Amp Editor Changelog
What's new in Amp Editor 1.3.1
Apr 9, 2014- New Feature:
- The digital input sensitivity of XMV amplifiers can now be changed in the "Device Properties" window. However, the XMV firmware version must be V1.20 or later. The XMV firmware is included in the downloaded zip file.
- Fixed Bug:
- Fixed the problem that had caused the index units in the Meter display of a list window created in the "System View Creator" dialog box to be displayed according to the setting in the TXn "Preference" dialog box, regardless of the model.
New in Amp Editor 1.3.0 (Sep 18, 2013)
- New Features:
- The following models are now supported. It is possible to use Amp Editor to monitor and control XMV series units. However, the XMV firmware version must be V1.12 or later.
- XMV4140
- XMV4280
- XMV8140
- XMV8280
- XMV4140-D
- XMV4280-D
- XMV8140-D
- XMV8280-D
- It is now possible to turn off the Auto IP Address Assignment function.
- Fixed Bugs:
- Fixed the problem in which the "Output level too high" alert enable/disable check box for the PC-N and Tn series was not shown in the "Alert Setup" dialog box, preventing this setting from being made.
- Fixed the problem in which the "Preference" dialog box "Peak Hold" check box and "Enable Level Meters check box settings were not linked with the settings of the Device Detail View context menu.
- Fixed the problem that had caused the channel name display to be blank in the Rename Label menu of the Tree View window when opening a project file to which any channel name was assigned.
- Fixed the problem that had caused the meter display not to be cleared correctly when the system was taken offline while meters were displayed.
New in Amp Editor 1.2.1 (Jul 23, 2013)
- New Features:
- (TXn only) Added Partial Lock in the “Utility” dialog box -> [Setup] tab -> [Front Panel Operation] -> [Panel], enabling locking of panel operations other than mute, attenuation, and library recall.
- Improvement:
- The library items for the third-party speakers are now available in the Speaker Processor component library.
- Fixed Bugs:
- Fixed a problem in which the IP address for the device(s) may not have been assigned, when "IP Address Mode" was repeated and changed using the [DHCP] button and the [MANUAL] button of the "Network Setup" dialog box.
- Fixed a problem in which the project could not be saved (over written) when the project file icon was double-clicked and the Amp Editor was started.
- Fixed a problem in which the Amp Editor was terminated in a situation when the power of the device was quickly turned off and on when the Amp Editor was online.
- Fixed a problem in which the ID may be displayed with "the right value+1" in the scene list of the "Scene Link Manager" dialog box.
- Fixed a problem in which the short-cut key [Ctrl]+[N] was active when online.
- Fixed a problem in which parameters of the controls in a custom control panel may not reflect a scene recall.
- Fixed a problem in which the Amp Editor was frozen when the power of all devices were turned on again after being turned off while the “Device Information” dialog box was displayed.