Psk Scope 2.00

An interface control program for the Psk Meter signal sampler
Psk Scope is an interface program for the PskMeter by KF6VSG. Psk-31 and Psk-63 transmitted signals can be monitored for quality and power output. PskScope can also be used to provide real time control over the transmitted signal level.

If a Psk Meter is connected to a serial port and powered up the program will automatically find the correct serial port and connect to the Psk Meter device.

If no Psk Meter is found, the program will display a warning dialog, but the program may still be used for simulations.

Simulation mode allows the amateur operator to see the effect of overdriving a signal on spectrum, IMD, and RMS error. After using this program in simulation mode you will be convinced of the importance of on-line monitoring.

Clean PSK signals are fully within the capability of every modern transceiver and should be the goal of every PSK operator.

Give Psk Scope a try to see what it's all about!

last updated on:
November 16th, 2009, 15:21 GMT
file size:
853 KB
developed by:
Dave Freese
license type:
operating system(s):
Windows XP / 7
C: \ Science / CAD


In a hurry? Add it to your Download Basket!

user rating



Rate it!
2 Screenshots
Psk Scope - This is the main window of Psk Scope that allows you to access all the features of the application.Psk Scope - From this tab of Psk Scope you'll be able to set the configuration of the application.

Add your review!