What's new in Axon Test 4.3.2.3
Sep 1, 2017
- The command window now displays a new output command tab, which brings the output signals configured in a Modbus master, a DNP4 master, or a 104 master. This new tab is divided into two sections, one for the Digital outputs and another for analog outputs.
- DNP3 slave can now simulate Binary Output Status and Analog Output Status signals. These are within the categories of digital inputs and analog inputs respectively.
- Slave and Master IEC-60870-5-104 implement the 2006 version of the protocol standard.
- Slave IEC-60870-5-104 allows to simulate new data types: Normalized Measurements without Quality and Bitstring. It also allows to execute Bitstring commands (associated with analog signals whose data type is Bitstring) and Regulating commands (associated with analog signals whose data type is Step Position) sent from a Master.
- The advanced command interface for IEC-60870-5-104 master devices now has new commands: Start_DT and Stop_DT, Test Command and Reset Process Command.
- Modifications in the advanced command interface for DNP3 master devices.
- The output signals of the IEC-60870-5-104 and DNP3 slave devices have a "Select Required" parameter. If this is enabled, it indicates that it is necessary to receive a Select command before accepting an Execute / Operate command.
New in Axon Test 4.1.2.2 (Feb 1, 2017)
- IEC 60870-5-104 Slave Step Position was changed to Analog Input.
- Improvement in edition and validation of OPC items and features.
- OPC Server implementation.
- Minor bugs fixed and performance improvement.
- IEDs creation without default signals
New in Axon Test 4.1.2.0 (Sep 6, 2016)
- New file-based license process
- Option for creating Slave IEDs with mapping template o without template
- Improvements and fix bugs on IEC 608705101
- Improvements DNP3 Master/Slave
- Fix bug OPC Client in synchronization tags
New in Axon Test 4.0.2.3 (Sep 6, 2016)
- Modbus Slave can send coils with item 0
- Optimization IEC103 master protocol.
- Optimization DNP3 master protocol
- Adding OPC Client
- Modbus allowed index signals that start from 0.
- Optimization 101 and 104 protocol
- USB Dongle license supported
New in Axon Test 4.0.1.31 (Jan 28, 2016)
- Enable and disable auto simulation option in runtime for all the slave devices.
- Improvements to the library DNP3 Master Slave and Supports DNP3 Secure
- Authentication.
- Crash about one specific data conversion in IEC104 Slave fixed.
- Bug which does not assigned 2 registers to Float, Int32 and UInt32 data in Modbus Slave was fixed.
- Malfunction about freezing of the interface when the Modbus Slave is disconnected in the serial port was fixed.
- New state in the icon of devices which indicates connection attempts
- Issue about recognize the Holding
- Register Mapping was fixed
- Removal of unnecessary properties of the devices
- Bug which sometimes did not show the signals in the viewer fixed
- Error in which to send avalanches, the timestamp was ignored in the signals was fixed.
- Several Axon Test are allowed to open at the same time by the licensed application
- Random time in signals auto simulation
- Prefix parameter removed when renaming of the devices
- Error which replicated the extension in the filename when choose save as and rewrite an existing configuration file was fixed
- The TCP Server and TCP Client messages are printed in the language of the application
- Crash when removing devices was fixed.
- Cyclic general interrogation for IEC101 Master
- Resize the columns size according their content
New in Axon Test 4.0.1.0 (Oct 20, 2015)
- Improved standard trace with filters for layers for all protocols
- IEC 60870-5-103 Master Protocol added (beta).
- New user graphical interface
- Improvements in the DNP3 Library
- Implementación de herramienta para animación de mímicos.
- New animation mimic tool
- Allows to save the last values of the signals simulation in slave protocols
New in Axon Test 3.8.1.31 (Jul 14, 2015)
- Icons were added in categories of IEC-60870-5-101 Master.
- Auto simulation of ¡§Step Position¡¨ signals in IEC-60870-5-104/101 Slave.
- The timestamp of the system is send to signals which are changed by hand in the viewer of signals window.
- The Modbus Slave replies with error codes to direct requests not mapped.
New in Axon Test 3.8.1.22 (Jul 1, 2015)
- The format and extension of the projects saved was changed.
- DNP3 Serial Slave was included.
- New “IP Scanner” tool was implemented.
- Group 0 in DNP3 was added by implementing the 242 and 243 variations.
- Bug fixed in IEC 60870-5-101 Master which did not allow cloning and removing signals.
- Bugs fixed in graphical interface of Serial Terminal.
- Problem of DPN3 which did not allow responses of the general interrogation in more than one fragment was resolved.
- The values of the commands in Modbus Master were limited according data type.
- Correction of cloning in all the protocols which did not allow to copy some specific data.
- Bug fixed which did not allow to validate the second time.
- Bugs fixed in the tools TCPServer and TCPClient.
- Bug fixed which did not allow to remove filters field of the Viewer when they were selected with “Items Range”.
- Bug fixed in cloning of devices which generated repeated names.
- The buttons of the commands were disabled by two seconds to avoid blockage in much followed commands in DNP3 Master Protocol.
- Error fixed in IEC-60870-5-104 Master produced by Timeout1.
- Bug fixed which block the application when devices were removed after they were in execution.
- Bug fixed in DNP3 Master and Slave in serial communications which did not allow to see the traces in the Trace window when it were stopped and executed for second time.
- Bug fixed in IEC-60870-5-104 Master and DNP3 Master which sent signals of configured commands to the Viewer Window.
- Bug fixed in DNP3 Slave which did not allow to auto simulate signals in “Increment” and “Decrement” mode.
- The Trace window was enabled by default as initial window.
- Bug fixed in DNP3 Slave produced by execute a device and immediate create a new project.
- Execution improvements and correction of error in texts.
New in Axon Test 3.6.1.25 (Jul 1, 2015)
- Bug that not allowed disconnect a Modbus slave device was fixed.
- Bug Fixed in Serial Terminal at save the project.
- Improvement in Serial Terminal. A Terminal server and client TCP was added. Functionality to see the information in Hexadecimal or text format.
- Validations de ASDU Addres y ASDU Addres Size in IEC104 Master, IEC104 Slave, IEC101 Master e IEC101 Slave.
- ASDU Address and ASDU Address Size validations in IEC104 Master, IEC104 Slave, IEC101 Master and IEC101 Slave.
- IEC 60870-5-104 Slave accepts general interrogation command by groups.
- Bugs fixed and improvements in DNP3 Slave Library
- Allows sorting the numeric values columns of the Viewer in ascending and descending order.
New in Axon Test 3.6.1.8 (Jul 1, 2015)
- Serial terminal tool was added.
- The operation of self-simulation in DNP3 Slave was improved.
- Reorganization of drivers for better performance.
- Signals viewer improved.
- New functionality for sending multiple changing signals in a configurable time for the DNP3, IEC60870-5-101 e IEC60870-5-104 protocols slave.
- Function copy text in the Trace window was enabled.
New in Axon Test 3.5.1.35 (May 11, 2015)
- Addition commands type: PulseOn, PulseOff, LatchOn, LatchOff, Trip/Close.
New in Axon Test 3.5.1.34 (Apr 16, 2015)
- Bug fixed in Modbus Master Device when a configured signal was not included in a
- Polling.
- Support for cloning multiple devices.
- In DNP3 Master Protocol were deleted commands types not supported at the moment (Clear, Queue, Close, Trip), will be available in the next release.
New in Axon Test 3.5.1.33 (Apr 16, 2015)
- Bug fixed to configure command type in protocols IEC104/IEC101 Slave.
- Bug fixed to send commands short pulse and Long pulse on digital outputs in
- protocols IEC104/IEC101 Master.
New in Axon Test 3.5.1.32 (Apr 16, 2015)
- Editor support for ordering signals by columns.
- Signals editor remove support through the keystroke SUPR-DEL.
- Multiple columns paste support in the Signals Editor.
- Validation of values in unfolded data in combobox controls of the properties window.
- Validation of numeric items in the signals edition.
- Validation of unique names and prefixes in the devices.
- Creation of automatic connections for cloned devices.
- Addition of filters: “Not Filter” and “ALL” (which searches in all the columns)
New in Axon Test 3.5.1.25 (Apr 16, 2015)
- The unsolicited events were enabled by default in DNP3 Slave and Master.
- The trace window was removed from the not used options.
- The Binary Data Type configuration field at IEC104 Master and IEC104 Master
- was removed.
- Modbus Slave reconnection support.
- Bug that appears when changing the device name fixed.
- About updated.
- DNP3 Slave bug fixed in self simulation with random function.
- Signals editor exception that appears when deleting a device.
- New option button “New Project”.
- Trace improvement (idented frames, folding and unfolding frames information, browser, visualization of line index).
- Columns paste improvement on the signal mapping tables.
New in Axon Test 3.5.1.9 (Apr 16, 2015)
- Bug fixed in Modbus Master/Slave trace for address greater than 32767
New in Axon Test 3.5.1.8 (Apr 16, 2015)
- Support for auto-simulation of Modbus Slave Protocol
- Crash fixed when Modbus slave is stopped
- Crash fixed when writing manually of a signal from properties panel
- Change About message error
New in Axon Test 3.5.1.7 (Apr 16, 2015)
- Functionality that allows forcing the state of a signal manually on the Viewer.
- IEC-60870-5-101 Slave added.
- English/Spanish User Guide was included.
- Bug Fixed in the trace of IEC-60870-5-101 protocol.
- Bug Fixed in the animation connection icon in the IEC-60870-5-101 Slave.
New in Axon Test 3.4.1.0 (Apr 16, 2015)
- Modbus Slave added
- Licenses code generation updated
- Advanced filters update for the signal viewer service.
- Read of Modbus registers with data type Int32 was fixed.
- Columns paste function in the signal editor windows was fixed.
- Bugs fixed in commands of type Measured
- Normalized in IEC 60870-5-104.
- Signals edition window in read mode for the device in execution.
- The default name of the archive generated at save the information of the signal viewer was changed.
- Modbus protocol trace improvements.
- Bugs were fixed in validation of signals which don't belong to a Modbus protocol polling configuration.
- Hide columns function which just belongs to the signals viewer, in the signals edition window.
- Bugs fixed in the command “general interrogation” in the DNP3 Slave protocol.
- Auto simulation update in the DNP3 Slave.
- DNP3 Master/Slave Trace update.
- Bug fixed at the beginning when a FTP server of updates is not found.
- Support for configuring by default the last device executed in the command window.
- Update of Automatic assignation of ports of the slave devices in the DPN3 and IEC 60870-5-104 protocols.
- Unnecessary configuration fields in the DNP3 Slave were deleted.
- New filter in the signals viewer. Filtering by range of items.
- Timestamps of the system and of the protocol distinction in the signals viewer (the system timestamp are shown with the prefix *)
- Modbus master protocol update in terms of self-generated signals not mapped by the user.
New in Axon Test 3.3.1.6 (Apr 16, 2015)
- Licenses update.
- Advanced filters for the signals viewer service were added.
New in Axon Test 3.3.0.7 (Apr 16, 2015)
- Internationalization support (English/Spanish) for the windows: signal editor, command window, viewer and splash.
- Response to commands in the IEC-60870-104 protocol.
- The “delete tags” option was disabled when the device is in runtime mode.
- Change of name generator at cloning a device.
- Bug fixed in the IEC-60870-104 protocol happened when starting and stopping in turn the execution of a device.
- Automatic port generator in slave devices.
- Enumeration of rows in the signal editor.
- Sequence Toggle Operator for digital signals self-simulation in the IEC-60870-5-104 Slave protocol.
- Bug fixed in the DNP3 Slave protocol where just connections with IP 127.0.0.1 were allowed.
New in Axon Test 3.3.0.0 (Apr 16, 2015)
New in Axon Test 3.2.0.15 (Sep 13, 2014)
- Support for installation on Windows XP
New in Axon Test 3.2.0.14 (Sep 13, 2014)
New in Axon Test 3.2.0.10 (Sep 13, 2014)
- Adding protocols IEC 60870 - 5 - 101 Master and Modbus Master Optimization for validation process
- Adding the function SAVE in the Viewer window
- Allows importing signals exported from a SICAM PAS configuration to IEC 60870 - 5 - 101 Master and IEC 60870 - 5 - 104 Master.
- Counter for the signals displayed in the Viewer window.
- View changes to the signals shown in the Viewer.
- Allows to sort the information in the Viewer either alphabetically or by columns.
- Implementation of filters on the information displayed on the Viewer.
- Allows cloning mapped signals in manual mode and automatic mode.
- Improvement in the Trace protocol Master DNP3.
- Allows you to filter the information of the Viewer by signals mapped.
New in Axon Test 3.0.2.2 (Sep 13, 2014)
- Including Protocols, IEC 60870 - 5 - 104 (Master/Slave) and DNP3 Master