Paessler SNMP Tester is a program which will help you to test and debug SNMP requests.
With Paessler SNMP Tester you can run simple SNMP requests against a device in your network. During the test each single step of the SNMP request is logged into a logfile for analysis.

The idea of this free program is to debug SNMP requests down to the protocol level in order to find communication and/or data problems in SNMP monitoring configurations.

Just follow these simple instructions:
· Download Paessler SNMP Tester and run the snmptest.exe file.
· Enter the IP address of your device and select the SNMP port and the SNMP community string.
· Select a request type: (a) MIB2 Interface: Reads the traffic counter of a port according to the MIB2 OID (b) Custom OID: Enter a custom OID value to access any OID value on the device (c) Device Uptime: Reads the standard system uptime value from the device
· It may be necessary to select a specific local IP for the SNMP request (usually only necessary for multi homed systems)
· Click on "Run Test" to start the testing process.
· During the test you will find detailed information in the logfile window.