: New script function SBSystem.ShowMessage
New in SyncBackPro 10.2.57.0 Beta (Sep 9, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
- Fixed: EWS send mail failed with 32-bit SyncBack
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
- Updated: Merged the Compression and Compression->Encryption profile settings pages
- Updated: If there are no profiles a hint appears above the New profile button
- Updated: Compiled using latest release of Delphi
New in SyncBackPro 10.2.56.0 Beta (Aug 27, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
- Fixed: EWS send mail failed with 32-bit SyncBack
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
New in SyncBackPro 10.2.55.0 Beta (Aug 26, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
- Fixed: EWS send mail failed with 32-bit SyncBack
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
New in SyncBackPro 10.2.52.0 Beta (Aug 20, 2022)
- Fixed (Pro/SE): With Touch, junction points were always ignored
- Fixed (Pro/SE): With Touch, recursive/repeated junction points were not detected
New in SyncBackPro 10.2.51.0 Beta (Aug 17, 2022)
- Updated (Pro/SE): Installation not allowed on Windows Server Core installations
New in SyncBackPro 10.2.48.0 Beta (Aug 12, 2022)
- Fixed: Handling of Alt key and shortcuts in main and Differences window
- Fixed: Decryption profile settings page did not allow revert or copy from another profile
- Fixed: The filter hit count in the log for folders may be twice the expected result
- Updated (Pro): Added support for new AWS S3 Hong Kong region
- Updated (Pro): Improved support for IBM Object Storage (supports Tags)
New in SyncBackPro 10.2.47.0 Beta (Aug 11, 2022)
- Fixed: Will not use default new profile location, e.g. cloud, when creating new profile and cloud not used in wizard, for example
- Fixed: If Errors tab is displayed, and profile prompts with error message at end, then could not click OK
- Updated (Pro): Changes to properly support Contabo S3 Compatible Object storage
New in SyncBackPro 10.2.45.0 Beta (Jul 15, 2022)
- Fixed: Handling of Alt key and shortcuts in main and Differences window
- Fixed: Decryption profile settings page did not allow revert or copy from another profile
- Fixed: The filter hit count in the log for folders may be twice the expected result
- Updated (Pro): Added support for new AWS S3 Hong Kong region
- Updated (Pro): Improved support for IBM Object Storage (supports Tags)
New in SyncBackPro 10.2.43.0 Beta (Jul 14, 2022)
- Fixed: Handling of Alt key and shortcuts in main and Differences window
- Fixed: Decryption profile settings page did not allow revert or copy from another profile
- Fixed: The filter hit count in the log for folders may be twice the expected result
- Updated (Pro): Added support for new AWS S3 Hong Kong region
- Updated (Pro): Improved support for IBM Object Storage (supports Tags)
New in SyncBackPro 10.2.42.0 Beta (Jul 8, 2022)
- Fixed: Handling of Alt key and shortcuts in main and Differences window
- Fixed: Decryption profile settings page did not allow revert or copy from another profile
- Fixed: The filter hit count in the log for folders may be twice the expected result
- Updated (Pro): Added support for new AWS S3 Hong Kong region
- Updated (Pro): Improved support for IBM Object Storage (supports Tags)
New in SyncBackPro 10.2.41.0 Beta (Jul 6, 2022)
- Updated (Pro): Added support for new AWS S3 Hong Kong region
New in SyncBackPro 10.2.40.0 Beta (Jul 4, 2022)
- Fixed: Handling of Alt key and shortcuts in main and Differences window
New in SyncBackPro 10.2.39.0 (Jun 29, 2022)
- Updated (Pro): Authentication method changed for Google Drive and Google Photos (new method required by Google)
- Updated (Pro): RunRunAfterBefore script call can now abort the profile
- Updated: More likely to be able to suggest a UNC path for a drive letter
- Updated: Partial folder selection icon in File and Folder selection window tweaked to make more obvious
- Updated (Pro/SE): When encrypting filenames in Zip files it is now clearer that you cannot use no compression and must use Deflate or BZip2
- Fixed: Creating new shared settings may not save shared settings
- Fixed: Double-clicking on a folder in the file and folder selection window was not expanding or contracting
- Fixed (Pro): Compressed files were re-uploaded after a Force Rescan with Google Drive and Dropbox
- Fixed: When using DevArt and UTF8 then it may retrieve filename not using UTF8 if MLST is used
- Fixed: When using multi-zip a change in a folders date and time were not copied across
- Fixed (Pro): Renew BackBlaze AUTH token before it expires
- Fixed: Cleaned entries no longer reappear in file and folder selection window when refreshing
- Fixed: In Group profile config window profiles that were in the group were not shown when filter changed
- Fixed: On When->Periodically can now set an only run between times that straddles midnight
- Fixed (Pro): Sharefile: correctly encode filenames containing special characters during uploads
New in SyncBackPro 10.2.37.0 Beta (Jun 20, 2022)
- Updated (Pro/SE): When encrypting filenames in Zip files it is now clearer that you cannot use no compression and must use Deflate or BZip2
- Fixed (Pro): Sharefile: correctly encode filenames containing special characters during uploads
New in SyncBackPro 10.2.36.0 Beta (Jun 14, 2022)
- Updated: Partial folder selection icon in File and Folder selection window tweaked to make more obvious
- Fixed: In Group profile config window profiles that were in the group were not shown when filter changed
New in SyncBackPro 10.2.35.0 Beta (Jun 8, 2022)
- Updated (Pro): Authentication method changed for Google Drive and Google Photos (new method required by Google)
- Updated (Pro): RunRunAfterBefore script call can now abort the profile
- Updated: More likely to be able to suggest a UNC path for a drive letter
- Fixed: Creating new shared settings may not save shared settings
- Fixed: Double-clicking on a folder in the file and folder selection window was not expanding or contracting
- Fixed (Pro): Compressed files were re-uploaded after a Force Rescan with Google Drive and Dropbox
- Fixed: When using DevArt and UTF8 then it may retrieve filename not using UTF8 if MLST is used
- Fixed: When using multi-zip a change in a folders date and time were not copied across
- Fixed (Pro): Renew BackBlaze AUTH token before it expires
- Fixed: Cleaned entries no longer reappear in file and folder selection window when refreshing
New in SyncBackPro 10.2.34.0 Beta (Jun 7, 2022)
- Fixed (Pro): Renew BackBlaze AUTH token before it expires
New in SyncBackPro 10.2.33.0 Beta (Jun 6, 2022)
- Updated (Pro): Authentication method changed for Google Drive and Google Photos (new method required by Google)
- Updated (Pro): RunRunAfterBefore script call can now abort the profile
- Fixed: Creating new shared settings may not save shared settings
- Fixed: Double-clicking on a folder in the file and folder selection window was not expanding or contracting
- Fixed (Pro): Compressed files were re-uploaded after a Force Rescan with Google Drive and Dropbox
- Fixed: When using DevArt and UTF8 then it may retrieve filename not using UTF8 if MLST is used
- Fixed: When using multi-zip a change in a folders date and time were not copied across
New in SyncBackPro 10.2.32.0 Beta (Jun 3, 2022)
- Fixed: Double-clicking on a folder in the file and folder selection window was not expanding or contracting
- Fixed (Pro): Compressed files were re-uploaded after a Force Rescan with Google Drive and Dropbox
New in SyncBackPro 10.2.31.0 Beta (May 18, 2022)
- Updated (Pro): RunRunAfterBefore script call can now abort the profile
- Fixed: Creating new shared settings may not save shared settings
New in SyncBackPro 10.2.30.0 Beta (May 12, 2022)
- Authentication method changed for Google Drive and Google Photos (new method required by Google).
New in SyncBackPro 10.2.29.0 Beta (May 11, 2022)
- Updated (Pro): Authentication method changed for Google Drive and Google Photos (new method required by Google)
New in SyncBackPro 10.2.28.0 (May 4, 2022)
- Updated: Full main window refresh when SyncBack becomes active window
- Updated: Compiled using latest version of Delphi (11.1)
- Updated: Auto-close will not try to close child windows (will only do that now if "Forcibly close" is enabled)
- Fixed: Option to not copy NTFS offline files was being ignored
- Fixed: Changes to Differences window to resolve small DPI issues
- Fixed (Pro/SE): Under extremely high memory use there may be issues with 64-bit version
- Fixed (Pro): May fail to get file details from cloud (if not uploaded using SyncBackPro)
- Fixed (Pro): With cloud storage system that have virtual folders then may not see folders that contain no files
- Fixed: With threaded FTP uploads, and no safe copy, files in profile base folder may upload to FTP root folder
- Fixed: Do not treat reply 451 as an error when using Chilkat FTP
- Fixed: Crash when Windows set to forcibly use Bottom-Up ASLR
New in SyncBackPro 10.2.27.0 Beta (Apr 28, 2022)
- Updated: Auto-close will not try to close child windows (will only do that now if "Forcibly close" is enabled)
- Fixed: Crash when Windows set to forcibly use Bottom-Up ASLR
New in SyncBackPro 9.5.87.0 Beta (Apr 27, 2022)
- Updated: Compiled using newer version of Delphi (11.1)
- Fixed (Pro/SE): Under extremely high memory use there may be issues with 64-bit version
- Fixed (Pro): May fail to get file details from cloud (if not uploaded using SyncBackPro)
- Fixed (Pro): With cloud storage system that have virtual folders then may not see folders that contain no files
- Fixed: With threaded FTP uploads, and no safe copy, files in profile base folder may upload to FTP root folder
New in SyncBackPro 10.2.26.0 Beta (Apr 27, 2022)
- Updated: Full main window refresh when SyncBack becomes active window
- Updated: Compiled using newer version of Delphi (11.1)
- Fixed: Option to not copy NTFS offline files was being ignored
- Fixed: Changes to Differences window to resolve small DPI issues
- Fixed (Pro/SE): Under extremely high memory use there may be issues with 64-bit version
- Fixed (Pro): May fail to get file details from cloud (if not uploaded using SyncBackPro)
- Fixed (Pro): With cloud storage system that have virtual folders then may not see folders that contain no files
- Fixed: With threaded FTP uploads, and no safe copy, files in profile base folder may upload to FTP root folder
- Fixed: Do not treat reply 451 as an error when using Chilkat FTP
New in SyncBackPro 10.2.23.0 Beta (Apr 23, 2022)
- Updated: Full main window refresh when SyncBack becomes active window
- Updated: Compiled using newer version of Delphi (11.1)
- Fixed: Option to not copy NTFS offline files was being ignored
- Fixed: Changes to Differences window to resolve small DPI issues
- Fixed (Pro/SE): Under extremely high memory use there may be issues with 64-bit version
- Fixed (Pro): May fail to get file details from cloud (if not uploaded using SyncBackPro)
- Fixed (Pro): With cloud storage system that have virtual folders then may not see folders that contain no files
New in SyncBackPro 10.2.22.0 Beta (Apr 12, 2022)
- Fixed: With threaded FTP uploads, and no safe copy, files in profile base folder may upload to FTP root folder
New in SyncBackPro 9.5.86.0 Beta (Apr 12, 2022)
- Fixed (Pro/SE): Under extremely high memory use there may be issues with 64-bit version
- Fixed (Pro): May fail to get file details from cloud (if not uploaded using SyncBackPro)
- Fixed (Pro): With cloud storage system that have virtual folders then may not see folders that contain no files
- Fixed: With threaded FTP uploads, and no safe copy, files in profile base folder may upload to FTP root folder
New in SyncBackPro 10.2.21.0 Beta (Apr 8, 2022)
- Updated: Full main window refresh when SyncBack becomes active window
- Updated: Compiled using newer version of Delphi (11.1)
- Fixed: Option to not copy NTFS offline files was being ignored
- Fixed: Changes to Differences window to resolve small DPI issues
- Fixed: Under extremely high memory use there may be issues with 64-bit version
- Fixed: May fail to get file details from cloud (if not uploaded using SyncBackPro)
- Fixed: With cloud storage system that have virtual folders then may not see folders that contain no files
New in SyncBackPro 10.2.20.0 Beta (Apr 5, 2022)
- Fixed: May fail to get file details from cloud (if not uploaded using SyncBackPro)
- Fixed: With cloud storage system that have virtual folders then may not see folders that contain no files
New in SyncBackPro 9.5.85.0 Beta (Apr 5, 2022)
- Updated: Compiled using newer version of Delphi (11.1)
- Fixed: Under extremely high memory use there may be issues with 64-bit version
- Fixed: May fail to get file details from cloud (if not uploaded using SyncBackPro)
- Fixed: With cloud storage system that have virtual folders then may not see folders that contain no files
New in SyncBackPro 9.5.84.0 Beta (Apr 4, 2022)
- Fixed: Under extremely high memory use there may be issues with 64-bit version
New in SyncBackPro 10.2.19.0 Beta (Apr 4, 2022)
- Updated: Full main window refresh when SyncBack becomes active window
- Updated: Compiled using newer version of Delphi (11.1)
- Fixed: Option to not copy NTFS offline files was being ignored
- Fixed: Changes to Differences window to resolve small DPI issues
- Fixed: Under extremely high memory use there may be issues with 64-bit version
New in SyncBackPro 9.5.83.0 (Mar 23, 2022)
- Updated: Small UI tweaks and fixes
- Updated: Various 3rd party components updated
- Updated: Compiled using newer version of Delphi (11.1)
New in SyncBackPro 10.2.18.0 Beta (Mar 22, 2022)
- Updated: Full main window refresh when SyncBack becomes active window
- Fixed: Option to not copy NTFS offline files was being ignored
New in SyncBackPro 10.2.17.0 Beta (Mar 18, 2022)
- Updated: Full main window refresh when SyncBack becomes active window
- Fixed: Option to not copy NTFS offline files was being ignored
New in SyncBackPro 10.2.16.0 Beta (Mar 15, 2022)
- Updated: Full main window refresh when SyncBack becomes active window
- Fixed: Option to not copy NTFS offline files was being ignored
New in SyncBackPro 10.2.15.0 Beta (Mar 11, 2022)
- Updated: Full main window refresh when SyncBack is activate application
New in SyncBackPro 10.2.14.0 (Mar 11, 2022)
- New: Option in profile list header pop-up menu in main window to factory reset column positions, widths and visibility
- New: Option in profile list header pop-up menu in main window to auto-size column widths
- New (Pro): Pascal script to only run a profile if a specific file exists
- Updated: Hint shown in Settings page of Global Settings for number of profiles found in each folder
- Updated: Numerous tweaks and minor fixes in user interface
- Updated: Can double-click on items in Compression->Compressed to change them
- Fixed (Pro): Exception in New Profile Wizard and Profile Configuration if using Backblaze B2 and exceeded caps
- Fixed: Email was not sent if profile aborted and using compressed log
- Fixed: Fix issues with maximized windows when non-standard DPI
- Fixed (Pro): Filenames with special characters would be re-uploaded to PCloud on every run if versioning enabled
New in SyncBackPro 10.2.14.0 Beta (Mar 9, 2022)
- New: Option in profile list header pop-up menu in main window to factory reset column positions, widths and visibility
- New: Option in profile list header pop-up menu in main window to auto-size column widths
- New (Pro): Pascal script to only run a profile if a specific file exists
- Updated: Hint shown in Settings page of Global Settings for number of profiles found in each folder
- Updated: Numerous tweaks and minor fixes in user interface
- Updated: Can double-click on items in Compression->Compressed to change them
- Fixed (Pro): Exception in New Profile Wizard and Profile Configuration if using Backblaze B2 and exceeded caps
- Fixed: Email was not sent if profile aborted and using compressed log
- Fixed: Fix issues with maximized windows when non-standard DPI
- Fixed (Pro): Filenames with special characters would be re-uploaded to PCloud on every run if versioning enabled
New in SyncBackPro 10.2.13.0 Beta (Mar 4, 2022)
- Updated: Numerous tweaks in user interface
New in SyncBackPro 9.5.80.0 Beta (Mar 2, 2022)
- Updated: Small UI tweaks and fixes
- Updated: Various 3rd party components updated
New in SyncBackPro 10.2.12.0 Beta (Feb 25, 2022)
- Updated: Can double-click on items in Compression->Compressed to change them
New in SyncBackPro 10.2.10.0 Beta (Feb 21, 2022)
- Fixed (Pro): Filenames with special characters would be re-uploaded to PCloud on every run if versioning enabled
New in SyncBackPro 10.2.9.0 Beta (Feb 18, 2022)
- Updated: Tweaks in user interface (especially around burger menu) to have consistent UI
New in SyncBackPro 10.2.8.0 Beta (Feb 15, 2022)
- Fixed (Pro): Very rare stack overflow
- Fixed (Pro): Exception in New Profile Wizard and Profile Configuration if using Backblaze B2 and exceeded caps
- Fixed: Email was not sent if profile aborted and using compressed log
- Fixed: Fix issues with maximized windows when non-standard DPI
New in SyncBackPro 10.2.7.0 Beta (Feb 15, 2022)
- Updated: Hint shown in Settings page of Global Settings for number of profiles found in each folder
- New: Option in profile list header pop-up menu in main window to factory reset column positions, widths and visibility
- New: Option in profile list header pop-up menu in main window to auto-size column widths
- New (Pro): Pascal script to only run a profile if a specific file exists
New in SyncBackPro 10.2.6.0 Beta (Feb 8, 2022)
- Fixed (Pro): Exception in New Profile Wizard and Profile Configuration if using Backblaze B2 and exceeded caps
- Fixed: Email was not sent if profile aborted and using compressed log
New in SyncBackPro 10.2.5.0 Beta (Feb 7, 2022)
- Very rare stack overflow.
New in SyncBackPro 10.2.4.0 (Feb 3, 2022)
- New (Pro): Support for Glacier Instant Retrieval storage class in Amazon S3
- New (SE/Pro): Auto-incrementing variables for profiles
- New (SE/Pro): -donotshowlog command line parameter
- Updated (SE/Pro): Alternative paths (in Profile Configuration) available when using Touch
- Updated (Pro): Default storage class for S3 changed to Standard from RRS
- Updated (Pro): Change to stop retrying if getting error 401 for reasons other than invalid tokens/credentials (Backblaze)
- Updated: The HTML log now shows the profile actual start time and total time when part of a group
- Updated (Pro): Better support for iDrive Cloud S3 compatibility
- Updated (Pro): Better key exchange support with Chilkat SFTP (Diffie-Hellman)
- Updated (Pro): When creating or changing a WebDAV profile you are prompted if you want SyncBackPro to test it for compatibility
- Updated: Mouse-wheel scrolling in bottom panel of Differences window
- Updated (Pro): Recognizes integrity check scheduled tasks
- Fixed: When copying an unencrypted (NTFS) file to an NTFS folder using encryption then the copy was decrypted
- Fixed: Error message when drive missing and using SERIAL or LABEL variables
- Fixed: Correctly use custom LIST command with WOD FTP
- Fixed (Pro): File and folder selections with Google Photos
- Fixed (Pro): Change in S3 compatibility mode when using B2, to not set the object's ACL property when uploading files
New in SyncBackPro 10.2.3.0 Beta (Jan 31, 2022)
- Updated: Mouse-wheel scrolling in bottom panel of Differences window
New in SyncBackPro 10.2.2.0 Beta (Jan 27, 2022)
- Updated (Pro): When creating or changing a WebDAV profile you are prompted if you want SyncBackPro to test it for compatibility
New in SyncBackPro 9.5.78.0 Beta (Jan 21, 2022)
- Updated (Pro): Dropbox requires TLS 1.2
New in SyncBackPro 10.2.1.0 Beta (Jan 21, 2022)
- Updated (Pro): Better key exchange support with Chilkat SFTP (Diffie-Hellman)
New in SyncBackPro 10.2.0.0 Beta (Jan 19, 2022)
- New (Pro): Support for Glacier Instant Retrieval storage class in Amazon S3
- New (SE/Pro): Auto-incrementing variables for profiles
- New (SE/Pro): -donotshowlog command line parameter
- Updated (SE/Pro): Alternative paths (in Profile Configuration) available when using Touch
- Updated (Pro): Default storage class for S3 changed to Standard from RRS
- Updated: The HTML log now shows the profile actual start time and total time when part of a group
- Updated (Pro): Better support for iDrive Cloud S3 compatibility
- Fixed: When copying an unencrypted (NTFS) file to an NTFS folder using encryption then the copy was decrypted
- Fixed: Error message when drive missing and using SERIAL or LABEL variables
- Fixed: Correctly use custom LIST command with WOD FTP
- Fixed (Pro): File and folder selections with Google Photos
- Fixed (Pro): Change in S3 compatibility mode when using B2, to not set the object's ACL property when uploading files
New in SyncBackPro 10.1.30.0 Beta (Jan 11, 2022)
- Updated (Pro): Change to stop retrying if getting error 401 for reasons other than invalid tokens/credentials (Backblaze)
New in SyncBackPro 10.1.28.0 Beta (Dec 30, 2021)
- New (Pro): Support for Glacier Instant Retrieval storage class in Amazon S3
- Fixed: When copying an unencrypted (NTFS) file to an NTFS folder using encryption then the copy was decrypted
- Fixed (Pro): File and folder selections with Google Photos
New in SyncBackPro 10.1.25.0 Beta (Dec 22, 2021)
- Fixed: When copying an unencrypted (NTFS) file to an NTFS folder using encryption then the copy was decrypted
New in SyncBackPro 9.5.76.0 (Dec 14, 2021)
- Fixed: Include new files pop-up menu items in File & Folder Selection window were incorrect
- Fixed: Password edit boxes color wrong when editing in a dark style
- Fixed: Improved FTP/SFTP server disconnection detection when using WoD
- Fixed (SE/Pro): File and Folder selections not working with Touch when using variables
- Fixed (Pro): Google Drive HTTP 500 error when reading root folder content
- Fixed: Crash when scanning a folder that has junction points to drives not mounted via drive letters
New in SyncBackPro 10.1.24.0 (Dec 14, 2021)
- Critical/Security: Updated the Apache Log4j 2 library to version 2.15 to avoid the Log4Shell exploit. For more info see: CVE-2021-44228.
- OpenJDK JRE: Upgraded bundled OpenJDK JRE to 17.0.1.
- macOS Apple Silicon: Updated OpenJFX from bundled OpenJDK JRE to a newer version that avoids a consistent application crash on macOS 12. (JDK-8275723)
- macOS/Java 17/Keyboard Shortcuts: Fixed an issue where the Alt-Arrows and the Alt-Shift-Arrows shortcuts did not work in the Text/Author editing modes when the Alt/Option key from the right side of the keyboard was used.
- macOS: Fixed an issue where the focus was not properly moved inside Cancel/No/Yes dialog boxes when the Yes button was selected and the Tab key was pressed.
- Eclipse plugin/Schematron Validation: Fixed an issue where validation against a Schematron file did not work for some configurations.
- Validation: Fixed an issue where the default Validate action on the main toolbar was not properly activated for new editors when the "Load file content only when switching to its corresponding editor tab" option was active (another active validation action was run instead).
- Java 17/Keyboard Shortcuts: Fixed an issue where keyboard shortcuts using the "Alt Graph" key (the "Alt" key found on the right side of a keyboard) could no longer be defined.
- Author Component: The component no longer displays an extra error dialog box when initialized with no server details or license key.
- Author/Paste: Fixed a bug where an image was lost when pasting a larger fragment from a word document.
- XSLT: Fixed an issue where an ArrayIndexOutOfBoundsException error was reported when trying to show the tooltip with the function signature for a single-argument function.
- Windows/DITA-OT Publishing: Fixed an issue where a DITA topic published to PDF using CSS without having an open root map did not add all the verbose messages to the DITA-OT console tab presented when the transformation fails with errors or when verbose console output was enabled explicitly.
- JSON Schema/Design: The paste action for the allOf, oneOf, and anyOf components was restricted to avoid duplications.
- JSON Schema/Design mode: Fixed an issue that happened when either the "Move up" or "Move down" action was performed on any of the allOf, oneOf, anyOf, or items nodes.
- eXist-db: Fixed an issue where XML documents opened from an eXist-db database were sometimes truncated.
- JSON Editor: Fixed an issue where the syntax highlighting and the format and indent mechanisms did not work properly if a string value ended with an escaped '' (backslash) character.
- macOS/Content Completion: Fixed an issue where the content completion window was no longer triggered when Ctrl-Space or Ctrl-Shift-Space keyboard shortcuts were used and Oxygen was running with Java 17.
- DITA-OT Plugins/Dynamic Resources Converter: Fixed an issue where the dynamic conversion of Word documents failed when the path of the input file contained more "." characters other than the file extension separator.
- Editors: Fixed an ArrayIndexOutOfBoundsException error generated by improper threads synchronization when editors were opened or closed.
- SharePoint Browser/SharePoint Online connection: Fixed an issue that caused the SharePoint Browser to no longer present any files if a large document (over 2 GB) was detected on the SharePoint server.
- Oxygen PDF Chemistry: Fixed an IllegalStateException error that was presented when a PDF containing changes and comments was generated and also had security permissions set.
- Oxygen PDF Chemistry: Fixed an issue where wrong values for some DITA parameters related to PDF security were sent to Chemistry.
- Oxygen PDF Chemistry: Fixed an issue where a generated PDF opened on the second page when both a zoom factor and a page layout for the PDF viewer were set.
- WebHelp Responsive: Fixed an issue where the button that toggles the publication Table of Contents was not working for small screens.
- WebHelp Responsive: Fixed an issue where the tooltip appeared far away from the corresponding topic title in the publication Table of Contents (ToC).
- WebHelp Responsive: Fixed an issue where a web page was scrolled lower than it should when navigating to a section of the page by using a shared link that contains an anchor, or when clicking on the corresponding link symbol.
New in SyncBackPro 9.5.75.0 Beta (Dec 10, 2021)
- Fixed: Crash when scanning a folder that has junction points to drives not mounted via drive letters
New in SyncBackPro 9.5.74.0 Beta (Dec 7, 2021)
- Fixed (Pro): Google Drive HTTP 500 error when reading root folder content
New in SyncBackPro 10.1.21.0 Beta (Dec 7, 2021)
- Fixed (Pro): Google Drive HTTP 500 error when reading root folder content
New in SyncBackPro 10.1.19.0 Beta (Dec 6, 2021)
- Fixed: NTFS security changes with synchronization
New in SyncBackPro 10.1.18.0 Beta (Dec 2, 2021)
- New (Pro): Option to use LZMA compression for emailing compressed log files
- Updated: Czech translations
- Updated: The pop-up menu in File & Folder Selection is now split vertically
- Updated: Taskbar icon shows paused overly now even if not using tray icon
- Updated: Understands WSL2 path \wsl.localhost
- Updated: Various small tweaks to the user interface
- Updated: When using standard file copying, retry pause is longer with Windows error ERROR_NO_SUCH_DEVICE
- Updated (Pro): Enable multipart uploads with Signature V4 when using Google Storage via S3 compatibility mode
- Fixed: Include new files pop-up menu items in File & Folder Selection window were incorrect
- Fixed: Password edit boxes color wrong when editing in a dark style
- Fixed: Improved FTP/SFTP server disconnection detection when using WoD
- Fixed (SE/Pro): File and Folder selections not working with Touch when using variables
New in SyncBackPro 9.5.72.0 Beta (Nov 29, 2021)
- Fixed: Include new files pop-up menu items in File & Folder Selection window were incorrect
- Fixed: Password edit boxes color wrong when editing in a dark style
- Fixed: Improved FTP/SFTP server disconnection detection when using WoD
- Fixed (SE/Pro): File and Folder selections not working with Touch when using variables
New in SyncBackPro 10.1.17.0 Beta (Nov 29, 2021)
- Fixed (SE/Pro): File and Folder selections not working with Touch when using variables
New in SyncBackPro 10.1.15.0 Beta (Nov 25, 2021)
- New (Pro): Option to use LZMA compression for emailing compressed log files
- Updated: Czech translations
- Updated: The pop-up menu in File & Folder Selection is now split vertically
- Updated: Taskbar icon shows paused overly now even if not using tray icon
- Updated: Understands WSL2 path \wsl.localhost
- Updated: Various small tweaks to the user interface
- Updated: When using standard file copying, retry pause is longer with Windows error ERROR_NO_SUCH_DEVICE
- Fixed: Include new files pop-up menu items in File & Folder Selection window were incorrect
- Fixed: Password edit boxes color wrong when editing in a dark style
- Fixed: Improved FTP/SFTP server disconnection detection when using WoD
New in SyncBackPro 10.1.14.0 Beta (Nov 25, 2021)
- New (Pro): Option to use LZMA compression for emailing compressed log files
- Updated: When using standard file copying, retry pause is longer with Windows error ERROR_NO_SUCH_DEVICE
New in SyncBackPro 10.1.13.0 Beta (Nov 24, 2021)
- Updated: Various small tweaks to the user interface
New in SyncBackPro 10.1.12.0 Beta (Nov 23, 2021)
- Updated: Understands WSL2 path \wsl.localhost
- Fixed: Improved FTP/SFTP server disconnection detection when using WoD
New in SyncBackPro 9.5.70.0 Beta (Nov 23, 2021)
- Fixed: Include new files pop-up menu items in File & Folder Selection window were incorrect
- Fixed: Password edit boxes color wrong when editing in a dark style
New in SyncBackPro 10.1.10.0 Beta (Nov 22, 2021)
- Updated: Taskbar icon shows paused overly now even if not using tray icon.
New in SyncBackPro 10.1.9.0 Beta (Nov 22, 2021)
- Updated: Czech translations
- Updated: The pop-up menu in File & Folder Selection is now split vertically
- Fixed: Include new files pop-up menu items in File & Folder Selection window were incorrect
- Fixed: Password edit boxes color wrong when editing in a dark style
New in SyncBackPro 10.1.8.0 (Nov 19, 2021)
- Updated: Changed to double-click for Result, Source and Destination columns
- Updated (Pro): Improved feedback when creating Sharefile, Sharepoint and Egnyte profiles
- Updated: Default exclusion filter now includes *AppDataLocalMicrosoftWindowsApps
- Fixed: In rare cases the tray icon may not appear on login (due to system load)
New in SyncBackPro 10.1.7.0 (Nov 19, 2021)
- Updated: Changed to double-click for Result, Source and Destination columns
- Updated (Pro): Improved feedback when creating Sharefile, Sharepoint and Egnyte profiles
- Updated: Default exclusion filter now includes *AppDataLocalMicrosoftWindowsApps
- Fixed: In rare cases the tray icon may not appear on login (due to system load)
New in SyncBackPro 10.1.7.0 Beta (Nov 18, 2021)
- Updated: Changed to double-click for Result, Source and Destination columns
- Updated: Default exclusion filter now includes *AppDataLocalMicrosoftWindowsApps
- Fixed: In rare cases the tray icon may not appear on login (due to system load)
New in SyncBackPro 10.1.6.0 Beta (Nov 17, 2021)
- Updated (Pro): Improved feedback when creating Sharefile, Sharepoint and Egnyte profiles
New in SyncBackPro 10.1.3.0 Beta (Nov 11, 2021)
- Updated: Changed to double-click for Result, Source and Destination columns.
- Fixed: In rare cases the tray icon may not appear on login (due to system load).
New in SyncBackPro 10.1.2.0 Beta (Nov 11, 2021)
- Updated: Changed to double-click for Result, Source and Destination columns.
- Fixed: In rare cases the tray icon may not appear on login (due to system load).
New in SyncBackPro 10.1.1.0 Beta (Nov 11, 2021)
- Updated: In rare cases the tray icon may not appear (due to system load). SyncBack will now try again to create the tray icon when minimized or restored.
New in SyncBackPro 10.1.0.0 (Nov 9, 2021)
- New (Pro): Can now choose to skip offline cloud files (as in previous versions) and/or offline NTFS files (new in this version)
- New: Windows 11 styles and styles now loaded from files instead of embedded in executable
- New: If using ransomware detection in source and/or destination then log shows if success
- Fixed: Styled file open and save dialogs are no longer used
- Fixed: Buttons in main interface not resized correctly when changing language
- Fixed (Pro): Properly handle special characters in file/folder names in PCloud
- Fixed (Pro): Can now upload empty files to PCloud
- Fixed (Pro): Objects uploaded to Backblaze B2 with other tools (and invalid properties) may be treated as folders
- Fixed: System (notification) tray icon did not reappear if Explorer process restarted
- Fixed: New program version window may be too small
- Fixed (Pro): Fix a problem in Dropbox and Google Drive where files uploaded by 3rd party apps, or via web, are not been detected as been changed/different
- Updated: The display filters in the Differences window are now correct when copying from FTP, Touch, cloud, etc.
- Updated (Pro): Can use SSE-C with Backblaze B2 when using S3 compatibility
- Updated (Pro): Support new Wasabi endpoint in Japan
- Updated: Recompiled using latest compiler
- Updated: When copying from destination, e.g. cloud, then it is more likely to be correctly shown in interface
- Updated: Icons in user interface and various updates and fixes to interface
- Updated (Pro): Change in S3 to always try multipart uploads and determine if the feature is available
- Updated (SE/Pro): Logging the reason was files are skipped is now enabled by default for new profiles
New in SyncBackPro 10.0.22.0 Beta (Nov 5, 2021)
- New: If using ransomware detection in source and/or destination then log shows if success
New in SyncBackPro 10.0.20.0 Beta (Nov 3, 2021)
- New (Pro): Can now choose to skip offline cloud files (as in previous versions) and/or offline NTFS files (new in this version)
- New: Windows 11 styles and styles now loaded from files instead of embedded in executable
- Fixed: Styled file open and save dialogs are no longer used
- Fixed: Buttons in main interface not resized correctly when changing language
- Fixed (Pro): Properly handle special characters in file/folder names in PCloud
- Fixed (Pro): Can now upload empty files to PCloud
- Fixed (Pro): Objects uploaded to Backblaze B2 with other tools (and invalid properties) may be treated as folders
- Fixed: System (notification) tray icon did not reappear if Explorer process restarted
- Fixed: New program version window may be too small
- Fixed (Pro): Fix a problem in Dropbox and Google Drive where files uploaded by 3rd party apps, or via web, are not been detected as been changed/different
- Updated: The display filters in the Differences window are now correct when copying from FTP, Touch, cloud, etc.
- Updated (Pro): Can use SSE-C with Backblaze B2 when using S3 compatibility
- Updated (Pro): Support new Wasabi endpoint in Japan
- Updated: Recompiled using latest compiler
- Updated: When copying from destination, e.g. cloud, then it is more likely to be correctly shown in interface
- Updated: Icons in user interface and various updates and fixes to interface
- Updated (Pro): Change in S3 to always try multipart uploads and determine if the feature is available.
New in SyncBackPro 10.0.19.0 Beta (Nov 2, 2021)
- Updated: Icons in user interface and various updates and fixes to interface
- Updated (Pro): Change in S3 to always try multipart uploads and determine if the feature is available.
New in SyncBackPro 9.5.60.0 Beta (Nov 1, 2021)
- Fixed (Pro): Objects uploaded to Backblaze B2 with other tools (and invalid properties) may be treated as folders
- Fixed: System (notification) tray icon did not reappear if Explorer process restarted
- Fixed: New program version window may be too small
- Fixed (Pro): Fix a problem in Dropbox and Google Drive where files uploaded by 3rd party apps, or via web, are not been detected as been changed/different
- Updated: Recompiled using latest compiler
New in SyncBackPro 10.0.18.0 Beta (Nov 1, 2021)
- New (Pro): Can now choose to skip offline cloud files (as in previous versions) and/or offline NTFS files (new in this version)
- New: Windows 11 styles and styles now loaded from files instead of embedded in executable
- Fixed: Styled file open and save dialogs are no longer used
- Fixed: Buttons in main interface not resized correctly when changing language
- Fixed (Pro): Properly handle special characters in file/folder names in PCloud
- Fixed (Pro): Can now upload empty files to PCloud
- Fixed (Pro): Objects uploaded to Backblaze B2 with other tools (and invalid properties) may be treated as folders
- Fixed: New program version window may be too small
- Fixed (Pro): Fix a problem in Dropbox and Google Drive where files uploaded by 3rd party apps, or via web, are not been detected as been changed/different
- Updated: The display filters in the Differences window are now correct when copying from FTP, Touch, cloud, etc.
- Updated (Pro): Can use SSE-C with Backblaze B2 when using S3 compatibility
- Updated (Pro): Support new Wasabi endpoint in Japan
- Updated: Recompiled using latest compiler
- Updated: When copying from destination, e.g. cloud, then it is more likely to be correctly shown in interface
- Updated: Icons in user interface
New in SyncBackPro 10.0.13.0 Beta (Oct 25, 2021)
- New (Pro): Can now choose to skip offline cloud files (as in previous versions) and/or offline NTFS files (new in this version)
- New: Windows 11 styles and styles now loaded from files instead of embedded in executable
- Fixed: Styled file open and save dialogs are no longer used
- Fixed: Buttons in main interface not resized correctly when changing language
- Fixed (Pro): Properly handle special characters in file/folder names in PCloud
- Fixed (Pro): Can now upload empty files to PCloud
- Fixed (Pro): Objects uploaded to Backblaze B2 with other tools (and invalid properties) may be treated as folders
- Fixed: System (notification) tray icon did not reappear if Explorer process restarted
- Updated: The display filters in the Differences window are now correct when copying from FTP, Touch, cloud, etc.
- Updated (Pro): Can use SSE-C with Backblaze B2 when using S3 compatibility
- Updated (Pro): Support new Wasabi endpoint in Japan
- Updated: Recompiled using latest compiler
- Updated: When copying from destination, e.g. cloud, then it is more likely to be correctly shown in interface
- Updated: Icons in user interface
New in SyncBackPro 10.0.10.0 Beta (Oct 20, 2021)
- Fixed: System (notification) tray icon did not reappear if Explorer process restarted
New in SyncBackPro 10.0.9.0 Beta (Oct 20, 2021)
- Fixed (Pro): Properly handle the plus (+) sign in file names in PCloud
- Fixed (Pro): Objects uploaded to Backblaze B2 with other tools (and invalid properties) may be treated as folders
New in SyncBackPro 10.0.8.0 Beta (Oct 19, 2021)
- New (Pro): Can now choose to skip offline cloud files (as in previous versions) and/or offline NTFS files (new in this version)
- New: Windows 11 styles and styles now loaded from files instead of embedded in executable
- Fixed: Styled file open and save dialogs are no longer used
- Fixed: Buttons in main interface not resized correctly when changing language
- Updated: The display filters in the Differences window are now correct when copying from FTP, Touch, cloud, etc.
- Updated (Pro): Can use SSE-C with Backblaze B2 when using S3 compatibility
- Updated (Pro): Support new Wasabi endpoint in Japan
- Updated: Recompiled using latest compiler
New in SyncBackPro 10.0.7.0 Beta (Oct 18, 2021)
- New: Windows 11 styles and styles now loaded from files instead of embedded in executable
New in SyncBackPro 10.0.6.0 Beta (Oct 15, 2021)
- New (Pro): Can now choose to skip offline cloud files (as in previous versions) and/or offline NTFS files (new in this version)
- Fixed: Buttons in main interface not resized correctly when changing language
- Updated: The display filters in the Differences window are now correct when copying from FTP, Touch, cloud, etc.
- Updated (Pro): Can use SSE-C with Backblaze B2 when using S3 compatibility
- Updated (Pro): Support new Wasabi endpoint in Japan
New in SyncBackPro 10.0.5.0 Beta (Oct 13, 2021)
- Fixed: Styled file open and save dialogs are no longer used
- Updated: Can use SSE-C with Backblaze B2 when using S3 compatibility
- Updated: Recompiled using latest compiler
New in SyncBackPro 10.0.4.0 (Oct 11, 2021)
- Fixed: Splash window showing when run unattended
- Fixed: Typo in version number in rollback text when uninstalling
- Fixed: Search results in profile configuration are translated (if not using English)
- Updated: French and Polish translations
- Updated: The notification (aka system tray) icon will not be hidden on future updates or upgrades
- Updated: When importing a group profile SyncBack will state if any invalid profiles were automatically removed from the group
New in SyncBackPro 10.0.3.0 Beta (Oct 8, 2021)
- Fixed: Splash window showing when run unattended
- Fixed: Typo in version number in rollback text when uninstalling
New in SyncBackPro 10.0.1.0 Beta (Oct 6, 2021)
- Fixed: Splash window showing when run unattended
- Fixed: Typo in version number in rollback text when uninstalling
New in SyncBackPro 10.0.0.0 (Oct 4, 2021)
- SyncBack Touch is now free for use with SyncBackPro V10 and SyncBackSE V10 (not free with V9 or older)
- SyncBack Management Service (SBMS) is now free for use with SyncBackPro V10 (not free with V9 or older)
- New (Pro): Support for Citrix ShareFile
- New (Pro): Support for pCloud
- New (Pro): Object tagging in Amazon S3
- New (Pro): Customer-provided encryption key (SSE-C) support for S3 (including Wasabi and Oracle when using S3 compatibility)
- New (Pro): Support for newer version of Azure API so the maximum file size has increased along with better performance
- New: New FTP and SFTP engine (DevArt)
- New: New FTP and SFTP engine (Chilkat)
- New: You can now export file and folder selections to a text file or comma-delimited CSV file
- New: When restoring you can choose the files and folders that should be checked for restoration
- New: Drives tab in Global Settings that shows all connected drives and their status
- New: Automatically uses newer Segoe UI Variable font if available (to give better scaling)
- New: Splash progress window when starting SyncBack
- New: On the main window, you can click on the Result, Source and Destination columns to view the log and open the source/destination location (if applicable)
- New (Pro/SE): New variables including VERSIONSCREATEDTOTAL, VERSIONSCREATEDSRC, VERSIONSCREATEDDEST, COMPAREACCESSDATETIMETOTAL and numerous special folder variables (FOLDERID_...)
- New (Pro/SE): Global Variables (user-defined variables that can be used by all profiles)
- New (Pro/SE): Webhook support (for notifications when a profile ends)
- New: When running profiles periodically in the background you can now specify which times it can start in and on which days of the week
- New: You can now ignore, or only include, files modified and/or created within a certain time-frame
- New: Experimental support for IPV6 with FTP and SFTP
- New (Pro/SE): Last Access date & time for files and folders can now be compared and copied
- New: Group profile can be configured to abort if any profiles fail
- New (Pro/SE): Option to silently fail if no network and/or Internet connection is detected by Windows
- New (Pro/SE): Can silently fail if Windows is and/or is not connected to a specific network
- New: Option to email log if there are errors or no differences
- New (Pro/SE): Log file records total number of versions created and also reports if a version of a file was created
- Updated: When profiles are run in parallel there is a large performance improvement
- Updated (Pro/SE): Regular Expression filters are much faster
- Updated (Pro): Fast Backup can now be used with all cloud services (except Backblaze B2) which can result in much faster backups
- Updated (Pro): Improved performance with Egnyte when using versioning or safe copies
- Updated (Pro): Reduced memory usage with Box, Google Drive, OneDrive Updated: Faster log file creation (if not using appended text log files)
- Updated: Faster profiles backup on program exit
- Updated: Faster folder expansion in File and Folder Selection window
- Updated: Faster folder listing in File and Folder Selection window for FTP servers that do not support MLSD/MLST
- Updated: Faster debug output
- Updated (Pro/SE): Support for Rapid Transfer in SyncBack Touch (requires SyncBack Touch V1.5.0 or newer)
- Updated (Pro): With SyncBackPro you can choose to use more memory to improve performance or less memory to reduce memory usage
- Updated (Pro/SE): Concurrent downloads for large files (Eldos FTP)
- Updated: The Windows 10 style now uses the same color icons as the Windows style
- Updated: Ransomware detection is now possible with FTP, SFTP, cloud storage, MTP, VHD, remote file-systems and SyncBack Touch
- Updated (Pro): TLS V1.2 is now used for all cloud services (the option to use V1.0 or V1.1 is no longer available)
- Updated: The default exclusion filters have been updated
- Updated (Pro/SE): New Fast Backup re-scan decision variables added, e.g. %DAY_P%
- Updated (Pro/SE): Fast Backup re-scan decision can now use less than (<), less than or equal (<=), greater than (>) or greater than or equal (>=)
New in SyncBackPro 9.5.52.0 Beta (Sep 28, 2021)
- Updated: Improve compatibility with ProFTPd
New in SyncBackPro 9.5.50.0 Beta (Sep 24, 2021)
- Updated: Polish translations
New in SyncBackPro 9.5.49.0 Beta (Sep 20, 2021)
- Fixed (Pro): If using Exchange cloud account then it will now reauthorize (from Cloud Accounts window) if refresh token has expired
New in SyncBackPro 9.5.47.0 Beta (Sep 8, 2021)
- Fixed: Searching within profile configuration may cause crash or lockup
- Updated: Tree component
New in SyncBackPro 9.5.46.0 Beta (Sep 8, 2021)
New in SyncBackPro 9.5.43.0 Beta (Sep 3, 2021)
- Fixed: Eldos SFTP was not always reconnecting when it needed to
New in SyncBackPro 10.0.0.0 Beta (Sep 1, 2021)
- Value:
- SyncBack Touch is now free for use with SyncBackPro V10 and SyncBackSE V10
- The SyncBack Management Service (SBMS) is now free for use with SyncBackPro V10. Simply enter your SyncBackPro serial number into the SBMS Console for unlimited free connections.
- Performance:
- When profiles are run in parallel there is a large performance improvement. For example: a group profile with two profiles (set to run them in parallel, i.e. at the same time) was run in V9 and V10. In V9 the total run-time was 1 minutes 3 seconds, but in V10 it was just 49 seconds. Profile 1 scanned over 340,000 files and profile 2 scanned over 210,00 files (on a different drive).
- Regular Expression filters are much faster
- Fast Backup can now be used with all cloud services (except Backblaze B2) which can result in much faster backups
- Improved performance with Egnyte when using versioning or safe copies
- Faster log file creation (if not using appended text log files)
- Faster profiles backup on program exit
- Faster folder expansion in File and Folder Selection window
- Faster folder listing in File and Folder Selection window for FTP servers that do not support MLSD/MLST
- Faster debug output
- Support for Rapid Transfer in SyncBack Touch (requires SyncBack Touch V1.5.0 or newer)
- With SyncBackPro you can choose to use more memory to improve performance or less memory to reduce memory usage
- Concurrent downloads for large files (Eldos FTP)
- User Interface:
- You can now export file and folder selections to a text file or comma-delimited CSV file
- When restoring you can choose the files and folders that should be checked for restoration
- New Drives tab in Global Settings that shows all connected drives and their status
- Automatically uses newer Segoe UI Variable font if available (to give better scaling)
- Splash progress window when starting SyncBack
- On the main window, you can click on the Result, Source and Destination columns to view the log and open the source/destination location (if applicable)
- The Windows 10 style now uses the same color icons as the Windows style
- Cloud:
- Support for Citrix ShareFile
- Support for pCloud
- Object tagging in Amazon S3
- Customer-provided encryption key (SSE-C) support for S3 (including Wasabi and Oracle when using S3 compatibility)
- Fast Backup can now be used with all cloud services (except Backblaze B2) which can result in much faster backups
- Support for newer version of Azure API so the maximum file size has increased along with better performance
- Improved performance with Egnyte when using versioning or safe copies
- Reduced memory usage with Box, Google Drive, OneDrive
- FTP:
- New FTP and SFTP engine (DevArt)
- New FTP and SFTP engine (Chilkat)
- Concurrent downloads for large files (Eldos FTP)
- Security:
- Ransomware detection is now possible with FTP, SFTP, cloud storage, MTP, VHD, remote file-systems and SyncBack Touch. It is not supported with Google Photos, backup of email or location scripts.
- TLS V1.2 is now used for all cloud services (the option to use V1.0 or V1.1 is no longer available)
- Misc:
- New variables including VERSIONSCREATEDTOTAL, VERSIONSCREATEDSRC, VERSIONSCREATEDDEST, COMPAREACCESSDATETIMETOTAL and numerous special folder variables (FOLDERID_...)
- Global Variables (user-defined variables that can be used by all profiles)
- Webhook support (for notifications when a profile ends)
- When running profiles periodically in the background you can now specify which times it can start in and on which days of the week
- You can now ignore, or only include, files modified and/or created within a certain time-frame
- Experimental support for IPV6 with FTP and SFTP
- Last Access date & time for files and folders can now be compared and copied
- Group profile can be configured to abort if any profiles fail
- Option to silently fail if no network and/or Internet connection is detected by Windows
- Can silently fail if Windows is and/or is not connected to a specific network
- Option to email log if there are errors or no differences
- Log file records total number of versions created and also reports if a version of a file was created
- The default exclusion filters have been updated
- New Fast Backup re-scan decision variables added, e.g. %DAY_P%
- Fast Backup re-scan decision can now use less than (<), less than or equal (<=), greater than (>) or greater than or equal (>=)
New in SyncBackPro 9.5.41.0 Beta (Aug 13, 2021)
- Fixed (Pro): New Profile wizard was not using global TLS setting
- Fixed: When not run elevated, e.g. SyncBackFree, there may be excessive temporary large memory allocations when copying files
- Fixed (SE): SyncBackSE 64-bit No Install Zip was using 32-bit WeOnlyDo FTP DLL'
- Updated (Pro): For SysLog, it will use severity of Error if profile run fails
- Updated (Pro): Now raises error when setting the blob tier fails in Azure
New in SyncBackPro 9.5.39.0 Beta (Aug 10, 2021)
- Fixed (Pro): New Profile wizard was not using global TLS setting
- Updated (Pro): For SysLog, it will use severity of Error if profile run fails
New in SyncBackPro 9.9.5.37.0 Beta (Aug 2, 2021)
- Fixed (Pro): New Profile wizard was not using global TLS setting
- Updated (Pro): For SysLog, it will use severity of Error if profile run fails
New in SyncBackPro 9.5.37.0 Beta (Aug 2, 2021)
- Fixed (Pro): New Profile wizard was not using global TLS setting
- Updated (Pro): For SysLog, it will use severity of Error if profile run fails
New in SyncBackPro 9.5.36.0 (Jul 28, 2021)
- Updated: Tested on Windows 11 BETA, no issues found
- Updated: HTML log file now includes more obvious link to errors and warnings first page
- Updated (SE/Pro): You can enter an offline Upgrade Assurance serial number
- Fixed: Treeview control (main window, File and Folder selection, Differences window) now works correctly with higher DPI and styles
- Fixed: Updated Box to better handle multiple Box profiles running under the same instance using linked account
- Fixed: Manifest file was not stating Per Monitor V2 support
- Fixed: On lower resolution displays the pop-up menu on the main window and file folder selections is modified to fit
- Fixed (Pro): Getting complete list of Containers from Azure Blob Storage may fail
- Fixed (Pro): When importing a profile that has a schedule, and shared cloud accounts are used, the schedule may fail to import
- Fixed: With Eldos FTP engine, when control channel disconnected it may fail to reconnect
- Fixed (Pro): Changes to the way entries are deleted from the cloud (meta-data) database
- Fixed (Pro): Remove excess versions when uploading new small files to OneDrive Business/Sharepoint
New in SyncBackPro 9.5.35.0 Beta (Jul 27, 2021)
- Fixed (Pro): Remove excess versions when uploading new small files to OneDrive Business/Sharepoint
New in SyncBackPro 9.5.33.0 Beta (Jul 15, 2021)
- Fixed (Pro): Changes to the way entries are deleted from the cloud (meta-data) database
New in SyncBackPro 9.5.32.0 Beta (Jul 12, 2021)
- Fixed: Retry block upload when error "The specified blob or block content is invalid" occurs with Azure
New in SyncBackPro 9.5.31.0 Beta (Jul 9, 2021)
- Updated: Tested on Windows 11 BETA, no issues found
- Fixed: With Eldos FTP engine, when control channel disconnected it may fail to reconnect
New in SyncBackPro 9.5.30.0 Beta (Jul 8, 2021)
- Fixed (Pro): When importing a profile that has a schedule, and shared cloud accounts are used, the schedule may fail to import
New in SyncBackPro 9.5.29.0 Beta (Jun 21, 2021)
- Fixed: On lower resolution displays the pop-up menu on the main window and file folder selections is modified to fit
- Fixed (Pro): Getting complete list of Containers from Azure Blob Storage may fail
New in SyncBackPro 9.5.27.0 Beta (Jun 17, 2021)
- Updated: HTML log file now includes more obvious link to errors and warnings first page
- Updated (SE/Pro): You can enter an offline Upgrade Assurance serial number
- Fixed: Treeview control (main window, File and Folder selection, Differences window) now works correctly with higher DPI and styles
- Fixed: Updated Box to better handle multiple Box profiles running under the same instance using linked account
- Fixed: Manifest file was not stating Per Monitor V2 support
New in SyncBackPro 9.5.26.0 Beta (Jun 11, 2021)
- Updated (SE/Pro): You can enter an offline Upgrade Assurance serial number
New in SyncBackPro 9.5.25.0 Beta (Jun 9, 2021)
- Updated: HTML log file now includes more obvious link to errors and warnings first page
- Fixed: Updated Box to better handle multiple Box profiles running under the same instance using linked account.
New in SyncBackPro 9.5.23.0 Beta (Jun 2, 2021)
- Fixed: Treeview control (main window, File and Folder selection, Differences window) now works correctly with higher DPI and styles
New in SyncBackPro 9.5.22.0 (Jun 2, 2021)
- Fixed (Pro): Azure SAS signature was not being restored when the blob service was recreated after a network error
- Fixed (Pro): If Box refresh token is invalidated during profile run then profile will now stop
- Updated: Columns at bottom-left of Differences window are switched if copying from destination to source
- Updated (SE/Pro): WinMerge will be added to Comparison Programs automatically (when opened) if it exists
- Updated (Pro): Fine tune behavior for OneDrive HTTP response 400 to retry only when it's a genuine error 400 and not a server failure
- Updated (Pro): Translation of invalid filenames setting is now used with Dropbox
- Updated (Pro): Egnyte API requests per second improvements
- Updated (Pro): Support VPC endpoints with S3
- Updated (Pro): Extract additional error messages from Egnyte
- Updated (Pro): TLS v1.2 always used for OneDrive/SharePoint (requirement of service)
New in SyncBackPro 9.5.22.0 Beta (Jun 1, 2021)
- Fixed (Pro): Azure SAS signature was not being restored when the blob service was recreated after a network error
- Fixed (Pro): If Box refresh token is invalidated during profile run then profile will now stop
- Updated: Columns at bottom-left of Differences window are switched if copying from destination to source
- Updated (SE/Pro): WinMerge will be added to Comparison Programs automatically (when opened) if it exists
- Updated (Pro): Fine tune behavior for OneDrive HTTP response 400 to retry only when it's a genuine error 400 and not a server failure
- Updated (Pro): Translation of invalid filenames setting is now used with Dropbox
- Updated (Pro): Egnyte API requests per second improvements
- Updated (Pro): Support VPC endpoints with S3
- Updated (Pro): Extract additional error messages from Egnyte
- Updated (Pro): TLS v1.2 always used for OneDrive/SharePoint (requirement of service)
New in SyncBackPro 9.5.19.0 Beta (May 27, 2021)
- Fixed (Pro): Azure SAS signature was not being restored when the blob service was recreated after a network error
- Updated: Columns at bottom-left of Differences window are switched if copying from destination to source
- Updated (SE/Pro): WinMerge will be added to Comparison Programs automatically (when opened) if it exists
- Updated (Pro): Fine tune behavior for OneDrive HTTP response 400 to retry only when it's a genuine error 400 and not a server failure
- Updated (Pro): Translation of invalid filenames setting is now used with Dropbox
- Updated (Pro): Egnyte API requests per second improvements
- Updated (Pro): Support VPC endpoints with S3
- Updated (Pro): Extract additional error messages from Egnyte
- Updated (Pro): TLS v1.2 always used for OneDrive/SharePoint (requirement of service)
New in SyncBackPro 9.5.18.0 Beta (May 25, 2021)
- Fixed (Pro): Azure SAS signature was not being restored when the blob service was recreated after a network error
New in SyncBackPro 9.5.17.0 Beta (May 14, 2021)
- Updated (Pro): Support VPC endpoints with S3
- Updated (Pro): Extract additional error messages from Egnyte
- Updated (Pro): TLS v1.2 always used for OneDrive/SharePoint (requirement of service)
New in SyncBackPro 9.5.16.0 Beta (May 10, 2021)
- Updated (Pro): Translation of invalid filenames setting is now used with Dropbox
- Updated (Pro): Egnyte API requests per second improvements
New in SyncBackPro 9.5.14.0 Beta (May 1, 2021)
- Updated: Columns at bottom-left of Differences window are switched if copying from destination to source
- Updated (SE/Pro): WinMerge will be added to Comparison Programs automatically (when opened) if it exists
- Updated (Pro)): Fine tune behavior for OneDrive HTTP response 400 to retry only when it's a genuine error 400 and not a server failure
New in SyncBackPro 9.5.12.0 Beta (Apr 27, 2021)
- Fixed (Pro): OneDrive Personal, Business and SharePoint improved retries on scanning failure
New in SyncBackPro 9.5.10.0 Beta (Apr 20, 2021)
- Updated (Pro): Backblaze B2 always uses TLS 1.2 (as required)
- Fixed (Pro): Empty folders on Box considered not to exist
New in SyncBackPro 9.5.8.0 Beta (Apr 16, 2021)
- Updated (SE/Pro): Worker threads now used if two or more files being uploaded or download with FTP (was previously 5)
New in SyncBackPro 9.5.7.0 Beta (Apr 8, 2021)
- Updated: Easier to select shared settings
- Fixed (Pro): Fixed manifest file so backup of email with No Install now works
New in SyncBackPro 9.5.6.0 Beta (Mar 26, 2021)
- Updated: Uploading files with Eldos FTP improved
- Updated (SE/Pro): Improved SMART drive failure detection
- Updated: Network profile settings page shows if already connected and as who
- Updated (Pro): New Profile Wizard uses unencrypted cloud connection if URL is http
- Updated (Pro): Automatically falls back to using path style URL with S3 compatible servers if virtual hostname URL fails
- Fixed: Now compares encrypted file attribute when using FAT/exFAT and Windows 10 or newer
- Fixed (Pro): Better at remembering host key for SFTP connections when testing in profile configuration
New in SyncBackPro 9.5.5.0 Beta (Mar 9, 2021)
- Fixed (Pro): Fixed "SQLite3 Error 11 - database disk image is malformed" when using cloud
New in SyncBackPro 9.5.3.0 Beta (Mar 1, 2021)
- Updated: Temporary Zip files are moved by SyncBack instead of zip component (only if not encrypting filenames)
New in SyncBackPro 9.5.0.0 Beta (Feb 24, 2021)
- New (SE/Pro): Worker threads are now available for FTP/SFTP so multiple files can be delete at the same time (support for upload and download will be added later)
New in SyncBackPro 9.4.23.0 Beta (Feb 16, 2021)
- Updated (SE/Pro): SERIALALL and LABELALL variables deprecated and are now same as SERIAL and LABEL
- Fixed (Pro): When changing meta-data on cold storage object (S3 and Azure) then it will retrieve object so it can be changed later instead of failing
New in SyncBackPro 9.4.22.0 Beta (Feb 10, 2021)
- New: When using multi-zip the log file now states number of files ignored because filename extension is wrong (no need to enable logging of skipped files)
- Updated: Extra debug output for support
- Updated: Improved communication with Windows Task Scheduler. If have access rights also checks users permissions with task scheduler.
- Updated (Pro): Changed block size calculation for uploading large files to Azure
- Updated (SE/Pro): If a SyncBack serial is entered into Touch licensing, and SyncBack is not registered, then it will use serial to register SyncBack
- Fixed (Pro): Default to eu-west-1 region when location is set to EU to avoid problems with V4 signature
- Fixed (Pro): Egnyte may be failing to set meta-data
- Fixed (SE/Pro): FTP components failing to register when used heavily
- Fixed: With multi-zip it was not logging files ignored because they filename extension was wrong (except if using file system)
- Fixed: Case change renames for files and directories did not work on exFAT, FAT32 and FAT file systems (requires a two-step rename)
New in SyncBackPro 9.4.20.0 Beta (Feb 2, 2021)
- New: When using multi-zip the log file now states number of files ignored because filename extension is wrong (no need to enable logging of skipped files)
- Updated: Extra debug output for support
- Updated (Pro): Changed block size calculation for uploading large files to Azure
- Updated (SE/Pro): If a SyncBack serial is entered into Touch licensing, and SyncBack is not registered, then it will use serial to register SyncBack
- Fixed (Pro): Default to eu-west-1 region when location is set to EU to avoid problems with V4 signature
- Fixed (Pro): Egnyte may be failing to set meta-data
- Fixed (SE/Pro): FTP components failing to register when used heavily
- Fixed: With multi-zip it was not logging files ignored because they filename extension was wrong (except if using file system)
- Fixed: Case change renames for files and directories did not work on exFAT, FAT32 and FAT file systems (requires a two-step rename)
New in SyncBackPro 9.4.16.0 Beta (Jan 20, 2021)
- Fixed (Pro): Default to eu-west-1 region when location is set to EU to avoid problems with V4 signature
New in SyncBackPro 9.4.15.0 Beta (Jan 19, 2021)
- Updated: Extra debug output for support
New in SyncBackPro 9.4.14.0 (Jan 18, 2021)
- New: Maximum Compression option in the Technical Support Wizard
- Updated: Can use Alt key combinations in main window to show/hide menu at top (Alt-B, Alt-C, Alt-S, Alt-H, Alt-V, Alt-E, Alt-T, Alt-P)
- Updated: Can use Alt key combinations in Differences window to show/hide menu at top (Alt-F, Alt-D, Alt-S, Alt-R, Alt-E, Alt-M, Alt-L)
- Updated: Passwords can now not be shown unless they are initially blank or become blank
- Updated: Dialog text in Dialog Settings now uses default values for variable parts of text
- Updated (Pro): Support for short-lived tokens in Dropbox
- Updated (Pro): Large performance improvement with delta list scanning on Google Drive, Sharepoint, OneDrive for Business and OneDrive personal
- Fixed (SE/Pro): Could wrongly allow delta versioning in profile configuration for destination when using Fast Backup
- Fixed: When using multi-zip and file had invalid date and time then it was not compressing it
- Fixed (Pro): Change in WebDAV to ignore HTTP error 500 and not retry when trying to move a file if destination path does not exist
New in SyncBackPro 9.4.14.0 Beta (Jan 18, 2021)
- New: Maximum Compression option in the Technical Support Wizard
- Updated: Dialog text in Dialog Settings now uses default values for variable parts of text
- Updated (Pro): Large performance improvement with delta list scanning on Google Drive, Sharepoint, OneDrive for Business and OneDrive personal
New in SyncBackPro 9.4.12.0 Beta (Jan 12, 2021)
- Updated: Can use Alt key combinations in main window to show/hide menu at top (Alt-B, Alt-C, Alt-S, Alt-H, Alt-V, Alt-E, Alt-T, Alt-P)
- Updated: Can use Alt key combinations in Differences window to show/hide menu at top (Alt-F, Alt-D, Alt-S, Alt-R, Alt-E, Alt-M, Alt-L)
- Updated: Passwords can now not be shown unless they are initially blank or become blank
- Updated (Pro): Support for short-lived tokens in Dropbox
- Fixed (SE/Pro): Could wrongly allow delta versioning in profile configuration for destination when using Fast Backup
- Fixed: When using multi-zip and file had invalid date and time then it was not compressing it
- Fixed (Pro): Change in WebDAV to ignore HTTP error 500 and not retry when trying to move a file if destination path does not exist
New in SyncBackPro 9.4.9.0 Beta (Dec 31, 2020)
- Updated: Can use Alt key combinations in main window to show/hide menu at top (Alt-B, Alt-C, Alt-S, Alt-H, Alt-V, Alt-E, Alt-T, Alt-P)
- Updated: Can use Alt key combinations in Differences window to show/hide menu at top (Alt-F, Alt-D, Alt-S, Alt-R, Alt-E, Alt-M, Alt-L)
- Updated: Passwords can now not be shown unless they are initially blank or become blank
- Updated (Pro): Support for short-lived tokens in Dropbox
- Fixed (SE/Pro): Could wrongly enable delta versioning in profile configuration for destination when using Fast Backup
- Fixed: When using multi-zip and file had invalid date and time then it was not compressing it
- Fixed (Pro): Change in WebDAV to ignore HTTP error 500 and not retry when trying to move a file if destination path does not exist
New in SyncBackPro 9.4.8.0 Beta (Dec 21, 2020)
- Updated: Can use Alt key combinations in main window to show/hide menu at top (Alt-B, Alt-C, Alt-S, Alt-H, Alt-V, Alt-E, Alt-T, Alt-P)
- Updated: Can use Alt key combinations in Differences window to show/hide menu at top (Alt-F, Alt-D, Alt-S, Alt-R, Alt-E, Alt-M, Alt-L)
- Updated: Passwords can now not be shown unless they are initially blank or become blank
- Updated (Pro): Support for short-lived tokens in Dropbox
- Fixed (SE/Pro): Could wrongly enable delta versioning in profile configuration for destination when using Fast Backup
- Fixed: When using multi-zip and file had invalid date and time then it was not compressing it
New in SyncBackPro 9.4.6.0 Beta (Dec 16, 2020)
- Updated: Passwords can now not be shown unless they are initially blank or become blank
New in SyncBackPro 9.4.5.0 Beta (Dec 11, 2020)
- Updated: Can use Alt key combinations in Differences window to show/hide menu at top (Alt-F, Alt-D, Alt-S, Alt-R, Alt-E, Alt-M, Alt-L)
- Fixed (SE/Pro): Could wrongly enable delta versioning in profile configuration for destination when using Fast Backup
New in SyncBackPro 9.4.4.0 Beta (Dec 8, 2020)
- Updated: Can use Alt key combinations in main window to show/hide menu at top (Alt-B, Alt-C, Alt-S, Alt-H, Alt-V, Alt-E, Alt-T, Alt-P)
New in SyncBackPro 9.4.3.0 Beta (Nov 27, 2020)
- Updated: Can now choose to put computer to sleep or hibernate when profiles finish running
New in SyncBackPro 9.4.2.26 Beta (Nov 24, 2020)
- Fixed (Pro): May get access violation if using Engyte and cloud directory does not exist
- Fixed (Pro): Avoid problems if user cannot read metadata in Egnyte due to access rights
- Fixed (Pro): Error now correctly given if file is too large to upload to OneDrive
New in SyncBackPro 9.4.2.22 Beta (Nov 4, 2020)
- New: Re-introduced the introduction web page when SyncBack is first run
- Updated: Balloon hint displayed in filters window if filters are disabled
- Updated: Dutch translations (thanks to René Diepenbroek)
- Updated: The installer will allow installation even if SyncBack is running (if V9.4.2.19 or earlier is already installed then closing SyncBack may fail, but installation with a reboot is possible)
- Updated: The installer will not run if it (the installer) is already running
- Fixed: When using default style some dialog boxes may have some untranslated buttons
- Fixed: Help button in Global Settings went to wrong help file page (pressing F1 was OK)
- Fixed: When using volume GUIDs in source and/or destination it was not opening to correct folder (in profile configuration)
- Fixed: If files were copied/moved, and the total bytes copied/moved was zero, then the total bytes copied/moved was not logged
- Fixed (Pro): With Eldos SFTP it was only using UTF8 if set to always use UTF8
New in SyncBackPro 9.4.2.20 Beta (Nov 4, 2020)
- Updated: The installers will allow installation even if SyncBack is running (if V9.4.2.19 or earlier is already installed then closing SyncBack may fail, but installation with a reboot is possible)
- Updated: The installer will not run if it (the installer) is already running
New in SyncBackPro 9.4.2.19 Beta (Oct 28, 2020)
- Fixed: If files were copied/moved, and the total bytes copied/moved was zero, then the total bytes copied/moved was not logged
- Fixed (Pro): With Eldos SFTP it was only using UTF8 if set to always use UTF8
New in SyncBackPro 9.4.2.18 Beta (Oct 23, 2020)
- Fixed: When using volume GUIDs in source and/or destination it was not opening to correct folder (in profile configuration)
New in SyncBackPro 9.4.2.17 Beta (Oct 16, 2020)
- New: Re-introduced the introduction web page when SyncBack is first run
- Updated: Balloon hint displayed in filters window if filters are disabled
- Updated: Dutch translations (thanks to René Diepenbroek)
- Fixed: When using default style some dialog boxes may have some untranslated buttons
- Fixed: Help button in Global Settings went to wrong help file page (pressing F1 was OK)
New in SyncBackPro 9.4.2.16 Beta (Oct 12, 2020)
- New: Re-introduced the introduction web page when SyncBack is first run
- Fixed: When using default style some dialog boxes may have untranslated buttons
- Fixed: Help button in Global Settings went to wrong help file page (pressing F1 was OK)
New in SyncBackPro 9.4.2.15 (Oct 5, 2020)
- Fixed: French translation causing exception in profile configuration
- Fixed: Multi-threaded FTP scanning with WeOnlyDo may cause program crash
- Fixed (Pro): WebDAV failing to connect to some servers
- Updated: The default buffer size for file copying has been increased from 128KB to 2048KB
- Updated: The backup copy method internal buffer size has been increased from 128KB to 2048KB
- Updated (SE/Pro): When using a sync profile the default storage location for versions is now a sub-folder of the base folder
- Updated: Estimated time left is more accurate when copying a mix of large and small files
New in SyncBackPro 9.4.2.12 Beta (Oct 1, 2020)
- Fixed: Multi-threaded FTP scanning with WeOnlyDo may cause program crash
- Fixed (Pro): WebDAV failing to connect to some servers
New in SyncBackPro 9.4.2.10 (Sep 21, 2020)
- New: Edit Schedule button now has drop-down menu so can create a schedule to run only when logged on (no password required in this case)
- Updated: Fewer prompts about removing blank password restriction when creating schedules
- Updated (Pro): Cloud Accounts can now be re-authorized
- Updated: SBCMount has been removed and will be automatically deleted when updating
- Updated (Pro): Microsoft OneDrive for Business and SharePoint now use separate and different application IDs, old ones still supported
- Updated: Run history now records reason profile was run (trigger)
- Fixed (Pro): WebDAV not working due to change of compiler
- Fixed (Pro): Folder names containing single quotes could not be created on Google Drive
- Fixed (Pro): Date and time parsing for Egnyte
- Fixed (Pro): Some filenames, with a percentage sign in them, on some cloud services, may not work properly
- Fixed: Show/hide horizontal lines setting not remembered
- Fixed: /verysilent and /silent uninstall command line parameters were prompting about keeping settings
- Fixed: When creating new shared settings the settings changed on sub-pages were not initially saved
New in SyncBackPro 9.4.2.8 Beta (Sep 15, 2020)
- Updated (Pro): Microsoft OneDrive for Business and SharePoint now use separate and different application IDs, old ones still supported
New in SyncBackPro 9.4.2.6 Beta (Sep 11, 2020)
- New: Edit Schedule button now has drop-down menu so can create a schedule to run only when logged on (no password required in this case)
- Updated: Fewer prompts about removing blank password restriction when creating schedules
- Updated (Pro): Cloud Accounts can now be re-authorized
- Updated: SBCMount has been removed and will be automatically deleted when updating
- Fixed (Pro): WebDAV not working due to change of compiler
- Fixed (Pro): Folder names containing single quotes could not be created on Google Drive
- Fixed (Pro): Date and time parsing for Egnyte
- Fixed (Pro): Some filenames, with a percentage sign in them, on some cloud services, may not work properly
- Fixed: Show/hide horizontal lines setting not remembered
- Fixed: /verysilent and /silent uninstall command line parameters were prompting about keeping settings
- Fixed: When creating new shared settings the settings changed on sub-pages are also initially saved
New in SyncBackPro 9.4.2.5 Beta (Sep 7, 2020)
- Updated: Fewer prompts about removing blank password restriction when creating schedules
- Updated (Pro): Cloud Accounts can now be re-authorized
- Updated: SBCMount has been removed and will be automatically deleted when updating
- Fixed (Pro): Some filenames, with a percentage sign in them, on some cloud services, may not work properly
New in SyncBackPro 9.4.2.2 Beta (Sep 2, 2020)
- New: Edit Schedule button now has drop-down menu so can create a schedule to run only when logged on (no password required in this case)
- Updated (Pro): Cloud Accounts can now be re-authorized
- Fixed (Pro): WebDAV not working due to change of compiler
- Fixed (Pro): Folder names containing single quotes could not be created on Google Drive
- Fixed (Pro): Date and time parsing for Egnyte
- Fixed (Pro): Some filenames, with a percentage sign in them, on some cloud services, may not work properly
- Fixed: Show/hide horizontal lines setting not remembered
- Fixed: /verysilent and /silent uninstall command line parameters were prompting about keeping settings
- Fixed: When creating new shared settings the settings changed on sub-pages are also initially saved
New in SyncBackPro 9.4.2.1 Beta (Sep 2, 2020)
- Fixed (Pro): Some filenames, with a percentage sign in them, on some cloud services, may not work properly
- Fixed: Show/hide horizontal lines setting not remembered
- Fixed: /verysilent and /silent uninstall command line parameters were prompting about keeping settings
- Fixed: When creating new shared settings the settings changed on sub-pages are also initially saved
New in SyncBackPro 9.4.1.6 Beta (Aug 28, 2020)
- Fixed (Pro): WebDAV not working due to change of compiler
- Fixed (Pro): Folder names containing single quotes could not be created on Google Drive
- Fixed (Pro): Date and time parsing for Egnyte
- Fixed: Show/hide horizontal lines setting not remembered
- Fixed: /verysilent and /silent uninstall command line parameters were prompting about keeping settings
New in SyncBackPro 9.4.1.5 Beta (Aug 20, 2020)
- Fixed (Pro): WebDAV not working due to change of compiler
- Fixed (Pro): Folder names containing single quotes could not be created on Google Drive
- Fixed: Show/hide horizontal lines setting not remembered
- Fixed: /verysilent and /silent uninstall command line parameters were prompting about keeping settings
New in SyncBackPro 9.4.1.1 (Aug 13, 2020)
- New: In Burger Menu - > Preferences you can now choose to show horizontal and/or vertical grid lines
- Updated: Recompiled using latest compiler
- Updated (Pro/SE): Can right-click on status bar and choose to show/hide Upgrade Assurance details
- Updated: When click on status bar the About window is only shown if first part of status bar is clicked
- Fixed: May have crash when using OneDrive on local filesystem
New in SyncBackPro 9.4.1.0 Beta (Aug 13, 2020)
- New: In Burger Menu - > Preferences you can now choose to show horizontal and/or vertical grid lines
New in SyncBackPro 9.4.0.8 Beta (Aug 12, 2020)
- Updated: Recompiled using latest compiler
- Updated (Pro/SE): Can right-click on status bar and choose to show/hide Upgrade Assurance details
- Updated: When click on status bar the About window is only shown if first part of status bar is clicked
New in SyncBackPro 9.4.0.7 (Aug 11, 2020)
- New (Pro/SE): Pop-up menu item in main window to force a rescan for all selected Fast Backup profiles
- New: Right-click on column headers in main window to show/hide columns
- New: Copy/Delete -> Warning now has option to abort profile if too many files are going to be copied/moved
- Updated: When mounting VHD/VHDX files, and the file is read-only, then it is automatically mounted as read-only
- Updated (Pro/SE): Can now verify and hash compare local/network files that previously gave access denied error
- Updated: With the error "Cannot copy file (87): The parameter is incorrect" it will retry more and with longer pauses between retries
- Updated (Pro): Changes to support Google Drive shortcuts in root folder
- Fixed: Importing a profile while profile selected may create a new profile using a link
- Fixed: Desktop notifications sometimes using wrong title
- Fixed: As per Microsoft guidelines, on Windows 8 and newer the installers now have a single shortcut to SyncBack in the start menu, no sub-folder or other links
- Fixed: Action to perform when profiles end defaulted to Shutdown after a profile was modified or global settings changed
- Fixed (Pro): Egnyte timestamps format may be wrong due to different locale
- Fixed (Pro): Minor fix in WebDAV to ignore progress callback if total size is negative
New in SyncBackPro 9.4.0.5 Beta (Aug 4, 2020)
- New (Pro/SE): Pop-up menu item in main window to force a rescan for all selected Fast Backup profiles
- New: Right-click on column headers in main window to show/hide columns
- New: Copy/Delete -> Warning now has option to abort profile if too many files are going to be copied/moved
- Updated: When mounting VHD/VHDX files, and the file is read-only, then it is automatically mounted as read-only
- Updated (Pro/SE): Can now verify and hash compare local/network files that previously gave access denied error
- Updated: With the error "Cannot copy file (87): The parameter is incorrect" it will retry more and with longer pauses between retries
- Updated (Pro): Changes to support Google Drive shortcuts in root folder
- Fixed: Importing a profile while profile selected may create a new profile using a link
- Fixed: Desktop notifications sometimes using wrong title
- Fixed: As per Microsoft guidelines, on Windows 8 and newer the installers now have a single shortcut to SyncBack in the start menu, no sub-folder or other links
- Fixed: Action to perform when profiles end defaulted to Shutdown after a profile was modified or global settings changed
- Fixed (Pro): Egnyte timestamps format may be wrong due to different locale
- Fixed (Pro): Minor fix in WebDAV to ignore progress callback if total size is negative
New in SyncBackPro 9.4.0.1 Beta (Jul 17, 2020)
- New (Pro/SE): Pop-up menu item in main window to force a rescan for all selected Fast Backup profiles
- New: Right-click on column headers in main window to show/hide columns
- New: Copy/Delete -> Warning now has option to abort profile if too many files are going to be copied/moved
- Updated: When mounting VHD/VHDX files, and the file is read-only, then it is automatically mounted as read-only
- Updated (Pro/SE): Can now verify and hash compare local/network files that previously gave access denied error
- Fixed: Importing a profile while profile selected may create a new profile using a link
- Fixed: Desktop notifications sometimes using wrong title
- Fixed: As per Microsoft guidelines, on Windows 8 and newer the installers now have a single shortcut to SyncBack in the start menu, no sub-folder or other links
- Fixed: Action to perform when profiles end defaulted to Shutdown after a profile was modified or global settings changed
- Fixed (Pro): Egnyte timestamps format may be wrong due to different locale
New in SyncBackPro 9.3.5.0 Beta (Jul 15, 2020)
- New (Pro/SE): Pop-up menu item in main window to force a rescan for all selected Fast Backup profiles
- New: Right-click on column headers in main window to show/hide columns
- Updated: When mounting VHD/VHDX files, and the file is read-only, then it is automatically mounted as read-only
New in SyncBackPro 9.3.43.0 Beta (Jul 6, 2020)
- Fixed: Importing a profile while profile selected may create a new profile using a link
- Fixed: Desktop notifications sometimes using wrong title
- Fixed: As per Microsoft guidelines, on Windows 8 and newer the installers now have a single shortcut to SyncBack in the start menu, no sub-folder or other links
- Fixed: Action to perform when profiles end defaulted to Shutdown after a profile was modified or global settings changed
New in SyncBackPro 9.3.42.0 Beta (Jul 3, 2020)
- Fixed: Importing a profile while profile selected may create a new profile using a link
- Fixed: Desktop notifications sometimes using wrong title
- Fixed: As per Microsoft guidelines, on Windows 8 and newer the installers now have a single shortcut to SyncBack in the start menu, no sub-folder or other links
New in SyncBackPro 9.3.40.0 (Jul 1, 2020)
- New (Pro): S3 compatibility support for Oracle Cloud
- New (Pro): Option to record files that could not be retrieved because they are in cold storage as warnings instead of errors
- New: Can choose not to copy reparse (Junction) point files (these are often symbolic links on Windows Subsystem for Linux)
- New: Option to record files that could not be copied because they are locked (open) as warnings instead of errors
- New: -vgn command line parameter to run a profile as part of a group (so the group variables can be used by the profile)
- Updated (Pro): With SFTP keyboard authentication, all SFTP engines will default to using SFTP password if user cannot be prompted
- Updated (Pro): S3 endpoints
- Updated: On Differences window, the pop-up menu now lets you choose an action even if it does not apply to all selected items
- Updated: When filters are changed there are now fewer prompts to change existing file and folder selections to match new filters
- Updated: SmartFTP is deprecated and will be removed in future versions
- Updated: OpenSSL libraries
- Fixed (Pro/SE 64-bit): The installer was not detecting if SyncBackPro/SE was running
- Fixed: If the source or destination path is a symbolic link to a UNC path then it may fail
- Fixed: When using multi-zip it would record missing files as errors even when configured to record them as warnings
New in SyncBackPro 9.3.34.0 Beta (May 26, 2020)
- Updated: On Differences window, the pop-up menu now lets you choose an action even if it does not apply to all selected items
- Fixed: If the source or destination path is a symbolic link to a UNC path then it may fail
New in SyncBackPro 9.3.31.0 Beta (May 19, 2020)
- New (Pro): S3 compatibility support for Oracle Cloud
- Updated (Pro): With SFTP keyboard authentication, all SFTP engines will default to using SFTP password if user cannot be prompted
New in SyncBackPro 9.3.30.0 (May 13, 2020)
- New (Pro): Support for S3 compatibility interface to Backblaze B2 (BETA)
- Updated: The filename sort order is now the same as in Windows File Explorer (Differences, File & Folder Selection and Directory Selection windows)
- Updated (Pro/SE): Client certificate support when using WeOnlyDo FTP with FTPS
- Updated (Pro): Log file now shows total cloud throttling time (if there was throttling)
- Updated (Pro): For Egnyte maximum worker threads, upload/download threads and scan threads is now 12
- Fixed: Log file was not showing total time worker threads waited for work
- Fixed: May fail to reconnect correctly to FTP server when scanning and using WeOnlyDo
- Fixed: Restore Wizard may show duplicate rollback dates
- Fixed (Pro): Correctly handle non-default S3 endpoints when using Signature V4
- Fixed (Pro): Files may get uploaded with zero file size to some cloud services if "Access Denied" error raised when reading the file
- Fixed (Pro): There was no debug log when using Google Photos
- Fixed (Pro): Can now set file dates and times with SFTP WeOnlyDo when Unicode filename
New in SyncBackPro 9.3.29.0 Beta (May 6, 2020)
- New (Pro): Support for S3 compatibility interface to Backblaze B2 (BETA)
New in SyncBackPro 9.3.26.0 Beta (May 4, 2020)
- Updated: The filename sort order is now the same as in Windows File Explorer (Differences, File & Folder Selection and Directory Selection windows)
- Updated (Pro/SE): Client certificate support when using WeOnlyDo FTP with FTPS
- Updated (Pro): Log file now shows total cloud throttling time (if there was throttling)
- Fixed: Log file was not showing total time worker threads waited for work
- Fixed: May fail to reconnect correctly to FTP server when scanning and using WeOnlyDo
- Fixed (Pro): Correctly handle non-default S3 endpoints when using Signature V4
- Fixed (Pro): Files may get uploaded with zero file size to some cloud services if "Access Denied" error raised when reading the file
- Fixed (Pro): There was no debug log when using Google Photos
New in SyncBackPro 9.3.25.0 Beta (Apr 30, 2020)
- Fixed (Pro):
- Files may get uploaded with zero file size to some cloud services if "Access Denied" error raised when reading the file
New in SyncBackPro 9.3.24.0 Beta (Apr 30, 2020)
- Updated: The filename sort order is now the same as in Windows File Explorer (Differences, File & Folder Selection and Directory Selection windows)
- Updated (Pro/SE): Client certificate support when using WeOnlyDo FTP with FTPS
- Updated (Pro): Log file now shows total cloud throttling time (if there was throttling)
- Fixed: Log file was not showing total time worker threads waited for work
- Fixed: May fail to reconnect correctly to FTP server when scanning and using WeOnlyDo
- Fixed (Pro): Correctly handle non-default S3 endpoints when using Signature V4
New in SyncBackPro 9.3.23.0 Beta (Apr 27, 2020)
- Updated: The filename sort order is now the same as in Windows File Explorer (Differences, File & Folder Selection and Directory Selection windows)
- Updated (Pro/SE): Client certificate support when using WeOnlyDo FTP with FTPS
- Updated (Pro): Log file now shows total cloud throttling time (if there was throttling)
- Fixed: Log file was not showing total time worker threads waited for work
- Fixed: May fail to reconnect correctly to FTP server when scanning and using WeOnlyDo
- Fixed (Pro): Correctly handle non-default S3 endpoints when using Signature V4
New in SyncBackPro 9.3.22.0 Beta (Apr 27, 2020)
- Updated: The filename sort order is now the same as in Windows File Explorer (Differences, File & Folder Selection and Directory Selection windows)
- Updated (Pro/SE): Client certificate support when using WeOnlyDo FTP with FTPS
- Updated (Pro): Log file now shows total cloud throttling time (if there was throttling)
- Fixed: Log file was not showing total time worker threads waited for work
- Fixed: May fail to reconnect correctly to FTP server when scanning and using WeOnlyDo
New in SyncBackPro 9.3.21.0 Beta (Apr 24, 2020)
- Updated: Installer updated (Windows Vista and newer required)
New in SyncBackPro 9.3.20.0 Beta (Apr 17, 2020)
- Updated (Pro/SE): Client certificate support when using WeOnlyDo FTP with FTPS
- Updated (Pro): Log file now shows total cloud throttling time (if there was throttling)
- Fixed: Log file was not showing total time worker threads waited for work
New in SyncBackPro 9.3.18.0 Beta (Apr 17, 2020)
- Updated (Pro/SE): Client certificate support when using WeOnlyDo FTP with FTPS
- Updated (Pro): Log file now shows total cloud throttling time (if there was throttling)
- Fixed: Log file was not showing total time worker threads waited for work
New in SyncBackPro 9.3.17.0 (Apr 13, 2020)
- Updated: Improved auto-switching to active mode detection with FTP
- Fixed (SE/Pro): Displaying the wrong error message when trying to connect to SyncBack Touch while outside its home network
- Fixed: Filters were listed twice in HTML log file
- Fixed: V9.3.4.0 introduced a bug where symbolic links were not recognized
- Fixed: Will now disconnect from (Windows) network if configured to do so in some circumstances
- Fixed (Pro): The Metadata Template ID was not set correctly causing upload failures with Dropbox
New in SyncBackPro 9.3.14.0 Beta (Mar 30, 2020)
- Fixed: V9.3.4.0 introduced a bug where symbolic links were not recongized
New in SyncBackPro 9.3.13.0 Beta (Mar 27, 2020)
- Updated: Improved auto-switching to active mode detection with FTP
- Fixed (SE/Pro): Displaying the wrong error message when trying to connect to SyncBack Touch while outside its home network
- Fixed: Filters were listed twice in HTML log file
New in SyncBackPro 9.3.12.0 Beta (Mar 26, 2020)
- Updated: Improved auto-switching to active mode detection with FTP
- Fixed (SE/Pro): Displaying the wrong error message when trying to connect to SyncBack Touch while outside its home network
- Fixed: Filters were listed twice in HTML log file
New in SyncBackPro 9.3.11.0 (Mar 18, 2020)
- New: New variables %CRLF%, %CR% and %LF%
- Updated: New help file compiler version, but no difference should be seen in help file
- Fixed: Use of SITE command with WeOnlyDo FTP was causing unexpected termination of SyncBack
- Fixed: Will now correctly use SITE UTIME to set file modification date and time when using WeOnlyDo FTP
New in SyncBackPro 9.3.10.0 Beta (Mar 17, 2020)
- New: New variables %CRLF%, %CR% and %LF%
- Updated: New help file compiler version, but no difference should be seen in help file
- Fixed: Use of SITE command with WeOnlyDo FTP was causing unexpected termination of SyncBack
- Fixed: Will now correctly use SITE UTIME to set file modification date and time when using WeOnlyDo FTP
New in SyncBackPro 9.3.9.0 Beta (Mar 13, 2020)
- New: New variables %CRLF%, %CR% and %LF%
- Updated: Change in the way WeOnlyDo FTP events happen to see if it fixes random crashes
- Updated: New help file compiler version, but no difference should be seen in help file
New in SyncBackPro 9.3.8.0 Beta (Mar 10, 2020)
- New: New variables %CRLF%, %CR% and %LF%
- Updated: Change in the way WeOnlyDo FTP events happen to see if it fixes random crashes
- Updated: New help file compiler version, but no difference should be seen in help file
New in SyncBackPro 9.3.7.0 Beta (Mar 9, 2020)
- New: New variables %CRLF%, %CR% and %LF%
- Updated: Change in the way WeOnlyDo FTP events happen to see if it fixes random crashes
- Updated: New help file compiler version, but no difference should be seen in help file
New in SyncBackPro 9.3.4.0 (Mar 3, 2020)
- Updated: Full expand of a folder in File and Folder selection window can now be aborted
- Updated: Faster folder expansion in File and Folder selection window
- Updated: Uninstall will remind you of profile and settings backups if you select to uninstall all settings and profiles
- Fixed (Pro): Hash/pound sign (#) can now be used in filenames with WebDAV
- Fixed: Errors when sending email (log) to encrypted mail servers
New in SyncBackPro 9.3.3.0 (Feb 24, 2020)
- Updated: Much faster sorting (and loading) of the Differences window results
- Fixed: When using multi-threaded scanning, and WeOnlyDo FTP engine, it may fail to download or upload files to root folder
- Fixed: When using WeOnlyDo FTP, the create date and time may be wrong
- Fixed (Pro): Error message displayed when switching from FTP to SFTP and already have a key file selected
- Fixed: History->Detailed list blank if monitor DPI over 100% and default columns not used
- Fixed: Debug flushing setting not saved on Technical Support Wizard
- Fixed: SSL/TLS error when sending email
New in SyncBackPro 9.3.2.0 (Feb 24, 2020)
- Updated: Much faster sorting (and loading) of the Differences window results
- Fixed: When using multi-threaded scanning, and WeOnlyDo FTP engine, it may fail to download or upload files to root folder
- Fixed: When using WeOnlyDo FTP, the create date and time may be wrong
- Fixed (Pro): Error message displayed when switching from FTP to SFTP and already have a key file selected
- Fixed: History->Detailed list blank if monitor DPI over 100% and default columns not used
- Fixed: Debug flushing setting not saved on Technical Support Wizard
New in SyncBackPro 9.2.43.0 Beta (Feb 14, 2020)
- Fixed: History->Detailed list blank if monitor DPI over 100% and default columns not used
- Fixed: Debug flushing setting not saved on Technical Support Wizard
New in SyncBackPro 9.2.42.0 Beta (Feb 14, 2020)
- Fixed: When using multi-threaded scanning, and WeOnlyDo FTP engine, it may fail to download or upload files to root folder
- Fixed (Pro): Error message displayed when switchinf from FTP to SFTP and already have a key file selected
New in SyncBackPro 9.2.39.0 (Feb 11, 2020)
- Fixed: WeOnlyDo FTP manifest change was causing issues, reverted back.
New in SyncBackPro 9.2.38.0 Beta (Feb 10, 2020)
- Updated: Support for OAUTH2 with cloud-based Office 365 email
- Updated: WeOnlyDo FTP details added to manifest file so DLL registration not required (useful for No Install version)
- Updated (Pro): Change in OneDrive/SharePoint API, not to try to commit the large file upload manually if it fails on the first fragment
- Updated (Pro): Egnyte using TLS 1.2 at a minimum. Is a requirement of the cloud service from March 2020 onwards.
- Fixed: When restoring multi-zip files from FTP (and not using WeOnlyDo) then it may fail to restore some files
- Fixed (Pro/SE): 64-bit installer was installing WeOnlyDo DLL's to a sub-folder
- Fixed (Pro/SE): Can now access WSL shares on Windows 10
New in SyncBackPro 9.2.37.0 Beta (Feb 3, 2020)
- Fixed (Pro/SE): 64-bit installer was installing WeOnlyDo DLL's to a sub-folder
New in SyncBackPro 9.2.36.0 Beta (Feb 2, 2020)
- Updated: Support for OAUTH2 with cloud-based Office 365 email
- Updated: WeOnlyDo FTP details added to manifest file so DLL registration not required (useful for No Install version)
- Updated: Change in OneDrive/SharePoint API, not to try to commit the large file upload manually if it fails on the first fragment
- Updated: Egnyte using TLS 1.2 at a minimum. Is a requirement of the cloud service from March 2020 onwards.
- Fixed: When restoring multi-zip files from FTP (and not using WeOnlyDo) then it may fail to restore some files
New in SyncBackPro 9.2.33.0 Beta (Jan 24, 2020)
- Updated: Egnyte using TLS 1.2 at a minimum. It is a requirement of the cloud service from March 2020 onwards.
New in SyncBackPro 9.2.32.0 Beta (Jan 22, 2020)
- Updated: Support for OAUTH2 with cloud-based Office 365 email
- Updated: WeOnlyDo FTP details added to manifest file so DLL registration not required (useful for No Install version)
- Updated: Change in OneDrive/SharePoint API, not to try to commit the large file upload manually if it fails on the first fragment
- Fixed: When restoring multi-zip files from FTP (and not using WeOnlyDo) then it may fail to restore some files
New in SyncBackPro 9.2.29.0 Beta (Jan 3, 2020)
- Fixed (Pro): When uploading single Zip to Google Drive, the delete to trash setting is now respected
New in SyncBackPro 9.2.28.0 Beta (Jan 2, 2020)
- Fixed: Selections no longer lost when using SHIFT and UP/DOWN keys
New in SyncBackPro 9.2.27.0 Beta (Dec 30, 2019)
- Fixed: Now reconnects to FTP correctly when no transfer time limit exceeded
New in SyncBackPro 9.2.26.0 Beta (Dec 20, 2019)
- Fixed (Pro): Can get stuck in a loop when getting an error uploading to WebDAV
New in SyncBackPro 9.2.25.0 Beta (Dec 19, 2019)
- Fixed: When changing filter type from default was prompted each time filter window opened
New in SyncBackPro 9.2.24.0 Beta (Dec 17, 2019)
- Fixed (Pro): Source file attributes lost if large number of files
New in SyncBackPro 9.2.22.0 Beta (Dec 11, 2019)
- Fixed: Windows positions when taskbar is on left or top of screen
- Fixed: You can now rename a profile to the same name but with different case
- Fixed: RMDA FTP command fails when directory to delete is the base directory
- Fixed (Pro/SE): When using parallel compression or cloud transfers, in rare cases it may fail to end the profile
- Fixed (Pro): Failed to download empty files from OneDrive
- Fixed (Pro): Now able to get symbolic link target details with WeOnlyDo SFTP
New in SyncBackPro 9.2.20.0 Beta (Dec 10, 2019)
- Updated (Pro): Better OneDrive throttling handling when an error occurs during fragmented upload
- Updated: Network profile settings tab now always visible
- Updated: Profile remembers what the destination was previously so can revert back to it in future via profile config
- Updated: Default FTP engine is now WeOnlyDo for FTP, FTPS and SFTP
- Updated: Using newer compiler (Delphi 10.3.3)
New in SyncBackPro 9.2.19.0 Beta (Dec 5, 2019)
- Fixed (SE): The 64-bit No Install release had the wrong non-admin manifest file
- Fixed (Pro/SE): When using parallel compression or cloud transfers, in rare cases it may fail to end the profile
- Fixed (Pro): Failed to download empty files from OneDrive
New in SyncBackPro 9.2.17.0 Beta (Dec 2, 2019)
- Fixed: RMDA FTP command fails when directory to delete is the base directory
New in SyncBackPro 9.2.16.0 Beta (Nov 29, 2019)
- New (Pro/SE): Profiles set to run periodically or when files are changed can now be added to the queue instead of being run immediately
- Updated (Pro): TLS 1.2 is now always used with Box
- Updated: The option of what to do when all profiles end is now saved
- Updated (Pro): In the New Profile Wizard there is an add button to manually add a cloud bucket
- Updated (Pro/SE): SSL connections are re-used with FTPS when using Eldos FTP engine (already does this with WeOnlyDo)
- Fixed: Windows positions when taskbar is on left or top of screen
- Fixed: You can now rename a profile to the same name but with different case
- Fixed (SE): The 64-bit No Install release had the wrong non-admin manifest file
- Fixed (Pro/SE): When using parallel compression or cloud transfers, in rare cases it may fail to end the profile
New in SyncBackPro 9.2.12.0 (Nov 11, 2019)
- New (Pro): Can mute Dropbox desktop app notifications on file uploads
- New (Pro): Added option to skip OneNote files or not (default is to skip them)
- New (Pro): Can automatically purge native file versions on OneDrive Business, Sharepoint and Google Drive
- New: Hot-tracking option in Preferences (for main window, tree explorer and differences window)
- Updated (Free): Profile list is automatically refreshed when restoring from minimized
- Updated (SE/Pro): Provides link to KB article on 450 TLS session of data connection errors when using SmartFTP FTP engine
- Updated (SE/Pro): Improved performance when using SyncBack Monitor
- Fixed: Left tab width in profile configuration remembered
- Fixed (Pro): May ignore failures getting metadata from some cloud services
- Fixed (Pro): With WebDAV, fails to find sub-folders with the same name as their parent folder
- Fixed (Pro): OneDrive Business endpoint parser
- Fixed (Pro): Backup read fallback method was not being used with Dropbox and WebDAV
- Fixed: Run menu from profiles pop-up always ran attended
- Fixed: Scrolled to top after last profile finished
- Fixed (Pro): When using multi-threaded transfers the profile may terminate unexpectedly
- Fixed (SE/Free): WeOnlyDo and Eldos FTP engines not working
New in SyncBackPro 9.2.9.0 Beta (Nov 7, 2019)
- Fixed: Run menu from profiles pop-up always ran attended
- Fixed: Scrolled to top after last profile finished
- Fixed (Pro): When using multi-threaded transfers the profile may terminate unexpectedly
New in SyncBackPro 9.2.3.0 Beta (Oct 31, 2019)
- New (Pro): Can mute Dropbox desktop app notifications on file uploads
- New (Pro): Added option to skip OneNote files or not (default is to skip them)
- New (Pro): Can automatically purge native file versions on OneDrive Business, Sharepoint and Google Drive
- Updated (Free): Profile list is automatically refreshed when restoring from minimized
- Fixed: Left tab width in profile configuration remembered
- Fixed (Pro): May ignore failures getting metadata from some cloud services
- Fixed (Pro): With WebDAV, fails to find sub-folders with the same name as their parent folder
- Fixed (Pro): OneDrive Business endpoint parser
- Fixed (Pro): Backup read fallback method was not being used with Dropbox and WebDAV
New in SyncBackPro 9.2.1.0 Beta (Oct 25, 2019)
- Fixed (Pro): With WebDAV, fails to find sub-folders with the same name as their parent folder
New in SyncBackPro 9.2.0.0 Beta (Oct 16, 2019)
- New (Pro): Can mute Dropbox desktop app notifications on file uploads
- New (Pro): Added option to skip OneNote files or not (default is to skip them)
- New (Pro): Can automatically purge native file versions on OneDrive Business, Sharepoint and Google Drive
- Updated (Free): Profile list is automatically refreshed when restoring from minimized
- Fixed: Left tab width in profile configuration remembered
- Fixed (Pro): May ignore failures getting metadata from some cloud services
New in SyncBackPro 9.1.13.0 Beta (Oct 11, 2019)
- Updated (Pro): Added option to skip OneNote files or not (default is to skip them)
- Updated (Free): Profile list is automatically refreshed when restoring from minimized
- Fixed: Left tab width in profile configuration remembered
- Fixed (Pro): May ignore failures getting metadata from some cloud services
New in SyncBackPro 9.1.12.0 (Oct 7, 2019)
- New (Pro): Google Photos (BETA)
- New (Pro): Can now choose Dropbox Teams root folder instead of users home folder (Dropbox Business)
- Updated: Files with temporary attribute are no longer ignored by default
- Updated: When searching for files, or getting a list of files, on a drive or network share, it will retry when it can
- Updated (Pro): SHA-256 used for File Integrity with FTP servers that support it and if FTP engine supports it
- Updated (Pro): Can select and upload multiple profiles to SBMS service
- Updated (Pro): Changes in S3 for better V4 signing support in Wasabi, plus support for Wasabi regions
- Fixed (SE/Pro): Could not change number of threads to use for multi-threaded copy
- Fixed (SE/Pro): Getting hash values of files on some non-standard FTP servers when using wodFTP FTP engine
- Fixed: When uploading a file to FTP, and safe copy is used, the existing file permissions are retained (if the FTP server supports CHMOD extension)
- Fixed: The wodFTP FTP engine did not get file permissions on UNIX systems
- Fixed: Can now unlink GMail OAUTH if it was being used in a profile
- Fixed (Pro): Was setting meta-data on folders to indicate they were files
- Fixed (Pro): When using worker threads then may have failed to delete old Backblaze B2 file versions
- Fixed (Pro): May ignore failures getting metadata from S3 and compatible services
- Fixed (Pro): Unhandled exception when choosing WebDAV folder and connection details were invalid
New in SyncBackPro 9.0.9.14 (Aug 28, 2019)
- New: HTML log will show hits on filters (if default DOS filters are used)
- Updated: Installer updated, modern interface and prompts, better DPI scaling, splash image no longer displayed
- Updated: The installer and SyncBack executable will no longer run on Windows XP or Windows 2003 (which are not supported). V9.0.8.15 was the last version that can be installed and run on XP/2003.
- Updated: Changed method to detect if a window is off-screen
- Updated (Pro): Better progress feedback when getting file listings
- Updated (Pro): Supports Amazon S3 in China
- Updated: The default (DOS) filters are much faster
- Updated (Pro): Rackspace/Openstack segments now go in a separate folder
- Updated (Pro): Rackspace/Openstack segment sizes changed from 10MB to 50MB
- Updated (Pro): OneDrive API now downloads files in parts to get around expired tokens issue
- Updated (Pro): Amazon Cloud Drive no longer available (Amazon has stopped 3rd party access)
- Updated: Gmail OAUTH2 authentication removed
- Fixed (Pro): Automatically retries Backblaze B2 file download if data received is corrupt
- Fixed (Pro): Could use more than maximum number of allowed parts for file uploads (Rackspace/Openstack)
- Fixed (Pro): For Google Drive the file creation date and time is used if file has invalid last modification date and time
- Fixed: For some multi-monitor configurations the window positions were restored wrongly
New in SyncBackPro 9.0.9.12 Beta (Aug 27, 2019)
- New: HTML log will show hits on filters (if default DOS filters are used)
- Updated: Installer updated, modern interface and prompts, better DPI scaling, splash image no longer displayed
- Updated: The installer and SyncBack executable will no longer run on Windows XP or Windows 2003 (which are not supported). V9.0.8.15 was the last version that can be installed and run on XP/2003.
- Updated: Changed method to detect if a window is off-screen
- Updated (Pro): Better progress feedback when getting file listings
- Updated (Pro): Supports Amazon S3 in China
- Updated: The default (DOS) filters are much faster
- Updated (Pro): Rackspace/Openstack segments now go in a separate folder
- Updated (Pro): Rackspace/Openstack segment sizes changed from 10MB to 50MB
- Updated (Pro): OneDrive API now downloads files in parts to get around expired tokens issue
- Updated (Pro): Amazon Cloud Drive no longer available (Amazon has stopped 3rd party access)
- Updated: Gmail OAUTH2 authentication removed
- Fixed (Pro): Automatically retries Backblaze B2 file download if data received is corrupt
- Fixed (Pro): Could use more than maximum number of allowed parts for file uploads (Rackspace/Openstack)
- Fixed (Pro): For Google Drive the file creation date and time is used if file has invalid last modification date and time
- Fixed: For some multi-monitor configurations the window positions were restored wrongly
New in SyncBackPro 9.0.9.3 Beta (Aug 7, 2019)
- Updated: Installer updated, modern interface and prompts, better DPI scaling, splash image no longer displayed
- Updated: Installer no longer runs on Windows XP or Windows 2003 (which are not supported). V9.0.8.15 is the last version that can be installed on XP/2003.
- Updated: Windows XP and 2003 compatibility completely removed
- Updated (Pro): Better progress feedback when getting file listings
- Fixed (Pro): Automatically retries Backblaze B2 file download if data received is corrupted
- Fixed (Pro): Could use more than maximum number of allowed parts for file uploads (Rackspace/Openstack)
New in SyncBackPro 9.0.8.15 (Jul 31, 2019)
- New: Can set schedule to shutdown, reboot, etc. once profiles finish
- New: For passive connections, always use the servers IP address setting for FTP
- New (Free): Profiles can now be password protected from modification and deletion
- Updated (Pro): Can now use Glacier and Deep Archive storage class for Amazon S3
- Updated: On schedule form can now press OK on Settings page
- Updated: Portuguese (Brazilian) translations
- Updated: Hungarian translations
- Updated (Pro): The received date and time of emails can be changed when doing an email backup
- Fixed: Run history is not copied with a profile
- Fixed: Folders in task scheduler are not created unless a schedule is created
- Fixed (Pro): If there are approx. over 175,000 files on the Differences window, it may wrongly show that they have versions
- Fixed: On Differences window when selecting files with Shift-Up and Shift-Down it now updates display immediately
- Fixed (SE/Pro): Does not fail to scan files when receiving invalid dates from SyncBack Touch
- Fixed (SE/Pro): Sometimes crashing when using Pushover
- Fixed: When using WeOnlyDo FTP engine it may crash if debugging is not enabled
- Fixed: The mini-progress bar in the profile list was not updating
- Fixed: Time edit controls are now 24-hour without the spin buttons
- Fixed: The Add and Remove buttons were not visible on the Compression -> Compressed profile settings page
- Fixed (Pro): Egnyte timestamps were ignored if no metadata available
- Fixed: When Ctrl-Alt-Del pressed then SyncBack was asking to delete the selected profile(s)
New in SyncBackPro 9.0.8.7 Beta (Jul 12, 2019)
- New: Can set schedule to shutdown, reboot, etc. once profiles finish
- Updated: On schedule form can now press OK on Settings page
- Updated: Portuguese (Brazilian) translations
- Updated: Hungarian translations
- Fixed: Run history is not copied with a profile
- Fixed: Folders in task scheduler are not created unless a schedule is created
- Fixed (Pro): If there are approx. over 175,000 files on the Differences window, it may wrongly show that they have versions
- Fixed: On Differences window when selecting files with Shift-Up and Shift-Down it now updates display immediately
- Fixed (SE/Pro): Does not fail to scan files when receiving invalid dates from SyncBack Touch
- Fixed (SE/Pro): Sometimes crashing when using Pushover
- Fixed: When using WeOnlyDo FTP engine it may crash if debugging is not enabled
- Fixed: The mini-progress bar in the profile list was not updating
- Fixed: Time edit controls are now 24-hour without the spin buttons
New in SyncBackPro 9.0.4.1 (Jun 7, 2019)
- New: Completely new modern and clean user interface with an optional dark mode. All the graphics have been changed. Care has been taken to simplify and modernize the interface but keeping it familiar to users of older versions.
- New: Per-monitor DPI scaling, so windows are scaled depending on the monitor they are on
- New: The default font is now larger, and the same font as used in Windows 10 (Segoe UI 10 point)
- New: The log file has been modernized and improved to make it clearer. The HTML log file now includes embedded graphics. More summary detail also provided. It also now shows the total time a profile was paused.
- New: In the Tree Explorer window, you can now include/exclude files/folders without needing to first expand the folder In the Tree Explorer window, you can now include/exclude files/folders and apply to all sub-folders
- New: The File & Folder Selection window, Differences window and File Prompt window now shows the source on the left when the profile is a backup/mirror from FTP, cloud, etc. to a local drive
- New: New simplified Restore wizard. Includes option not to move files on restore and other options.
- New: In the main window you can filter based on the profile name
- New: In File & Folder selections, you can export and import the selections
- New: When profiles finish, SyncBack can now automatically exit, reboot or logout instead of just shutting down
- New: The File & Folder selections window now has last modified column
- New: Non-critical errors have been removed and are now warnings
- New: You can now list all the shared settings, which profiles are using them (if any) and delete the unused ones
- New: You can now skip a SyncBack new version. For example, if you are on v9.0 and v9.1 is available then you can ignore the new version. If a version is ignored, you will not be prompted again until a newer version, e.g. V9.2, is available. However, if you do a manual update check then it will always tell you a newer version is available.
- New (SE/Pro): Delta-copy versioning when copying files from one file system to another. Only the changes between files are stored, which greatly reduces disk space for large files such as virtual machines, databases, etc.
- New (Pro): OVH cloud support added
- New (Pro): hubiC cloud support added
- New (Pro): WebDAV support added
- New (Pro): Egnyte support added
- New (Pro): Supports restoring files archived in Azure
- New (Pro): S3 Storage Class and new Azure Blob Tier. Previously could only set S3 Storage class, but now can do it with Azure.
- New (Pro): Supports One Zone-Infrequent Access and Intelligent Tiering storage classes on Amazon S3
- New (Pro): Can now use Service Account Private Key files with Google Storage
- New (SE/Pro): Can use Bing speech, so native language speech supported
- New (SE/Pro): Two new FTP/FTPS engines and one new SFTP engine added for improved FTP server compatibility
- New (SE/Pro): Supports new faster scanning method in CompleteFTP (requires V12.1.0 or newer)
- New (SE/Pro): FTP support improved (MFF, RMDA and AVBL supported). Tested again with FTP servers to improve performance and compatibility.
- New (SE/Pro): FTP time zone setting improved (if you use ! as first character then it overrides what the FTP server reports, e.g. !-480)
- New (SE/Pro): Can restore from multi-zip files copied from an FTP server to a local drive
- New (SE/Pro): Delta-copy (over the network) upload and download to SyncBack Touch (Windows only)
- New (SE/Pro): Can shutdown remote Touch server (Android only, must be V1.3.11 or newer of Touch)
- New (SE/Pro): Better user feedback when searching for SyncBack Touch devices
- New (SE/Pro): A new Android, SyncBack Monitor, application which you can use to stop, start, pause and resume profiles running on your computer (on the same local network)
- New (SE/Pro): Parallel file multi-zip (when copying to or from internal/external drive, network share, etc.)
- New (SE/Pro): Parallel local file deletes (internal/external drive, network share, etc.)
- New (Pro): Parallel cloud file uploads and downloads: S3, Azure, Egnyte, Backblaze B2, Rackspace/OpenStack and Google Storage (if using private key)
- New (SE/Pro): Profile backups are now much faster
- New: In a profile schedule you can now view/set run time limit
- New: In a profile schedule you can now decide what to do if scheduled task is already running
- New: When creating new schedules, the default is not to run the schedule again if it is already running. In V8 it would run it in parallel, which can cause issues as the same profile cannot be run in parallel.
- New (SE/Pro): Files the user does not have read access rights to can now be copied to the cloud, FTP, FTPS, SFTP, Touch and MTP. Also, files copied from the cloud can replace local files the user does not have write access rights to.
- New (Pro): SMART checks also check the drive health. Extra detailed information about the drive is logged.
- New (SE/Pro): Option to skip temporary files (enabled by default)
- New (SE/Pro): Can choose to version deleted and replaced files, only replaced files or only deleted files
- New: Now works with Sandboxie
- Updated (Pro): Uses new Azure REST API, so can upload larger files (4.75 TB)
- Updated (Pro): Dropbox API updated
- Updated (Pro): Backblaze B2 API updated
- Updated: The Zip option "Try and compress files that are being used" has been replaced by the Copy/Delete option "When copying files, stop other processes from modifying them during the copy". This is TRUE by default. It applies to any local copy, i.e. Zip, Cloud, MTP and Touch.
- Updated (Pro): When using SecureZip, can add files with filename lengths over 260 characters. The maximum filename length of the Zip file itself is still limited to 260 characters.
- Updated: When a profile is queued, the visual group it is in (if it is in one) is now used. This helps with profile variables, for example
New in SyncBackPro 9.0.1.1 (Jun 2, 2019)
- SyncBack Monitor first released.
- New: Completely new modern and clean user interface with an optional dark mode. All the graphics have been changed. Care has been taken to simplify and modernize the interface but keeping it familiar to users of older versions.
- New: Per-monitor DPI scaling, so windows are scaled depending on the monitor they are on
- New: The default font is now larger, and the same font as used in Windows 10 (Segoe UI 10 point)
- New: The log file has been modernized and improved to make it clearer. The HTML log file now includes embedded graphics. More summary detail also provided. It also now shows the total time a profile was paused.
- New: In the Tree Explorer window, you can now include/exclude files/folders without needing to first expand the folder In the Tree Explorer window, you can now include/exclude files/folders and apply to all sub-folders
- New: The File & Folder Selection window, Differences window and File Prompt window now shows the source on the left when the profile is a backup/mirror from FTP, cloud, etc. to a local drive
- New: New simplified Restore wizard. Includes option not to move files on restore and other options.
- New: In the main window you can filter based on the profile name
- New: In File & Folder selections, you can export and import the selections
- New: When profiles finish, SyncBack can now automatically exit, reboot or logout instead of just shutting down
- New: The File & Folder selections window now has last modified column
- New: Non-critical errors have been removed and are now warnings
- New: You can now list all the shared settings, which profiles are using them (if any) and delete the unused ones
- New: You can now skip a SyncBack new version. For example, if you are on v9.0 and v9.1 is available then you can ignore the new version. If a version is ignored, you will not be prompted again until a newer version, e.g. V9.2, is available. However, if you do a manual update check then it will always tell you a newer version is available.
- New (SE/Pro): Delta-copy versioning when copying files from one file system to another. Only the changes between files are stored, which greatly reduces disk space for large files such as virtual machines, databases, etc.
- New (Pro): OVH cloud support added
- New (Pro): hubiC cloud support added
- New (Pro): WebDAV support added
- New (Pro): Egnyte support added
- New (Pro): Supports restoring files archived in Azure
- New (Pro): S3 Storage Class and new Azure Blob Tier. Previously could only set S3 Storage class, but now can do it with Azure.
- New (Pro): Supports One Zone-Infrequent Access and Intelligent Tiering storage classes on Amazon S3
- New (Pro): Can now use Service Account Private Key files with Google Storage
- New (SE/Pro): Can use Bing speech, so native language speech supported
- New (SE/Pro): Two new FTP/FTPS engines and one new SFTP engine added for improved FTP server compatibility
- New (SE/Pro): Supports new faster scanning method in CompleteFTP (requires V12.1.0 or newer)
- New (SE/Pro): FTP support improved (MFF, RMDA and AVBL supported). Tested again with FTP servers to improve performance and compatibility.
- New (SE/Pro): FTP time zone setting improved (if you use ! as first character then it overrides what the FTP server reports, e.g. !-480)
- New (SE/Pro): Can restore from multi-zip files copied from an FTP server to a local drive
- New (SE/Pro): Delta-copy (over the network) upload and download to SyncBack Touch (Windows only)
- New (SE/Pro): Can shutdown remote Touch server (Android only, must be V1.3.11 or newer of Touch)
- New (SE/Pro): Better user feedback when searching for SyncBack Touch devices
- New (SE/Pro): A new Android, SyncBack Monitor, application which you can use to stop, start, pause and resume profiles running on your computer (on the same local network)
- New (SE/Pro): Parallel file multi-zip (when copying to or from internal/external drive, network share, etc.)
- New (SE/Pro): Parallel local file deletes (internal/external drive, network share, etc.)
- New (Pro): Parallel cloud file uploads and downloads: S3, Azure, Egnyte, Backblaze B2, Rackspace/OpenStack and Google Storage (if using private key)
- New (SE/Pro): Profile backups are now much faster
- New: In a profile schedule you can now view/set run time limit
- New: In a profile schedule you can now decide what to do if scheduled task is already running
- New: When creating new schedules, the default is not to run the schedule again if it is already running. In V8 it would run it in parallel, which can cause issues as the same profile cannot be run in parallel.
- New (SE/Pro): Files the user does not have read access rights to can now be copied to the cloud, FTP, FTPS, SFTP, Touch and MTP. Also, files copied from the cloud can replace local files the user does not have write access rights to.
- New (Pro): SMART checks also check the drive health. Extra detailed information about the drive is logged.
- New (SE/Pro): Option to skip temporary files (enabled by default)
- New (SE/Pro): Can choose to version deleted and replaced files, only replaced files or only deleted files
- New: Now works with Sandboxie
- Updated (Pro): Uses new Azure REST API, so can upload larger files (4.75 TB)
- Updated (Pro): Dropbox API updated
- Updated (Pro): Backblaze B2 API updated
- Updated: The Zip option "Try and compress files that are being used" has been replaced by the Copy/Delete option "When copying files, stop other processes from modifying them during the copy". This is TRUE by default. It applies to any local copy, i.e. Zip, Cloud, MTP and Touch.
- Updated (Pro): When using SecureZip, can add files with filename lengths over 260 characters. The maximum filename length of the Zip file itself is still limited to 260 characters.
- Updated: When a profile is queued, the visual group it is in (if it is in one) is now used. This helps with profile variables, for example
New in SyncBackPro 9.0.0.41 (May 31, 2019)
- New: Completely new modern and clean user interface with an optional dark mode. All the graphics have been changed. Care has been taken to simplify and modernize the interface but keeping it familiar to users of older versions.
- New: Per-monitor DPI scaling, so windows are scaled depending on the monitor they are on
- New: The default font is now larger, and the same font as used in Windows 10 (Segoe UI 10 point)
- New: The log file has been modernized and improved to make it clearer. The HTML log file now includes embedded graphics. More summary detail also provided. It also now shows the total time a profile was paused.
- New: In the Tree Explorer window, you can now include/exclude files/folders without needing to first expand the folder In the Tree Explorer window, you can now include/exclude files/folders and apply to all sub-folders
- New: The File & Folder Selection window, Differences window and File Prompt window now shows the source on the left when the profile is a backup/mirror from FTP, cloud, etc. to a local drive
- New: New simplified Restore wizard. Includes option not to move files on restore and other options.
- New: In the main window you can filter based on the profile name
- New: In File & Folder selections, you can export and import the selections
- New: When profiles finish, SyncBack can now automatically exit, reboot or logout instead of just shutting down
- New: The File & Folder selections window now has last modified column
- New: Non-critical errors have been removed and are now warnings
- New: You can now list all the shared settings, which profiles are using them (if any) and delete the unused ones
- New: You can now skip a SyncBack new version. For example, if you are on v9.0 and v9.1 is available then you can ignore the new version. If a version is ignored, you will not be prompted again until a newer version, e.g. V9.2, is available. However, if you do a manual update check then it will always tell you a newer version is available.
- New (SE/Pro): Delta-copy versioning when copying files from one file system to another. Only the changes between files are stored, which greatly reduces disk space for large files such as virtual machines, databases, etc.
- New (Pro): OVH cloud support added
- New (Pro): hubiC cloud support added
- New (Pro): WebDAV support added
- New (Pro): Egnyte support added
- New (Pro): Supports restoring files archived in Azure
- New (Pro): S3 Storage Class and new Azure Blob Tier. Previously could only set S3 Storage class, but now can do it with Azure.
- New (Pro): Supports One Zone-Infrequent Access and Intelligent Tiering storage classes on Amazon S3
- New (Pro): Can now use Service Account Private Key files with Google Storage
- New (SE/Pro): Can use Bing speech, so native language speech supported
- New (SE/Pro): Two new FTP/FTPS engines and one new SFTP engine added for improved FTP server compatibility
- New (SE/Pro): Supports new faster scanning method in CompleteFTP (requires V12.1.0 or newer)
- New (SE/Pro): FTP support improved (MFF, RMDA and AVBL supported). Tested again with FTP servers to improve performance and compatibility.
- New (SE/Pro): FTP time zone setting improved (if you use ! as first character then it overrides what the FTP server reports, e.g. !-480)
- New (SE/Pro): Can restore from multi-zip files copied from an FTP server to a local drive
- New (SE/Pro): Delta-copy (over the network) upload and download to SyncBack Touch (Windows only)
- New (SE/Pro): Can shutdown remote Touch server (Android only, must be V1.3.11 or newer of Touch)
- New (SE/Pro): Better user feedback when searching for SyncBack Touch devices
- New (SE/Pro): A new Android, SyncBack Monitor, application which you can use to stop, start, pause and resume profiles running on your computer (on the same local network)
- New (SE/Pro): Parallel file multi-zip (when copying to or from internal/external drive, network share, etc.)
- New (SE/Pro): Parallel local file deletes (internal/external drive, network share, etc.)
- New (Pro): Parallel cloud file uploads and downloads: S3, Azure, Egnyte, Backblaze B2, Rackspace/OpenStack and Google Storage (if using private key)
- New (SE/Pro): Profile backups are now much faster
- New: In a profile schedule you can now view/set run time limit
- New: In a profile schedule you can now decide what to do if scheduled task is already running
- New: When creating new schedules, the default is not to run the schedule again if it is already running. In V8 it would run it in parallel, which can cause issues as the same profile cannot be run in parallel.
- New (SE/Pro): Files the user does not have read access rights to can now be copied to the cloud, FTP, FTPS, SFTP, Touch and MTP. Also, files copied from the cloud can replace local files the user does not have write access rights to.
- New (Pro): SMART checks also check the drive health. Extra detailed information about the drive is logged.
- New (SE/Pro): Option to skip temporary files (enabled by default)
- New (SE/Pro): Can choose to version deleted and replaced files, only replaced files or only deleted files
- New: Now works with Sandboxie
- Updated (Pro): Uses new Azure REST API, so can upload larger files (4.75 TB)
- Updated (Pro): Dropbox API updated
- Updated (Pro): Backblaze B2 API updated
- Updated: The Zip option "Try and compress files that are being used" has been replaced by the Copy/Delete option "When copying files, stop other processes from modifying them during the copy". This is TRUE by default. It applies to any local copy, i.e. Zip, Cloud, MTP and Touch.
- Updated (Pro): When using SecureZip, can add files with filename lengths over 260 characters. The maximum filename length of the Zip file itself is still limited to 260 characters.
- Updated: When a profile is queued, the visual group it is in (if it is in one) is now used. This helps with profile variables, for example
New in SyncBackPro 9.0.0.40 (May 31, 2019)
- New: Completely new modern and clean user interface with an optional dark mode. All the graphics have been changed. Care has been taken to simplify and modernize the interface but keeping it familiar to users of older versions.
- New: Per-monitor DPI scaling, so windows are scaled depending on the monitor they are on
- New: The default font is now larger, and the same font as used in Windows 10 (Segoe UI 10 point)
- New: The log file has been modernized and improved to make it clearer. The HTML log file now includes embedded graphics. More summary detail also provided. It also now shows the total time a profile was paused.
- New: In the Tree Explorer window, you can now include/exclude files/folders without needing to first expand the folder In the Tree Explorer window, you can now include/exclude files/folders and apply to all sub-folders
- New: The File & Folder Selection window, Differences window and File Prompt window now shows the source on the left when the profile is a backup/mirror from FTP, cloud, etc. to a local drive
- New: New simplified Restore wizard. Includes option not to move files on restore and other options.
- New: In the main window you can filter based on the profile name
- New: In File & Folder selections, you can export and import the selections
- New: When profiles finish, SyncBack can now automatically exit, reboot or logout instead of just shutting down
- New: The File & Folder selections window now has last modified column
- New: Non-critical errors have been removed and are now warnings
- New: You can now list all the shared settings, which profiles are using them (if any) and delete the unused ones
- New: You can now skip a SyncBack new version. For example, if you are on v9.0 and v9.1 is available then you can ignore the new version. If a version is ignored, you will not be prompted again until a newer version, e.g. V9.2, is available. However, if you do a manual update check then it will always tell you a newer version is available.
- New (SE/Pro): Delta-copy versioning when copying files from one file system to another. Only the changes between files are stored, which greatly reduces disk space for large files such as virtual machines, databases, etc.
- New (Pro): OVH cloud support added
- New (Pro): hubiC cloud support added
- New (Pro): WebDAV support added
- New (Pro): Egnyte support added
- New (Pro): Supports restoring files archived in Azure
- New (Pro): S3 Storage Class and new Azure Blob Tier. Previously could only set S3 Storage class, but now can do it with Azure.
- New (Pro): Supports One Zone-Infrequent Access and Intelligent Tiering storage classes on Amazon S3
- New (Pro): Can now use Service Account Private Key files with Google Storage
- New (SE/Pro): Can use Bing speech, so native language speech supported
- New (SE/Pro): Two new FTP/FTPS engines and one new SFTP engine added for improved FTP server compatibility
- New (SE/Pro): Supports new faster scanning method in CompleteFTP (requires V12.1.0 or newer)
- New (SE/Pro): FTP support improved (MFF, RMDA and AVBL supported). Tested again with FTP servers to improve performance and compatibility.
- New (SE/Pro): FTP time zone setting improved (if you use ! as first character then it overrides what the FTP server reports, e.g. !-480)
- New (SE/Pro): Can restore from multi-zip files copied from an FTP server to a local drive
- New (SE/Pro): Delta-copy (over the network) upload and download to SyncBack Touch (Windows only)
- New (SE/Pro): Can shutdown remote Touch server (Android only, must be V1.3.11 or newer of Touch)
- New (SE/Pro): Better user feedback when searching for SyncBack Touch devices
- New (SE/Pro): A new Android, SyncBack Monitor, application which you can use to stop, start, pause and resume profiles running on your computer (on the same local network)
- New (SE/Pro): Parallel file multi-zip (when copying to or from internal/external drive, network share, etc.)
- New (SE/Pro): Parallel local file deletes (internal/external drive, network share, etc.)
- New (Pro): Parallel cloud file uploads and downloads: S3, Azure, Egnyte, Backblaze B2, Rackspace/OpenStack and Google Storage (if using private key)
- New (SE/Pro): Profile backups are now much faster
- New: In a profile schedule you can now view/set run time limit
- New: In a profile schedule you can now decide what to do if scheduled task is already running
- New: When creating new schedules, the default is not to run the schedule again if it is already running. In V8 it would run it in parallel, which can cause issues as the same profile cannot be run in parallel.
- New (SE/Pro): Files the user does not have read access rights to can now be copied to the cloud, FTP, FTPS, SFTP, Touch and MTP. Also, files copied from the cloud can replace local files the user does not have write access rights to.
- New (Pro): SMART checks also check the drive health. Extra detailed information about the drive is logged.
- New (SE/Pro): Option to skip temporary files (enabled by default)
- New (SE/Pro): Can choose to version deleted and replaced files, only replaced files or only deleted files
- New: Now works with Sandboxie
- Updated (Pro): Uses new Azure REST API, so can upload larger files (4.75 TB)
- Updated (Pro): Dropbox API updated
- Updated (Pro): Backblaze B2 API updated
- Updated: The Zip option "Try and compress files that are being used" has been replaced by the Copy/Delete option "When copying files, stop other processes from modifying them during the copy". This is TRUE by default. It applies to any local copy, i.e. Zip, Cloud, MTP and Touch.
- Updated (Pro): When using SecureZip, can add files with filename lengths over 260 characters. The maximum filename length of the Zip file itself is still limited to 260 characters.
- Updated: When a profile is queued, the visual group it is in (if it is in one) is now used. This helps with profile variables, for example
New in SyncBackPro 8.6.6.3 (Apr 22, 2019)
- Fixed: In rare cases a file may not be deleted from the cloud
- Fixed: Unicode filename problem with Dropbox
New in SyncBackPro 8.6.3.0 (Apr 10, 2019)
- Fixed: Do not copy offline files
- Fixed: Shared settings were saved even when cancelling profile modification
- Fixed: Runtime error 231 when renaming a file on an FTP server
- Fixed: When selecting email service the email settings available may not update correctly
- Fixed (Pro): Multi-threaded scanning of cloud when using multi-zip
- Fixed (Pro): Ignore the web_link file type (Box)
- Fixed (Pro): Changes in AWS S3 to properly retain the storage class when updating object's metadata.
- Fixed (Pro): Changes in OneDrive API to retrieve and use the retry-after value from the response error JSON, if present
- Fixed (Pro): When uploading multipart Amazon S3 objects the ACL was not being set
- Fixed (Pro): Change in B2 API to request a new Upload URL when receiving a socket error 10054
- Fixed (Pro): Dropbox was throwing an exception when Cloud DB was not found on the cloud
- Fixed (Pro): Fix a problem where multi-threaded upload wouldn't work for some endpoints (Wasabi)
New in SyncBackPro 8.5.122.0 (Feb 13, 2019)
- Updated: Faster file deletion and checking if a file exists
- Updated: No delay when changing profiles in main window
- Updated: Better handling of temporary files
- Updated (Pro): The script function EventOut now writes to event log even if debug output is not enabled
- Updated (Pro): May fail to delete a temporary database file when scanning large number of files on the cloud
- Updated (Pro): Not using Google+ scopes
- Fixed (SE/Pro): Ancestor for 'Label3' not found crash when configuring Touch
New in SyncBackPro 8.5.115.0 (Jan 17, 2019)
- Fixed (Pro): May attempt to use wrong file version (Backblaze B2)
- Fixed (Pro): Fix B2 API to properly work with application keys that are not restricted to a bucket
- Fixed (Pro): Fixed Decisions-Files to not allow rename of destination (not supported Backblaze)
- Fixed (Pro): Filenames with forward and backward slashes on Google Drive are now handled correctly
- Updated: If using Windows 8.1 or newer then TLS 1.2 is used by default
- Updated: Maximum FTP connection retry attempts now 65535
- Updated: File and folder selections database opened read-only when profile run unattended
- Updated (Pro): Files uploaded to S3 are now uploaded using threads when 10MB or larger (was previously 5MB)
New in SyncBackPro 8.5.97.0 (Oct 31, 2018)
- Fixed: Unable to select multiple rows in main window and Differences window
- Fixed: Argument out of range exception when DPI is over 100 percent
- Fixed (SE/Pro): When set background colour of profile in main window the colour selection dialog opens with the current colour
- Updated (SE/Pro): Maximum number of threads for Touch increased to 30
- Updated (Pro): Backblaze B2 now uses TLS 1.1 at the minimum
- Updated (Pro): Backblaze B2 was not using multi-threaded downloads
New in SyncBackPro 8.5.90.0 (Sep 20, 2018)
- New (SE/Pro): -copy command line parameter to copy profiles
- New: In About window you can have an email sent to you for your Customer Account Portal
- Fixed: Roaming shortcuts that were causing problem with Start Menu in Windows 10 are now automatically deleted
- Fixed: When deleting an entire folder from file and folder selections, versions were not delete if stored in root folder
- Fixed: Copying sparse files using SyncBack copy methods sometimes caused access violation
- Fixed: Detection of changed program settings caused constant reload of program settings
- Fixed (SE/Pro): If Upgrade Assurance was cancelled it was showing it as expired even when still valid
- Fixed (Pro): When creating new cloud profile it was using the linked account always
- Fixed (Pro): Was not automatically reconnecting to SBMS service if connection lost
- Fixed (Pro): Fix AV bug in BackBlaze B2 when token expires due to time
- Fixed (Pro): Ignore large files on BackBlaze B2 that are not completed yet from the folder listing
- Updated (Pro): Any failed large file uploads to BackBlaze B2 old than 7 days will be deleted automatically at the end of a profile run
- Updated: Update checks will use proxy settings if available
- Updated: Runtime Intelligence now uses Google Analytics
- Updated: When adding or removing profiles to a group profile the run parallel checkbox is disabled automatically if the group profile contains another group
- Updated: Help file
New in SyncBackPro 8.5.75.0 (Aug 14, 2018)
- Fixed: Scaling issues on file and folder selection window
- Fixed: When restoring from a single zip, and deleting a file not in the zip, the file was not deleted
- Fixed (Pro): Cloud tokens may not be refreshed when required
- Fixed (Pro): When restoring from a single Zip file that uses filename encryption the dates and times were not set correctly
- Fixed (Pro): The critical error was not always recorded in SBMS
- Fixed (Pro): Scanning folders on OneDrive may return incomplete list
- Fixed (Pro): When running a multi-Touch profile the profile fails on second Touch server or if domain name used in user name
- Fixed (Pro): Now works with the new application keys in Backblaze B2
- Fixed (Pro): Use a more recent documented method to retrieve the siteURL for OneDrive Business accounts
- Fixed (Pro): Manual sync with SBMS did not try to connect to SBMS server if connection is currently offline
- Fixed (Pro): May become non-responsive if heavy-throttling occurs by OneDrive servers during account authorization procedure
- Updated (Pro): When creating a new profile can create an empty cloud profile without using linked cloud account
- Updated (Pro): Better detection for when using DreamHost for cloud storage
- Updated (Pro): Automatic SBMS background syncs are now every 5 minutes (was previously every hour)
- Updated (Pro): Automatic SBMS background login retries are now every 1 minute (was previously every 15 minutes)
New in SyncBackPro 8.5.62.0 (Jun 11, 2018)
- Fixed: Correctly handles the special OneDrive folders
New in SyncBackPro 8.5.60.0 (Jun 1, 2018)
- Fixed: The system call level is not correct error when creating folder on network share
New in SyncBackPro 8.5.58.0 (May 30, 2018)
- New: Tray icon pop-up menu item to reset all window positions and sizes
- Updated: Improved detection of window being off-screen
- Updated: Better crash handling on program exit
- Updated (SE/Pro): Get proxy settings from IE settings for Upgrade Assurance checking
- Fixed: The transfer speeds now correctly use the binary symbol (e.g. MiB/s instead of MBps)
- Fixed: New Microsoft reparse tag values may cause problems when scanning local OneDrive folders (not on cloud)
- Fixed: Checks if the window is allowed to be minimized or maximized when restoring window state
- Fixed: Selection database files (.db-shm and .db-wal) are made warnings instead of errors if missing
- Fixed: Some IMAP4/POP3 email servers require the password to be wrapped in double-quotes and quotes in the password escaped
- Fixed (SE/Pro): The number of threads for Touch was not being saved and stayed at 5
- Fixed (Pro): Multi-threaded scanning with the cloud could potentially fail (although no cases reported)
- Fixed (Pro): Improved performance backup email profiles that are run from scheduler or command line
- Fixed (Pro): Tech support wizard now includes cloud debug log for linked account attempts
- Fixed (Pro): Default list file limit set to 1000 for Backblaze B2 instead of 100 to avoid extra class C charges
- Fixed (Pro): Customize User Agent string in Request headers for SharePoint/OneDrive Business connections to avoid 302 errors
- Fixed (Pro): Retry an S3 upload if it fails due to RequestTimeTooSkewed error
- Fixed (Pro): MD5 calculation changed for some cloud services to avoid some rare errors
New in SyncBackPro 8.5.43.0 (Apr 17, 2018)
- Fixed: Pressing escape on profile schedule window no longer deletes the schedule
- Fixed: Delete key sent on connect and disconnect when using VNC
- Fixed: Folders on some cloud services were being deleted even if not empty
- Fixed (Pro): Potential problems with Google Drive files which have unusual meta-data
- Fixed (SE): Touch username is now correctly disabled in new profile wizard
- Fixed: Multi-threaded scanning for FTP
- Fixed: Opening and comparing files on restricted containers via Differences and File Prompt
- Fixed: Duplicate entries for shared settings in profile configuration
- Updated: If a schedule repeats longer than it recurs then a warning is displayed
- Updated: The Do Not Store Password schedule option has been removed for Windows 10
- Updated: If an FTP server responds with no data when getting a directory list then SyncBack will try again
- Updated: Supports multi-part upload for Wasabi cloud service (S3 API compatible service)
- Updated: The installer no longer enables the sign up to mailing list option by default
- Updated: Italian translations in installer
- Updated (Pro): Wasabi (S3 compatible service) support
- Updated (Pro): S3 locations updated
New in SyncBackPro 8.5.33.0 (Mar 1, 2018)
- Updated: The bar on the performance tab has been removed and the performance check now includes FTP and cloud thread usage
- Updated: Option to switch off profile prompt notifications for ALL profiles (in profile configuration and global settings)
- Updated (Pro): Better at handling change detection with files uploaded to Backblaze B2 not using SyncBackPro
- Fixed: When using compression, files with a last mod date of 1899 were ignored. Now not ignored if 1899 or newer.
- Fixed: Was not ignoring missing files when required and uploading to FTP
- Fixed: Log was missing some information when profile ended with a critical error, e.g. drive missing
- Fixed (Pro): Managed profile sync sometimes did not work (also need to update to SBMS Service V2.12.0.0)
New in SyncBackPro 8.5.26.0 (Feb 1, 2018)
- New: Option to keep debug history
- New: If a profile prompts, e.g. Differences window, then a Windows notification is shown
- New: New variables COMPAREFILES, COMPAREDIRS, SOURCESIZEBYTES, DESTSIZEBYTES
- New (Pro): Can have the Content-Disposition set to attachment for uploads to S3
- Updated: Polish translations updated by Grzegorz Miros
- Updated (Pro): Help file contains details on specifying Content-Type and Content-Disposition for cloud uploads
- Fixed (Pro): Better throttling handling for OneDrive
- Fixed (Pro): S3 and Backblaze B2 fixes when using multiple threads
New in SyncBackPro 8.5.25.0 (Jan 31, 2018)
- New: Option to keep debug history
- New: If a profile prompts, e.g. Differences window, then a Windows notification is shown
- New: New variables COMPAREFILES, COMPAREDIRS, SOURCESIZE, DESTSIZE
- New (Pro): Can have the Content-Disposition set to attachment for uploads to S3
- Updated: Polish translations updated by Grzegorz Miros
- Updated (Pro): Help file contains details on specifying Content-Type and Content-Disposition for cloud uploads
- Fixed (Pro): Better throttling handling for OneDrive
- Fixed (Pro): S3 and Backblaze B2 fixes when using multiple threads
New in SyncBackPro 8.5.17.0 (Jan 12, 2018)
- Updated (Pro): Now detects other failures for multi part upload completion (S3)
- Fixed: In rare cases an FTP download may be a success even when failed (550 result)
- Fixed: The last FTP proxy type is actually HTTP with NTLM
- Fixed (Pro): May fail to decrypt cloud passwords
- Fixed (Pro): Failed to download profiles from SBMS
- Fixed (Pro): Not retrying on failure for some cloud services (S3, Google Storage, Backblaze B2, Azure)
- Fixed (Pro): Errors related to compiler optimization bug (SugarSync, Amazon Cloud Drive, OneDrive)
New in SyncBackPro 8.5.5.0 (Dec 4, 2017)
- Fixed: If display scaling is 175% or more then images removed from menus to avoid scaling problems
- Fixed (SE/Pro): Runtime error 231 on 64-bit versions when using FTP or SFTP
- Fixed (SE/Pro): Access violation on program exit on 64-bit versions
- Fixed (Pro): OneDrive API changes for better resolve of failed upload for large files
- Fixed (Pro): Uses TLS 1.1 at a minimum with Box
- Fixed (Pro): Potential problems with Box when getting read timeouts
- Updated (Pro): Using new discovery service API endpoints for OneDrive Business and SharePoint - need to re-authenticate
- Updated: When importing multiple profiles, normal profiles are imported first then group profiles
New in SyncBackPro 8.4.5.0 (Nov 20, 2017)
- Updated (Pro): OneDrive service interface updated
- Updated (SE/Pro): Prompts to get Upgrade Assurance details when serial number entered
- Updated (SE/Pro): The 32-bit installer advises that the 64-bit version is used if using 64-bit Windows and 32-bit version not already installed
- Updated: Status bar for text, e.g. debug mode, instead of changing main window caption
- Updated: Help file
- Fixed (Pro): May get timeout changing directory on broken SFTP V6 servers
- Fixed: In some cases was always minimizing to tray
New in SyncBackPro 8.3.16.0 (Nov 1, 2017)
- Fixed: Missing Linked Cloud Accounts menu item in Preferences main menu for SE/Lite/Free
- Fixed: When changing settings encryption it may fail to re-encrypt settings
- Fixed: URL handler for links in log file was not always registering
- Fixed: Multi-threaded FTP scanning may return licensing error
- Fixed: Scanning a OneDrive folder will not cause files to be downloaded
- Fixed (Pro/SE): 64-bit installer now correctly skips ReadMe window if already installed
- Fixed (Pro): Fixed methods to get file lists and file info from Box
- Fixed (Pro): Rare date time conversion issue with OneDrive
- Updated: Compatibility with Windows 10 Fall Creators Update
- Updated: No longer ignoring OneDrive placeholder files
- Updated: Better at importing corrupt profiles
- Updated (Pro): Allow SAS to include account policy (Azure)
- Updated (Pro): Performance improvement getting file lists from OneDrive
- Updated (Pro): Will not prompt to save when file and folder selection window closed if no changes
New in SyncBackPro 8.3.6.0 (Sep 25, 2017)
- Fixed: Minor user interface fixes
- Fixed (Pro): With Google Drive and OneDrive it may sometimes fail because it wrongly assumes a folder on the cloud already exists
- Fixed (Pro): Backblaze B2 connections not using correct number of upload and download threads
- Fixed (Pro): OneDrive API change, better handling of resumable uploads
- Fixed (Pro): Backblaze fix to properly return prefixes (folders) when we navigate through folders
- Fixed (Pro): Google Drive fix a problem introduced in last release when we stopped allowing files with no download URL to be listed. Now we also allow files to be listed that only have Export Links such as Google Docs and Sheets
- Updated (Pro): Default number of upload and download cloud threads increased to 30
- Updated (Pro): With a fast connection the upload and download speed for S3, Azure, B2, Google Storage and OpenStack has been improved
- Updated (Pro): Backblaze B2 performance improvements
New in SyncBackPro 8.2.18.0 (Aug 22, 2017)
- New (Pro): For cloud services can now choose which TLS encryption to use
- Fixed: DST time conversion
- Fixed: Try to fix SQL error 5 for the selections DB by enabling shared caching and WAL.
- Fixed: Threaded copy sometimes got stuck
- Fixed (Pro): Google Drive API - Ignore files that are not downloadable (e.g. maps) from folder listings
- Fixed (Pro): OneDrive API – Do not pass AUTH token during a resumable upload or download
- Fixed (Pro): Also set Last Modified time during the same API call when doing a Rename/Move
- Fixed (Pro): Filename case for parent folders may be wrong when copying from Dropbox and using delta scan
- Fixed (SE/Pro): MTP Remote write error: Unknown error -2147024809 ($80070057)
New in SyncBackPro 6.5.30.0 (Feb 24, 2014)
- Updated: Improved performance when using safe copy or versioning with Amazon S3
- Updated: Better progress feedback with Amazon S3 when retrieving meta-data
- Fixed: Scan failed (1): Incorrect function is caused by incompatible NAS drives. They are now detected automatically and alternate method is used.
- Fixed: SyncBack would not start on login if a profile was also set to run on login
- Fixed: Failed to uncompress some LZMA level 1 or level 9 files
- Fixed: Sometimes profiles would never end if more than 1000 objects in a folder on Amazon S3
- Fixed: LZMA level 9 compression out-of-memory errors now correctly recorded
- Fixed: Socket errors related to temporary redirection on Amazon S3
New in SyncBackPro 6.5.22.0 (Jan 7, 2014)
- Updated: Fallback to backup copying method when access denied is now enabled by default
- Updated: Application manifest updated to fix blurry text on high DPI displays
- Updated: RunAfterFileCompare can now set the action to CACTION_ERROR
- Fixed: Spurious FTP licensing errors when running multiple FTP profiles in parallel
- Fixed: Chance of resuming an SFTP upload increased
- Fixed: Renaming large version files on Amazon S3
- Fixed: Open Source/Destination will now use supplied network credentials
- Fixed: Items on File collision window may be drawn in wrong place in some situations
- Fixed: Help window automatically closed when a windows is opened or displayed (to stop help window locking-up) Fixed: Uncompress failures for some files when using highest or lowest level of LZMA compression
New in SyncBackPro 6.5.15.0 (Nov 19, 2013)
- New: Can verify servers public key (SFTP)
- New: Able to revert from a V7 installation (currently in beta)
- Updated: Global settings option to prompt when running profiles on shutdown or restart is now not available on Vista and newer
- Fixed: In some cases Open Right/Destination opened My Documents folder if actual folder did not exist
- Fixed: 509 error when restoring from a single zip file and nothing was restored
- Fixed: Greatly reduced CPU usage while idle and have hundreds of profiles
- Fixed: File and folder selections when a filename was wrapped in single or double quotes
- Fixed: Improved error handling when scanning file systems
- Fixed: Directory attributes and creation date were not copied when moving a file due to a rename
- Fixed: File icons sometimes do not appear on Windows XP in the Differences window
- Fixed: Restored missing Abort and Help buttons on File Collision window
New in SyncBackPro 6.5.4.0 (Aug 6, 2013)
- New: Option to tell Windows not cache/buffer a files contents in memory when copying it
- New (SE/Pro): -logoff command line switch
- Fixed (Pro): Restoring files over 4GB in size failed when using Azure
- Fixed: Was not expanding and selecting profiles when started
- Fixed: May fail if FTP server disconnected during creation of large Zip file
- Fixed: May fail to detect case changes when using SmartSync if configured to detect them
- Fixed: Single zip backup not working when using cloud storage
- Fixed: Groups were not run in reverse when supposed to, e.g. during restore
- Fixed: Time shown for dates and times where time is exactly midnight
- Updated: The FTP alternative file list parser can now also be used when using MLST
- Updated: Open Right/Destination will also open optional full backup directory
New in SyncBackPro 6.4.3.8 (Jun 4, 2013)
- Updated: Profile schedule window on Vista and newer redesigned to reduce height
- Updated: No longer uses external IP Works DLL for connection testing and SysLog server integration
- Updated: Help file
- Fixed: Memory leak when using Azure
- Fixed: If a profile run as part of a group and set to abort if too many files deleted then it did not abort group if run as part of group
- Fixed: In rare cases, and only on Windows 8, if an HTML log file or other external program is run from SyncBack then it waited for external program to terminate before continuing
- Fixed: Was not running profiles on logout when set to (bug introduced in V6.4.3.0)
New in SyncBackPro 6.4.3.0 (May 20, 2013)
- New: Run a profile without allowing changes (useful for Fast Backup profiles that use Versioning)
- New: New "Run task as soon as possible after a scheduled start is missed" option in Vista and newer task scheduler
- New: Restore wizard now also checks when a profile was last run successfully
- New: Option to copy short filenames
- New: -nochanges command line parameter
- New: Port mode for active FTP connections
- Updated: SyncBack now opens and reads the local files when sending via FTP instead of component
- Updated: The file system properties list in the log file expanded to include more file system attributes
- Updated: ReFS support
- Updated: Automatic profiles backup option split so can choose to backup if attended and/or unattended
- Updated: Removed support for SBMS V1
- Updated: Glacier objects stored in S3 are ignored
- Updated: Variables used in the export of the email body and attachments are now each expanded into valid filenames
- Fixed: Problem with Technical Support Wizard if profile name is sorted before *Program* entry
- Fixed: Tray icon will reappear if Windows shell (explorer) is restarted
- Fixed: Does not prompt twice in succession to remove blank password restriction
- Fixed: For FTP if automatically switching to active mode from passive mode then active settings were not being used
- Fixed: Looping forever in some file operations when file system lies, e.g. about having removed read only attribute
- Fixed: FTP looping forever reconnecting when a non-data transfer command is sent
- Fixed: Eject and Load of media was wrong for restore
- Fixed: The details for a file or folder that is a symbolic link will be from the destination and not the symbolic link itself
- Fixed: Copies of files, e.g. when using safe copy or versioning, were not using SSE on S3 if enabled
- Fixed: Safe copying was failing with files over 5GB in size on S3
New in SyncBackPro 6.3.13.0 (Mar 1, 2013)
- New: %SBLATESTVERSION% and %SBNEWVERSION% variables
- New: Proxy support for cloud access
- Updated: Progress column is not visible by default
- Fixed: Sometimes get access violation when importing profiles
- Fixed: Invalid bucket name when making versions on S3 and bucket name is not technically valid
- Fixed: Wrong MIME type on files uploaded to S3 or Azure if versioning being used
- Fixed: Amazon S3 bucket names are now treated as case sensitive
New in SyncBackPro 6.3.7.0 (Jan 28, 2013)
- New: Email services can be selected for easier email configuration
- New: -shutdownforce command line parameter
- New: -rebootforce command line parameter
- New: Support for DreamObjects (S3 compatible storage service)
- New: Support for S3for.Me (S3 compatible storage service)
- New: Support for SBM Service V2. Also supports V1 for backwards compatibility.
- Fixed: Path to event log DLL in registry corrected on 64-bit versions of Windows
- Fixed: On Vista the folder selection dialog would give child folder name twice if double-click folder and click Select Folder
- Fixed: Manifest file so that the compression DLL does not need to be registered
- Fixed: When zipping and log set to only warn if files missing then it was not recording a warning
- Fixed: Mime type discovery fixed
- Updated: Detects and reformats cloud URL if entered with http or https
- Updated: New profile wizard has SSL checkbox for cloud
- Updated: When-Insert and When-Login,Logout profile settings window update to not show if background backups disabled
- Updated: Help file
New in SyncBackPro 6.2.15.0 (Oct 30, 2012)
- Fixed: Sometimes does not expand LABEL or SERIAL variables when Run Before is mounting a new drive
- Fixed: Versioning settings cleared when modifying profile
New in SyncBackPro 6.2.14.0 (Oct 30, 2012)
- New: %WARNINGSTOTAL% variables
- Fixed (Pro): Incorrect warning about profile not being compatible with current version of SyncBack
- Fixed: When uninstalling and set to run on login then run on login is now removed in Windows
New in SyncBackPro 6.2.11.0 (Oct 22, 2012)
- New: Option in FTP settings to not fallback to an unencrypted connection if encrypted connection attempt fails
- New: Option in FTP to force use of LIST command instead of MLST
- New: Can define the LIST command to use
- New: Option to use alternative LIST parser so can use old and rare FTP servers previously not supported
- New: /NoBackupPrompt installation command line parameter to stop prompting about V5 profile backup folder
- New: /SNU and /SNU2 installation command line parameters now update registry even if already set
- New: -silent command line parameter
- New: Profiles can be queued to run serially in order
- New: Profiles can be run unattended from main user interface
- Fixed (Pro): Sorting in the Differences window when the database is being used, e.g. there are hundreds of thousands of files
- Fixed: Profiles were created in same folder as program settings instead of where they were defined to be stored
- Fixed: Some empty folders (had sub-folders but not files) were wrongly shown in Differences window
- Fixed: Differences window was not showing destination filename when using others attributes and there were no case differences
- Fixed: Add programs dialog in versions previous to Windows Vista caused crash
- Updated (Pro): Variables set by scripts can now be used in filters
- Updated (Pro): Exported profiles now also include all profile configuration scripts
- Updated (Pro): The SFTP private key filename can use variables
- Updated (Pro): The SFTP private key file is now exported and imported
- Updated (Pro): CD/DVD/ISO burning is not possible with Windows 8 (must run it in Windows 7 compatibility mode)
- Updated: Improved the performance when excluding many files in the Differences window
- Updated: Improved program startup time and display refresh time when there are profiles with schedules
- Updated: The log will now show which profile in the group caused the group to fail and why
- Updated: Danish translations
New in SyncBackPro 6.2.0.15 (Aug 14, 2012)
- New: Ukrainian translation (thanks to Ambartsumyan Eduard)
- New (Pro): Windows shell extension to use profiles with folders selected in the Windows (Explorer) shell
- New (Pro): Can manually add a bucket/container to the list
- New (Pro): %SMARTSTATUSSRC% and %SMARTSTATUSDEST% variables
- New: Can use volume GUID paths for the source and destination (unmounted volumes can now be accessed)
- New: Technical support wizard can now export group profiles (and includes all the profiles in the group)
- New: -noselect and -nofilter command line parameters
- Updated (Pro): The FTP profile configuration settings window now checks to see if SFTP key is valid
- Updated: Find Serial Number button added to About window
- Updated: SmartSync logic changed for deleting folders when folders decision is set to Automatic
- Updated: File collision window updated to resize better, shorten filenames, hint if text is truncated, etc.
- Updated: On Vista and newer schedules can now be set to run just once
- Updated: Google Storage option in new profile wizard
- Updated: Help file
- Fixed (Pro): Was not prompting for cloud password if set to
- Fixed: Drive does not exist error when a base directory is a mount point and there is no V: drive
- Fixed: Sometimes crashes when switching from Scripts to Easy mode in profile configuration
- Fixed: Floating point division by zero crash when showing Differences window and lots of directories but no files
- Fixed: Rare cases of List index out of bounds (0) errors when checking for a new version
- Fixed: Main user interface no longer shows profile time limit countdown if profile is run as simulated or restore
- Fixed: Auto-close may fail if run unattended
- Fixed: Versions drop-down list now displays scroll-bar so no selection problem if many versions
- Fixed: On Vista and newer can now have a profile set to run on login and scheduled
New in SyncBackPro 6.1.1.22 (Jun 19, 2012)
- New: Bandwidth throttling when using cloud
- New: Special links in HTML log files to exclude files and folders and to modify the profile
- New: Option to verify files serially instead of in parallel (can fix rare problem on some systems)
- Fixed: When uploading large files to S3 it may fail with error InvalidPartOrder
- Fixed: Very large files may fail to restore from S3 with EOutOfMemory or ERangeError errors
- Fixed: Very large files may fail to upload with 400 Bad Request errors or other errors
- Fixed: Using run-time scripts may cause profile to freeze on termination
- Fixed: The mounted file system does not support extended attributes error when creating directories
- Fixed: May crash on start on some systems if there is invalid data in the registry for MIME types
- Fixed: Unable to refresh bucket list if there was a bucket with an invalid name
- Fixed: Now works with US buckets that did not follow the stricter naming rules
- Fixed: Setting a files date and time or attributes on the cloud (without copying the file)
- Fixed: Was not setting MD5 hash value in meta-data when uploading to cloud
- Fixed: Long filenames when using cloud
- Fixed: 'Drive not found' bug with some junction points when it is the base directory
- Fixed: In some situations changes in folder case are not detected
- Fixed: Silently fail if destination cannot be reached would cause profiles not to run if using cloud
- Fixed: Windows handle leak when using compression
- Fixed: Could get corrupt file and folder selections if chose skip and exclude from Differences window
- Updated: Prompts for cloud username if it is wrong (when creating and modifying profiles)
- Updated: In Differences window, when double-clicking an entry, will now open file/folder if there is nothing to compare with
- Updated: Warning to clear history if switching compression on or off and using a SmartSync profile
- Updated: The file and folder selection tree now correctly saves case changes for folders
- Updated: On Vista and newer it now uses a more modern directory selection dialog
- Updated: Small tweaks to installer and default scheduled task settings for Windows 8
- Updated: All action prompt decisions must now be made before any copying or deleting is done
- Updated: madExcept exception handler
- Updated: Debug log now includes CPU usage
- Updated: On XP and 2003 more VSS error codes are recognized and reasons for retry increased
- Updated: Retries under more circumstances when using cloud
- Updated: The option to not compare files in parallel added (same as verify files in parallel setting)
New in SyncBackPro 6.1.0.5 (May 15, 2012)
- New (Pro): Server Side Encryption support for Amazon S3
- New: Russian translations by Igor Pavlov
- New: Option to view FTP and email communication messages
- New: The email character set can now be chosen
- Updated (Pro): Completely new and improved cloud code
- Updated (Pro): No longer creates folders in the cloud (so no more empty files representing folders)
- Updated (Pro): Option to split files to upload to S3 removed as file size limit is now 5TB and parallel upload of parts implemented
- Updated (Pro): Content-type is automatically set for files uploaded to cloud
- Updated (Pro): Uploading split zip files to cloud no longer uploads to TMP files and renames
- Updated (Pro): New %EMAIL_SUBJECT32% and %EMAIL_SUBJECT64% variables
- Updated: On Vista and newer, when creating a schedule it will fall-back to creating a logged-on-only schedule if it cannot create a schedule with a password
- Updated: On Vista and newer, when setting SyncBack to start with Windows, it no longer prompts for login password
- Updated: Variables can now be used in email settings for To, CC, BCC, From, Reply-To, and Receipt
- Updated: If FTP server returns 451 error when getting a directory listing then it will try again
- Updated: Gives error message if schedule interval is too short or too long when using Windows Vista or newer
- Updated: Can choose to be prompted for many of the file and folder decisions when using fast backup
- Updated: Restricted some file decision options when using archive attribute fast backup
- Updated: History grid redesigned
- Updated: The logic for deciding if the destination/right files and folders are shown in the selection tree has been changed
- Updated: Warning given if set to delete every file in a folder to make it empty
- Fixed (Pro): Crash when selecting files and folders and files stored on cloud
- Fixed (Pro): Recognizes empty folders created in S3 using AWS console
- Fixed (Pro): Unable to modify SBM Service connection settings
- Fixed (Pro): Was not setting last modification date & time of files downloaded from cloud when file was put there by another cloud utility
- Fixed (Pro): A folder already exists with that name error no longer happens when replacing a file on S3 that was put there by another cloud utility
- Fixed (Pro): May not see versions stored in cloud when set to scan all files in one go
- Fixed (Pro): Burning to CD/DVD may fail if empty files are the last files added to a disk once its nearly full
- Fixed (Pro): Email component has MAX_PATH filename limit so errors when filenames too long for component
- Fixed: File and Folder selection window had checkboxes enabled to filter content when it should not
- Fixed: Click Choose sub-directories or Choose Filter with certain profiles types, and when using the cloud, failed
- Fixed: FREEMBYTESDESTBEFORE variable was not being set and FREEKBYTESDESTBEFORE was in mbytes and not kbytes
- Fixed: Not recognizing some alternate shells and so not displaying Differences window etc.
- Fixed: Rare cases where Stop! button causes button panel to resize
- Fixed: History is now correctly listed from newest to oldest (was oldest to newest)
- Fixed: Was create and deleting empty directories twice in some cases
- Fixed: Junction or mount points pointing to disconnected or missing drives are now correctly detected
- Fixed: Sometimes a locked/open file could not be copied if it was inside a junction/mount point
- Fixed: If base folder is a junction or mount point then deleting all empty folders setting will not delete the junction or mount point itself
New in SyncBackPro 6.0.12.0 (Jan 9, 2012)
- New: EMAIL_MD5 and EMAIL_IDORMD5 variables for backup of email messages
- New: Now supports Amazon S3 server-side-encryption
- New: RUNRESULT variable for text of profile result (to use for emailing log, for example)
- Updated: Better handling of emails with no message ID (which they should have)
- Updated: Better handling of invalid EML filenames
- Updated: ExtremeCopy functionality removed
- Updated: Wording of text related to case changes on the file and folder decisions settings pages
- Updated: Email sending and receiving components
- Updated: Help file updated to explain what happens with identical files but different dates and times or attributes
- Fixed: Was wrongly assuming files uploaded to the cloud via other utilities were folders
- Fixed: Not recording correct error message when failing to retrieve an email
- Fixed: SysLog messages can now be sent to localhost
- Fixed: Safe copy not used when uploading to cloud unless versioning is used
- Fixed: Rare case of skipping a file when dumping from memory to database
- Fixed: Was keeping new SBMS login details even if the login failed
- Fixed: When using SFTP it would not reconnect if disconnected when checking if a directory existed
- Fixed: Taskbar progress fixed (was broken in V6.0.3)
- Fixed: Case renaming now renames files instead of re-copying files (if the file is not empty and unchanged)
- Fixed: Space bar can now again be used to continue when Differences window appears
- Fixed: In rare cases emailing the log may result in a sending data error 5
- Fixed: May crash when using DISKLABEL, DISKSERIAL, or DISKHWSERIAL
- Fixed: Compressed file contains a different file than expected non-critical error on versioned compressed files
- Fixed: File and folder selections no longer cached when profile run as may have slowed performance in some cases
- Fixed: Issues related to minimizing and restoring window
- Fixed: WmiPrvSE.exe service using high amount of CPU. It will still use CPU time if profiles are set to watch for program starts and stops.
- Fixed: Event log wrongly recording that trial has expired
- Fixed: Display refresh timer functionality changed to avoid rare Not enough timers available errors
- Fixed: Was not deleting a temporary file (live run-time log)
- Fixed: Mirror left/right button on Differences screen was sometimes just copying attributes instead of actual file
New in SyncBackPro 6.0.3.3 (Nov 14, 2011)
- New (Pro): EMAIL_IMAPFOLDER variable for when backing up emails
- New (Pro): Can now get list of IMAP folders
- New (Pro): Option to ignore S3 bucket naming restrictions
- Updated (Pro): Cloud code improved to handle errors better and retry in more situations
- Updated (Pro): Detects IMAP4 servers saying user is over bandwidth quota
- Updated (Pro): ExtremeCopy DLL updated to avoid crashes
- Updated (Pro): With backup of email messages it will ignore date and time differences if the email does not have a date
- Updated: Installer to get around rare case of translation files being locked during install (because SyncBack is still running)
- Updated: The logic on getting version information from a versioned file
- Updated: Shows Insert in background column if profile is set to run on insert of a drive/disk
- Updated: Small improvement in email performance
- Fixed (Pro): Gives estimated time left when using cloud
- Fixed (Pro): Possible crash when uploading to the cloud
- Fixed (Pro): Backup to single zip on the cloud
- Fixed (Pro): Email export sub-folder was using wrong default value
- Fixed: May corrupt a child profile when running a group via the interface
- Fixed: Was not showing filename in lower-left panel in Differences window
- Fixed: Was not skipping folders already found but with different case
- Fixed: Help file window may lock-up if help displayed from two different windows while keeping help window open
- Fixed: Now correctly restores SyncBack window if trying to run a second instance
- Fixed: -posreset will now correctly reset the main user window
New in SyncBackPro 6.0.0.15 (Oct 25, 2011)
- New: Amazon S3 and Google Storage support
- New: Microsoft Azure support
- New: Backup of emails stored on a POP3/IMAP4 server
- New: Integration with SyncBack Management Service
- New: Can use a SysLog server for notification about profiles runs, creation, etc.
- New: New script functions, function calls, and example scripts
- New: SBHistory scripting object for access to profiles run history
- New: Detect changes in file and folder name case and optionally correct them
- New: SmartSync options to skip and ignore changes
- New: Can choose what to do when you are not prompted for action
- New: Option to not log successfully copied, moved, or deleted files
- New: Option to not send log email if simulated run
- New: Can encrypt log file when emailed
- New: -log command line parameter to display latest log file for a profile
- New: -clearss command line parameter to clear SmartSync data
- New: -monoff command line parameter to switch monitors off
- New: -importprofile and -importscript command line parameters to import multiple profiles or scripts using wildcards
- New: -sbmssync command line parameter and appropriate exit code
- New: -profbackup command line parameter
- New: -winpassword to specific Windows login password
- New: Copy symbolic links as-is
- New: Email bodies can now be plain text and/or HTML
- New: Profiles can now be stored in the users roaming application data folder
- New: Option to ignore NTFS encrypted files
- New: Uses Windows 7 taskbar features
- New: Can stop Windows sleeping while profile is running, e.g. when burning CD
- New: Can use hardware serial number for drive insert detection and in new variables
- New: Groups can also have time limits
- New: When running a profile because of file or folder changes then can set how long to wait with no changes before running profile
- New: Many new variables, e.g. HWSERIAL
- New: Regular expressions now treat the backslash character as a line separator
- New: Group settings main window lets you filter profiles listed
- New: Profile run history can be seen in profile setup window
- New: /max prefix to maximize window when running programs in Run Before and Run After
- New: On Vista and newer, and if the locking application supports it, it can report the application that has a file locked
- New: Profile result shows if profile aborted because too many files would be deleted
- New: Stop, pause, and resume buttons in progress panel
- Updated: Option to not split files when burning to CD/DVD/ISO
- Updated: Profile configuration scripting expanded so that scripts can now have their own profile configuration settings page
- Updated: Installation command line parameters for SBM Service connection
- Updated: SMART drive failure improved so can now detect failure on more drives including external drives
- Updated: Button on Log settings page to perform SMART test on all drives
- Updated: The scripting section of the help file has improved formatting to make it more readable
- Updated: New schedules are not limited to 1 day run time limit
- Updated: On Vista and newer, profiles set to run on shutdown/logoff always run unattended
- Updated: Versioning filename format changed so filename is before version information
- Updated: Can now specify percentage of files deleted to trigger warn or abort
- Updated: Old log files can be viewed for a profile while it is running
- Updated: When pausing a profile, it will now pause the FTP upload/download
- Updated: Silent fail now tests connection by connecting to the port on the server instead of pinging the server (as many servers disable WAN pings)
- Updated: Detection of a profile already being run also checks other sessions (with same user)
- Updated: Tweaks to make user interface better with terminal services connections
- Updated: Next run date and time column takes into account the next run date and time of parent group(s)
- Updated: U3 support dropped as SanDisk began phasing out support for U3 Technology in late 2009
- Updated: Text log file format updated so easier to find errors
- Updated: FTP resume of upload or download when disconnected will use MD5 hashing instead of CRC32 if server supports it
- Updated: Shows if schedule is disabled and does not ignored disabled schedules on Vista and newer
- Updated: When profile settings pages now warn if SyncBack is not set to start with Windows
- Updated: Log contains warning if profile replaces group level variables and variables setup window also warns user
- Updated: Numerous other small changes, fixes, and optimizations
- Updated: Numerous interface tweaks to ensure translations are not truncated and translated when possible
- Updated: HTML log file creation quicker
- Updated: Log file now shows Fast Backup variable and its value if its a rescan
- Updated: Renaming profiles is quicker
- Updated: Window auto-close now returns windows actual caption on failure
- Updated: Window forcibly auto-close more likely to work with non-admin users
- Updated: Alternative paths list functionality improved
- Updated: Action menu items in Differences window now in main pop-up menu for quicker access
- Updated: Differences window and File Prompt now detect if the profile has been aborted, e.g. from tray icon
- Updated: New scheduled tasks and imported schedules are now set correctly for Windows 7 or Vista as appropriate
- Updated: Will now prompt to remove blank password restriction if set to do so when importing a profile with a schedule
- Updated: Option to be prompted to remove Windows blank password restriction is disabled if user does not have access rights to change it
- Updated: When importing a profile on pre-Vista versions of Windows it will change the schedule user account and prompt for the login password
- Updated: New profile wizard is quicker to populate location drop-down lists
- Updated: Tweaks to improve safe copy performance when copying from filesystem to filesystem
- Updated: ExtremeCopy component updated to V2.0.1
- Updated: Help file now includes details on SyncBack Management Service
- Updated: Clears recent and frequent jump lists on Windows 7
- Updated: Source and destination folder icons flash to help user know where to click
- Updated: Adds bug report file to tech support zip file if it can be found
- Updated: Improved speed of saving FB and SS data
- Updated: Email addresses can now be separated by commas as well as semi-colons
- Updated: Restore wizard displays error immediately when trying to restore from ISO or email backup
- Updated: Change in logic for files that have the same date and time and "Use newer" or "Use older" is selected as the action
- Updated: After program start the user is prompted if they want to delete corrupted profiles if any are found
- Updated: Schedules tasks logon type changed so can run if user logged in even if schedules stored password is wrong
- Updated: Fewer screens on installer (especially if already installed) and splash not shown if silent install
- Updated: Installer will reboot computer if needed if a file can only be replaced or deleted via a reboot
- Updated: Display refreshing optimized to reduce overhead
- Updated: Newer version of madExcept exception handler
- Updated: Differences window provides progress info
- Fixed: Was not allowed to choose roaming folder for profiles if no access to program folder
- Fixed: Drive hardware serial profile settings were not being saved
- Fixed: Lock-up when testing FTP if it needs to reconnect with different settings
- Fixed: Skip and Exclude is not allowed if file and folder selections are disabled
- Fixed: Skip and Exclude was not shown in drop-down Action menu in Differences window if it was already selected
- Fixed: Dropping files and folders onto main window on Vista and newer
- Fixed: On pre-Vista versions of Windows it will attempt to update imported schedules so they use the correct program path and working directory
- Fixed: Profile run on login setting can now exported and imported and copied from other profiles
- Fixed: Will automatically retry UTF8 encoding if login fails for FTP/SFTP server (as username or password may be Unicode)
- Fixed: Detects if FTP server has truncated directory listing
- Fixed: Records error if SFX Zip file is too large to be executed by Windows
- Fixed: When importing profiles with schedules created by administrators it will now import the schedule instead of giving access denied error
- Fixed: Profiles run unattended, e.g. via scheduler, did not run
- Fixed: Changes to support screen readers
- Fixed: Default colours setting now applied to all windows
- Fixed: Was giving access denied errors instead of folder not empty errors
- Fixed: NTFS blocked files in destination were getting current date & time for last modification when versioning used
- Fixed: If EXE had expired (not same as trial period expired) was not uninstalling everything
- Fixed: The users chosen font is now used in the profile configuration window
- Fixed: Default location labelling when new profile wizard completed early
- Fixed: Showing shortcut keys in Chinese translation
- Fixed: Filters not prefixed with *\ if starts with question mark
- Fixed: Was creating empty folders even when set to delete all empty folders
- Fixed: Pop-up menu on Differences window now hides menu items that cannot be clicked because nothing has been selected
New in SyncBackPro 5.11.3.0 (Mar 21, 2011)
- Fixed: Silently fail did not work in some situations
- Fixed: Crash at startup if two or more profiles have the same hot-key
- Fixed: Sometimes did not email log if profile was aborted
- Fixed: Reverts to default filters when only have one filter and change it to a filter that is incomplete and is auto-corrected
- Fixed: Conversion of DOS filters to regular expression filters, also stopped forcing double backslash to beginning of reg expr filters
- Fixed: Wrongly says trial has expired if entering full Pro serial number (no problem if upgrade serial) and have a registered version of SyncBackSE installed
- Fixed: Some email script functions did not work
- Updated: German translations (thanks to Sascha Brathe)
- Updated: Spanish translations (thanks to Jordi Rodellar)
- Updated: Very rare exception related to GetProcessImageFileNameW
- Updated: The help section on regular expressions has been changed
- Updated: Help file
New in SyncBackPro 5.9.4.0 (Nov 25, 2010)
- Fixed: Wrongly stated cannot use compression if backup to Zip files on FTP and set to delete destination only files
- Fixed: Copying some locked files to FTP may fail in rare cases
New in SyncBackPro 5.9.2.8 (Aug 10, 2010)
- Updated: Split single Zip file upload to FTP/SFTP improved to reduce renaming steps
- Updated: Retries when renaming file on FTP server and FTP server says file is locked
- Fixed: When using IMAP for backup to email may have not ignored deleted emails
- Fixed: Exception when profile set to detect changes and file selections are disabled
- Fixed: Path not found error when copying from shadow volume and using ExtremeCopy
- Fixed: Deleting files on FTP server when server disconnects during delete
- Fixed: When transferring several tens of thousands of files from FTP server one file may fail to transfer
- Fixed: When set to delete all files on folders on FTP server it sometimes (rarely) wrongly reports that it was not able to
New in SyncBackPro 5.9.1.11 (Jun 7, 2010)
- Updated: Italian and Dutch translations
- Updated: Refined change detection for files when profile set to run on change
- Fixed: Error in Swedish translations causing a crash
- Fixed: Network login failure
- Fixed: Naming destination versions wrongly when using multi-zip compression
- Fixed: Restoring versions on FTP when versions stored in root folder and folder where file is restored to does not exist
- Fixed: Sometimes not deleting old versions when using FTP and multi-zip
- Fixed: FTP filename translation with trailing spaces
- Fixed: Sometimes failing to unzip files when restoring from multi-zip on FTP
- Fixed: No longer uses fast scanning method on Windows 7 as incompatible with some NAS devices
- Fixed: SFTP current directory can be wrong when reconnecting
- Fixed: Ignores CRC32 hash values from Serv-U if hash value is not 8 digits long
- Fixed: Sometimes creating root folder in sub-folders in FTP
- Fixed: Maximum compression encryption password length is 79 characters
- Fixed: Entering some Unicode characters into input box dialogs
- Fixed: Importing profiles which have Unicode names that may be regarded as corrupted
- Fixed: Using wrong filename when doing external program open or comparison with a version of a file
New in SyncBackPro 5.9.0.13 (Mar 17, 2010)
- New: ExtremeCopy option to improve performance when copying large files (100MB plus)
- New: Option to ignore email delete failures on Fast Backup profiles when not a rescan
- New: Profile can be automatically exported and added to root folder of CD/DVD/ISO
- New: Many SyncBackSE program settings automatically imported when SyncBackPro first run
- New: CompareFilenames and SameFilenames script functions
- New: Much faster expressions filtering which will reduce profile run time
- New: Much faster file verification with large files (6MB+) when copying from filesystem to filesystem and different physical drives
- New: Much faster file hash comparison with large files (6MB+) when copying from filesystem to filesystem and different physical drives
- New: -procpriority command line parameter
- New: �YOFQUARTER% and %WEEKOFQUARTER% variables
- New: d@...% to read from 64-bit registry on 64-bit versions of Windows and 32-bit registry on 32-bit versions of Windows
- New: Can set the number of log files to keep on a per-profile basis
- New: Can stop an individual profile without stopping all the other profiles in the group
- New: Finnish translations by Jarkko Mäkineva
- Fixed: SendResultViaTwitter script updated to avoid duplicate tweets being ignored
- Fixed: Copies directory creation date and time, and if hidden, to CD/DVD/ISO
- Fixed: NTFS permissions were not being copied to UNC paths (was broken in V5.8.7.23)
- Fixed: Socket timeout error when sending email using SSL on Windows 7
- Fixed: Stop All Profiles will now stop profiles passed on command line still waiting to be run
- Fixed: Double warning about Zip encryption password change
- Fixed: Folder icon and icon for files with no extension now shown correctly on Vista and Windows 7
- Fixed: Stop profile names that are too long for filesystem
- Fixed: Tray hint text no longer truncated if too long
- Fixed: Source and Destination labels when aborting New Profile wizard early
- Fixed: Stack overflow and crash in cases where copying file and cannot get attributes of file to be replaced
- Fixed: Sometimes emailing previous log file if profile aborted due to timelimit
- Fixed: Detects FTPshell servers automatically so uses plain LIST command
- Fixed: Error dialog from Windows 7/Vista when choosing files and folders and disk/card not in drive
- Fixed: Was naming versions files wrong if profile previously used compression but no longer does
- Fixed: Sibling groups not started automatically if previous group profile set to run in parallel
- Fixed: Text log was not including total number of bytes copied, moved, or deleted
- Fixed: Restore wizard updated to not be confusing when restoring to FTP, script, email, etc.
- Fixed: Correctly handle linguistically identical filenames which are not ordinally identical
- Fixed: Records error when FTP server has case sensitive filesystem and there are files/folders with names that differ only in case
- Fixed: If profiles stored in a junction point then junction point not deleted when renaming, copying, or importing profiles
- Fixed: Was not copying from shadow volume with multi-zip compression when profile configured to only use shadow volume
- Fixed: Access Denied exceptions and other problems when INI settings files are hidden
- Fixed: Comparing shortcuts when shortcuts are automatically updated
- Fixed: About window does not fade in if using Windows Terminal Services
- Updated: FullBackup is no longer read-only
- Updated: If using hashing to compare files for differences, and cannot hash a file, then now will be treated as different instead of just recording an error
- Updated: An FTP URL can be used in the FTP hostname field (wizard and profile setup)
- Updated: Schedule window shows SyncBack error description for Status
- Updated: Dutch, Swedish, Portuguese, Japanese, Spanish, Chinese, Norwegian, French, and Catalan translations
New in SyncBackPro 5.9.0.1 Beta (Jan 29, 2010)
- New (Pro): ExtremeCopy option to improve performance when copying large files (100MB plus)
- New (Pro): Option to ignore email delete failures on Fast Backup profiles when not a rescan
- New (Pro): Profile is automatically exported and added to root folder of CD/DVD/ISO
- New: -procpriority command line parameter
- New: �YOFQUARTER% variable
- New: Can set the number of log files to keep on a per-profile basis
- Fixed: Socket timeout error when sending email using SSL on Windows 7
- Fixed: Stop All Profiles will now stop profiles passed on command line still waiting to be run
- Fixed: Double warning about Zip encryption password change
- Fixed: Folder icon and icon for files with no extension now shown correctly on Vista and Windows 7
- Fixed: Stop profile names that are too long for filesystem
- Fixed: Tray hint text no longer truncated if too long
- Fixed: Source and Destination labels when aborting New Profile wizard early
- Fixed: Stack overflow and crash in cases where copying file and cannot get attributes of file to be replaced
- Fixed: Sometimes emailing previous log file if profile aborted due to timelimit
- Fixed (Pro): SendResultViaTwitter script updated to avoid duplicate tweets being ignored
- Updated: An FTP URL can be used in the FTP hostname field (wizard and profile setup)
- Updated: Schedule window shows SyncBack error description for Status
- Updated: Dutch, Swedish, Portuguese, Japanese, Spanish, and Chinese translations
New in SyncBackPro 5.8.6.1 (Oct 27, 2009)
- Fixed: Various and random crashes related to memory issues
New in SyncBackPro 5.8.5.0 (Oct 23, 2009)
- New: Backup to multi-zip files on FTP
- New: Support for LZMA compression format (compatible with WinZip 12)
- New: Example script OnlyYesterday
- New: Support for FTP proxy type used by McAfee Web Gateway (formerly Webwasher)
- New: Support for UTF8 storage of filenames in Zip files (compatible with WinZip 12)
- New: Can now view all the logs in a group
- New: On Vista or newer pop-up balloon appears if scheduled profile failed to run due to wrong password
- New: Warning if exiting and have profiles set to run on logoff
- Fixed: CD/DVD burning now works on Windows 7
- Fixed: Text log file now includes total kbytes copied and deleted
- Fixed: Delay after resuming from hibernation/sleep now applies to when periodic profiles are run after waking computer
- Fixed: Some pop-up menus were not translated on Vista or newer
- Fixed: Keep window on top of all others option in Differences window now works as expected
- Fixed: If using FTP server then FTP server is scanned first so filename case from FTP server is used
- Fixed: File and folder selections are refreshed to use the case when viewed
- Fixed: After Differences window is displayed the network is tested to see if a reconnect is required, if so auto reconnects
- Fixed: Sometimes failed to create versions base folder with FTP
- Fixed: Occasional access violation (at address 00540D9A)
- Updated: Automatically stops using ALLO (allocate) command with FTP servers if they do not require it
- Updated: How network connections are made
- Updated: Dutch translations
- Updated: Help File
New in SyncBackPro 5.7.5.34 (Sep 24, 2009)
- Fixed: Manifest file changed to stop Windows XP SP1 and SP2 crashing
New in SyncBackPro 5.7.5.33 (Sep 22, 2009)
- New: Backup to single Zip file on FTP server
- New: New variables
- New: Can specify email encoding method for header and body
- New: -noprofbackup command line parameter
- New: Option to skip offline files
- New: Last Scheduled Run Error column
- New: RunPreCopyCheck run-time script function
- Fixed: SMART check takes into account Seagate drives record seek error rate differently
- Fixed: With SFTP now returns size of target file and not symbolic link file
- Fixed: Burning to rewritable disks sometimes failed because it would not span more than one disk
- Fixed: Burning to CD/DVD with multi-zip compression may sometimes get file not found errors
- Fixed: Sometimes might miss a drive insert immediately after a reboot when set to run on login
- Fixed: Updated manifest file so compression (and profile export and import) works when run from external drives
- Fixed: Reduced CPU usage when sending and receiving email and burning to CD/DVD
- Fixed: Was not using VSS with Windows Explorer file copying method on Vista or newer when file locked
- Fixed: Sometimes VSS would fail with Windows 7 and give an "Unknown error." error message
- Fixed: Problems with FTP servers, e.g. LiveDrive, that do not like trailing slash when creating directories
- Fixed: Problems with some FTP servers not liking absolute paths when creating or deleting directories
- Fixed: Was not deleting FTP folders that were potentially empty, i.e. only contained files that could be deleted to make it empty
- Fixed: In rare cases some source files sizes may be reported as being twice its actual size
- Fixed: Uses parent group variables now in all cases
- Fixed: Silently fail if source or destination not reachable was not silent
- Fixed: If chose to silently fail on both source and destination then only source was checked
- Fixed: Various minor bug fixes and tweaks
- Updated: Changes to avoid problems with broken SFTP server wrongly reporting directories exist
- Updated: Run Before program now run before shadow volume is created
- Updated: Can use variables for FTP hostname and username
- Updated: Help File
New in SyncBackPro 5.6.0.36 (Jul 20, 2009)
- Fixed: SQLite Error 1 - not an error.
New in SyncBackPro 5.6.0.35 (Jul 20, 2009)
- Fixed: Imported and old profiles had versioning enabled on destination
New in SyncBackPro 5.6.0.34 (Jul 16, 2009)
- Fixed: Imported and old profiles had versioning enabled on destination
New in SyncBackPro 5.6.0.32 (Jul 1, 2009)
- New: RunShowDiffWindow script function call
- New: Proxy support with SFTP
- New: Menu item to import SyncBackSE profiles
- New: CSIDL variables
- New: Option to filter out files Windows itself believes should not be included in a backup
- New: Differences window filter option to just list files to be replaced or delete
- New: Can change serial numbers
- New: Can limit profile run-time
- New: Support for repeating in scheduling for Vista and newer
- Fixed: Was not prompting for CD/DVD when burning to single Zip on CD/DVD
- Fixed: AllDrives script fixed so archive attribute is correctly cleared when safe copies used
- Fixed: Archive and read-only file attributes not cleared correctly when using location script
- Fixed: When using archival fast backup from a script it was incorrectly describing it as backup to the script
- Fixed: New Profile wizard now chooses correct fast backup type when copying from script or email
- Fixed: Some SFTP bugs related to creating, changing, and testing folders
- Fixed: Timeout for FTP connections when there are tens of thousands of files and FTP server has a short timeout
- Fixed: Rare FTP filename parsing problem with an FTP server on some NAS devices
- Fixed: Problem when running a group profile that contains a sub-group that only has one disabled profile
- Fixed: Failing to copy file attributes when using backup file copy method
- Fixed: Exporting or importing profile to or from external drives stopped safe removal of that drive
- Fixed: Shift and PageUp or PageDown now selects a block of files in Differences window
- Fixed: Skip and Exclude for files in folders not yet expanded in file and folders selection tree
- Updated: Embedded database engine updated to improve performance
- Updated: Support for SOCKS5, SOCKS4, SOCKS4A, and HTTP proxy servers with FTP, FTPS, and SFTP
- Updated: Added PGPWDE01 to default exclusion filter
- Updated: Max filename length when using Zip reduced to 512 characters to reduce memory usage
- Updated: Can use Windows environment variables for On Insert settings
- Updated: Many edit controls now support dropping a filename or folder onto them
- Updated: Run Before and Run After date and time variables now expanded to the current date and time
- Updated: Log file now shows if fast backup was a full-backup/rescan
- Updated: Log file shows recent FTP communication history when there are errors
- Updated: SyncBackSE can export all profiles for SyncBackPro to import even if expired
- Updated: Japanese translations
- Updated: Chinese translations
- Updated: Help file now includes a glossary and a new introduction page
- Updated: Extensive screen shot updates and text corrections to help file
New in SyncBackPro 5.5.0.9 (Apr 29, 2009)
- New: Option to always calculate hash values for file comparison
- New (Pro): Two new script functions to let scripts add attachments to log email
- Fixed: File modification date and time problem with WinSSHD SFTP server
- Fixed: Cannot open zip file. (503) error when doing automatic profile backup
- Fixed: Last Result was wrongly set to Aborted if empty differences window shown and profile configured not to show empty diff window
- Fixed: Choosing email folder with backup to email
- Fixed: Versioning for multi-zip
- Fixed: Deleting files to make a folder empty when using wildcards
- Fixed: Window positions on multi-monitor setups
- Fixed: Shared profile settings corrupted when profiles run in parallel that use same shared settings
- Fixed: Alternative path button causes crash if path has invalid colon character in filename
- Fixed (Pro): Script functions DecryptFile and EncryptFile no longer change the files last modification date and time
- Fixed (Pro): Script functions with ByRef (out) parameters
- Updated: Dutch translations updated by Sander Lambregts
- Updated: Automatic filename translation for FTP can be switched on or off (used to be on always)
- Updated: If a files last mod date and time cannot be retrieved then an empty date and time is used instead of ignoring file
- Updated: SyncBack variables, e.g. %_Source%, can now be used in custom log email body
- Updated: Can now revert to factory settings for filters
- Updated: Help file
New in SyncBackPro 5.4.0.7 (Apr 17, 2009)
- New: Versions folder can now be a single sub-folder of the base folder instead of in each folder
- New: Option to Skip and Exclude files and empty folders in Differences and File Collision window
- New: Option to automatically close the Differences window if it is empty (due to filters)
- New: Script to send a Twitter message after a profile run
- Fixed: Show previous details of the files checkbox in Differences window is now disabled until a file is clicked
- Fixed: Detecting changes on a removable drive after removed and re-inserted
- Fixed: Can now safely remove external drives when being watched for changes
- Fixed: Was not silently failing when asked to if source and/or destination cannot be accessed
- Fixed: Was not using user defined profile variables in source and destination with filters and file and folder selections
- Fixed: Was creating all the folders on the last disk when burning to CD/DVD or creating ISO
- Fixed: Bug when downloading files with in their filename
- Fixed: Cannot write to zip file. (507) error when using UNC path for Zip file
- Fixed: With SmartSync profiles it was sometimes creating empty folders when it should not have
- Fixed: Can now use ^ in regular expressions
- Fixed: Any file information changes made in the call to RunBeforeFileCompare were being ignored
- Fixed: Not deleting expired versions when using a location script
- Fixed: Several issues relating to restoring from CD/DVD backup
- Fixed: Access violation in some cases when using private key with SFTP
- Fixed: Permission denied errors when creating folders with the SFTP server freeFTPd
- Updated: A version of a non-existent file can now be restored and copied/moved in one step
- Updated: Windows Event Log not used by default (for new installations)
- Updated: Prompt for shutdown/restart decision done before profiles are run instead of after
- Updated: Help file