What's new in DataExplorer 3.8.6
Apr 12, 2024
- Generic changes/fixes:
- Fix startup problem after clean new install
- Device specific changes/fixes:
- HoTTAdapter* - *.log reader, use block sequence number to track log time step
- PeakTech* - correct device XML names
New in DataExplorer 3.8.1 (Oct 25, 2023)
- Generic changes/fixes:
- Export CSV following zoomed data range
- Add two point measurement method to calculate value average and median
- Fix raw export time stamp
- Fix CSV export header line according configured time stamp
- Adjust possible triangle altitude according maximum altitude of flight
- Update Java runtime to 17.0.8 if packaged
- Device specific changes/fixes:
- IGCAdapter - fine tune mysterious value deviations which get logged
- IGCAdapter - enhance traces with speed values with and without index, glide ratio
- iMax B8+ - add device from SkyRC
New in DataExplorer 3.8.0 (Sep 19, 2023)
- Generic changes/fixes:
- While installing on Windows register MIME type can be skipped
- Fix code setting line color from time grid context menu
- Check Junit HistoSuite
- Device specific changes/fixes:
- HoTTAdapter* - fix data transfer tab content MacOS
- HoTTAdapter - fix error in history bin reader none receiver data
- iChargerUSB* - fix balancer start configuration capabilities
- IGCAdapter - remove break conditions for big altitude value differences
New in DataExplorer 3.7.8 (Jul 18, 2023)
- Generic changes/fixes:
- Java runtime update 17.0.7+8-LTS-224
- Device specific changes/fixes:
- HoTTAdapter - history analysis *.bin error sensor data fixed
New in DataExplorer 3.7.7 (May 27, 2023)
- Generic changes/fixes:
- Delay update check to make sure UI is set up
- Java runtime update 17.0.6+9-LTS-190
- Device specific changes/fixes:
- Akkumatik - add configuration dialog
- Akkumatik - add help page with short dialog introduction
- GPS-Logger* - correct method comment, add exception log, tolerate wrong position of speed with glide ratio
- OpenTx-Telemetry - update to tolerate Ethos logs
- Snipe - add capability to read Snipe CSV log files
New in DataExplorer 3.7.4 (Dec 19, 2022)
- Generic changes/fixes:
- enable modification of UTC delta value for GPS devices which does not define such value
- make GPX export more tolerant
- update integrated Java runtime to 17.0.5
- fix setRTS(false) while using jSerialComm
- fix freeze while quit with running device thread
- add missing update of port related tool bar and menu while gatherer thread is running
- update cell voltage adjustment dialog
- add module jdk.xml.dom to version where runtime includes to fix MDL Viewer PDF export
- fix statistics description update, clear loading new file
- Device specific changes/fixes:
- Dynamite Passport GPS Speed Meter - add plug-in
- GSM-015 GNSS Speed Meter - add plug-in
- HoTTAdapter* - update error handling live gatherer
- HoTTAdapter* - update GPS detection for SM GPS-Logger & RCE Sparrow/Swift live gatherer
- HoTTAdapter* - synchronize filter with binary parser live gatherer
- HoTTAdapter* - fix several indexing values GAM EAM
- HoTTAdapter - fix VoltageRx_min and TemperatureRx while live-data gathering
- HoTTAdapter2 - enable altitude/climb value sensor by drop down selection live gatherer
- HoTTAdapter2 - add altitude/climb value sensor to record set description
- UT61E - add additional data query to suppress dirty bytes
New in DataExplorer 3.7.3 (Nov 26, 2022)
- Generic changes/fixes:
- Enable modification of UTC delta value for GPS devices which does not define such value
- Make GPX export more tolerant
- Update integrated Java runtime to 17.0.5
- Fix setRTS(false) while using jSerialComm
- Fix freeze while quit with running device thread
- Add missing update of port related tool bar and menu while gatherer thread is running
- Update cell voltage adjustment dialog
- Add module jdk.xml.dom to version where runtime includes to fix MDL Viewer PDF export
- Fix statistics description update, clear loading new file
- Device specific changes/fixes:
- Dynamite Passport GPS Speed Meter - add plug-in
- GSM-015 GNSS Speed Meter - add plug-in
- HoTTAdapter* - update error handling live gatherer
- HoTTAdapter* - update GPS detection for SM GPS-Logger & RCE Sparrow/Swift live gatherer
- HoTTAdapter* - synchronize filter with binary parser live gatherer
- HoTTAdapter* - fix several indexing values GAM EAM
- HoTTAdapter - fix VoltageRx_min and TemperatureRx while live-data gathering
- HoTTAdapter2 - enable altitude/climb value sensor by drop down selection live gatherer
- HoTTAdapter2 - add altitude/climb value sensor to record set description
- UT61E - add additional data query to suppress dirty bytes
New in DataExplorer 3.7.2 (Nov 1, 2022)
- Generic changes/fixes:
- refine ARM processor architecture query
- update patched SWT for Windows 64 bit to have correct visualization below Win10&11 as well as correct function of FileDialog.setFilterPath()
- Device specific changes/fixes:
- HoTTAdapter* - enable HoTTlogReader* inheritance
- iChargerUSB* - fix dynamically setting of timeout in dependency of program memory log interval
- iChargerUSB* - fix wrong memory head index selection
- iChargerUSB* - fix missing update memory configuration dialog switching to Li battery type
- iChargerDX* - support all possible 64 program memories
- iCharger*X* - fix removal of channel modus power setting
- iChargerUSB* - fix missing disable of delete button while BUILD IN memory selected
New in DataExplorer 3.6.0 (May 22, 2022)
- Generic changes/fixes:
- fix trigger analysis while a secondary is defined but no values available
- fix error displaying curve compare while 10 spacings on scale
- fix time error in curve compare displaying curves different size or different time step
- Device specific changes/fixes:
- HoTTAdapter2* - fix visualization of warning in configuration channels, sync with HoTTAdapter*
- HoTTAdapter* - find date and time deviations Sparrow/Swift
- HoTTAdapter* - add extended ESC values (YGE)
- IGCAdapter - add support Swift IGC format
- IGCAdapter - find high deviations in time
- IGCAdapter - add some error handling
- ZeroAdapter - fix StatisticsType.fromString("min=true max=true avg=true sigma=false")
New in DataExplorer 3.5.5 (Apr 7, 2022)
- Generic changes/fixes:
- add Raspbian 64 bit build as compressed ARM tarball
- synchronize record data types with Android version
- update SWT, only 64 Bit will be maintained
- Device specific changes/fixes:
- GPS-Logger3 - reuse ValueCollector to calculate average values at dedicated AirSpeed and TEC pressure
- GPS-Logger3 - update ValueCollector to find avg with equal entry count, remove AirSpeed constrain
- OpenTx-Telemetry - add warning trace log while skipping record set due to less log entries
- Unilog - fix class cast exception
- HoTTAdapter2* - fix *.log parsing channel data
- Graupner UDP40 - fix reading program memories
- Graupner UDP40/45 - fix cell count
- Graupner UDP - remove time criteria of battery history stored within device
New in DataExplorer 3.5.4 (Feb 14, 2022)
- Add support for native USB communication
- Add support for SkyRC MC3000 single cell charger
- JetiAdapter - increase number of initial supported measurements to 50
- ICharger - implemented checksum checking for serial communication
- JetiAdapter - add Rx->Tx time delta statistics (not differentiating over sensors)
- JetiAdapter - fix intermittent find best fit of time step which end up in less display points
- JetiAdapter - fix inconsistent detection of Speed record which leads to unusable color configuration while Google Earth KMZ export.
- HoTTAdapterX - HoTT V2 enable data visualization for external voltage and temperature
- Implement feature request to edit single cell in table
- Fix problem while measuring due to missing scale end value synchronization when scale synchronized measurement visibility toggled
- Fix problem while GPS coordinates are available, but speed record ordinal can not be identified
- Fix CSV export Time unit to [hh:mm:ss.SSS]
- Fix font size dialog while using high resolution
- Swt update to version 4.5
New in DataExplorer 3.5.3 (Jan 21, 2022)
- Generic changes/fixes:
- add base directory to Linux start scripts
- fix a possible error when displaying history graphs calculations with an empty trail record set
- cleanup senseless log level OFF or change to level INFO
- fix grid line alignment error while toggle to 10 grid lines
- update Java version check to allow Java 17
- Device specific changes/fixes:
- Junsi iChargerUSB - add message box signaling timeout while initializing program memories for dialog
- Junsi iChargerDX6,S6 - cleanup duplicated BatteryTypesX definition
- Junsi iChargerDX* - fix partially wrong program memory, PB, Ni* max cells
- Junsi iChargerDX* - update LiHV maximum charging voltage to 4.45 V
- HoTTAdapter*2 - cleanup possible clash AirSpeed Vario, sync update variable Vario/GPS dependencies
- GPS-Logger2/3 - update configuration capability Jeti, MPX, HoTT
New in DataExplorer 3.4.8 (Apr 26, 2021)
- Generic changes/fixes:
- enable record based scale sync property updates (outside device XML)
- Device specific changes/fixes:
- HoTTAdapter* - fix scale synchronization, formatting, unit and factor to support different GPS data source
- HoTTAdapter* - change SM GPS-Logger names from gyro to acceleration
- HoTTAdapter* - change GPS time and year to more readable format
- HoTTAdapter2 - fix parsing altitude,climb values while EAM is configured as primary
- HoTTAdapter2 - fix missing GAM, EAM, ESC parsing while no known GPS is connected
- HoTTAdapter2 - enable simple GPS type detection while reading through 19200 Baud protocol
New in DataExplorer 3.4.7 (Mar 29, 2021)
- Generic changes/fixes:
- Update copyright 2021
- Update dialog sizes to support uneven Windows scaling
- Fix error while editing FileComment tab while focus lost
- Fix error in setting returning initial wrong decimal separator
- Make tolerant missing symbols in OSD (variable measurement size written by Android app)
- Fix scroll problem file comment window record comment table
- Device specific changes/fixes:
- JetiAdapter - fix check GPS data to enable Google Earth export
- IGCAdapter - fix support configuring speed or others in KML/KMZ export
- HoTTAdapter* - fix unit of GPS vibration
- HoTTAdapter* - detecting GPS type to sort and re-name measurements
- HoTTAdapter* - fix missing ESC while importing *.log
- GraupnerUDP* - fix update step charge tabulator
- GraupnerUDP* - fix update step charge min capacity/current
- IGCAdapter - fix loading older OSD file
- IGCAdapter - enable missing color and record dependency configuration
- iCharger* - fix energy calculation
- iChargerDuo* - fix max power setting channel 2
- iCharger206B - add support opening *.lov
New in DataExplorer 3.4.4 (Nov 16, 2020)
- Add support for native USB communication
- Add support for SkyRC MC3000 single cell charger
- JetiAdapter - increase number of initial supported measurements to 50
- ICharger - implemented checksum checking for serial communication
- JetiAdapter - add Rx->Tx time delta statistics (not differentiating over sensors)
- JetiAdapter - fix intermittent find best fit of time step which end up in less display points
- JetiAdapter - fix inconsistent detection of Speed record which leads to unusable color configuration while Google Earth KMZ export.
- HoTTAdapterX - HoTT V2 enable data visualization for external voltage and temperature
- Implement feature request to edit single cell in table
- Fix problem while measuring due to missing scale end value synchronization when scale synchronized measurement visibility toggled
- Fix problem while GPS coordinates are available, but speed record ordinal can not be identified
- Fix CSV export Time unit to [hh:mm:ss.SSS]
- Fix font size dialog while using high resolution
- Swt update to version 4.5
New in DataExplorer 3.4.3 (Oct 12, 2020)
- Generic changes / fixes:
- fix display problem of geo-coordinates in degree curve compare
- update several naming p.e. "TrackAngle"
- KMZ export, remove definition of relative altitude start point out of definition of LookAt
- Device specific changes / fixes:
- OnLineCommander - add initial support
- iChargerUSB - fix some possible exception in charger dialog reading data from connected device
- HoTTAdpter2 * - add missing property reduction / offset to Temperature Rx
- IGCAdapter - fix flight number parsing, parsing F record, record naming
- General changes / improvements:
- Display errors in geographic coordinates in curve comparison solved
- some names adjusted, example "TrackAngle"
- KMZ export, height starting point for the determination of the relative starting height taken from the context of the LookAt calculation
- Device specific changes / improvements:
- OnLineCommander support added
- iChargerUSB - a potential source of errors in the iCharger dialog, which can occur when reading data, prevents
- HoTTAdpter2 * - missing reduction in temperature Rx added
- IGCAdapter - Correction of flight number parsing, error when parsing the F record, missing name adaptation corrected
New in DataExplorer 3.2.4 (Dec 23, 2015)
- add support for native USB communication
- add support for SkyRC MC3000 single cell charger
- JetiAdapter - increase number of initial supported measurements to 50
- iCharger - implemented checksum checking for serial communication
- JetiAdapter - add Rx->Tx time delta statistics (not differentiating over sensors)
- JetiAdapter - fix intermittent find best fit of time step which end up in less display points
- JetiAdapter - fix inconsistent detection of Speed record which leads to unusable color configuration while Google Earth KMZ export.
- HoTTAdapterX - HoTT V2 enable data visualization for external voltage and temperature
- implement feature request to edit single cell in table
- fix problem while measuring due to missing scale end value synchronization when scale synchronized measurement visibility toggled
- fix problem while GPS coordinates are available, but speed record ordinal can not be identified
- fix CSV export Time unit to [hh:mm:ss.SSS]
- fix font size dialog while using high resolution
- swt update to version 4.5
New in DataExplorer 3.2.3 (Dec 23, 2015)
- HoTTViewer - add support to open and display saved OSD-files with Graupner/SJ HoTT Viewer App
- GigaLogger - add support
- Herkules III Telemetry - add support
- HoTTAdapterX - enable live logging (needs device XML to be replaced)
- fix - clean data model while importing CSV where record set number follow channel number
- HoTTAdapter - adapt filter GPS data parsing for import bin log data
- fix - scale number calculation error while display area is greater than 1500 pixels.
New in DataExplorer 3.2.2 (Jul 29, 2015)
- fix exception while record clone operation (cut)
- fix minor errors in automated test
- LiPoWatch - small correction of the serial communication to keep LEDs off
- HoTTAdapter2* - fix error while opening OSD file with channels from earlier release
New in DataExplorer 3.2.1 (Jul 29, 2015)
- add current/voltage smoothing algorithm to be used for very short drop peaks
- enhance device interface for charger to adapt curve smoothing according device needs
- HoTTAdapter* - refine sensor detection - to increase chance not in text-modus segment
- HoTTAdapter* - correct channel time unit to µsec
- HoTTAdapter* - adapt ESC Capacity filter
- HoTTAdapter2* - fix problem missing receiver data not using Channel configuration
- GraupnerUDP* - some adaptations to device internal behavior
- Akkumatik - add support
- HoTTAdapterX - add support with receiver and ESC data, rounds statistics (X-N8, X-4S)
New in DataExplorer 3.2.0 (Mar 2, 2015)
- fix initial synchronization of measurements
- fix Junsi iCharger 206, 208, 306, 3010 constant time step to 2 seconds
- fix problem while copy graphics into clip board several time in sequence
- fix JLog2 context help page selection
- fix JLog2 configuration dialog - set drop downs to editable false since this event wasn't handled and does not activate save button
- fix error not loading color from OSD file some colors (1,1,1)
- CSV2SerialAdapter - fix error handling of missing status
- HoTTAdapter - fix receiver only with channels times 10 error
- HoTTAdapter* - adapt capacity filter according actual power
- HoTTAdapter* - adapt current filter
- HoTTAdapter2* - correct scale sync reference in configuration Channels and SpeedControl
- GPS-Logger* - enable GPX export (Garmin Virb)
- UniLog2 - fix missing parsing of M-Link data
- UniLog2 - fix configuration of symbol and unit for M-Link measurements
- add Junsi iCharger 4010 Duo support (read log from SD storage)
- add port enumeration ttyACM* Linux CDC ACM devices
New in DataExplorer 3.1.9 (Dec 30, 2014)
- enable absolute time for graphics time line
- enable to set the font size of measurement values on digital display
- several processing optimizations
- fix caching algorithm to enable scale text color updated by color change
- fix Linux GTK3 incompatibility by exporting SWT_GTK3=0 in start scripts
- IISI-Cockpit V2 - add statistics definition
- JetiAdapter - fix time step calculation for very short logs in respect of time
- JetiAdapter - fix record naming while repeating measurement names with different sensors
- HoTTAdapter - update HoTTMdlViewer to latest 0.8 snapshot
- HoTTAdapter - fine tune some more filter settings
- HoTTAdapter - add measurement voltage Rx min and make EAM rpm to an extra measurement
- HoTTAdapter2 - fix missing update visibility status while switching record sets in display
- UniLog2 - fix live data gathering capability
- Futaba-Telemetry - fix english device properties file
- OpenTx-Telemetry - add telemetry data support
New in DataExplorer 3.1.8 (Dec 18, 2014)
- fix Kosmik rounding issue
- fix HoTTAdapter text mode initialization
- fix JetiAdapter missed parsing data from sensor without unit
- fix JetiAdapter GPS-Altitude and GPS-Speed detection
- fix time formating in statistics window
- fix GPS-Logger2 speed parsing from SMGPS instead VTG sentence
- JetiAdapter - display events as a curve, repeating events add up the counter
New in DataExplorer 3.1.7 (Sep 19, 2014)
- fix GPXAdapter altitude parsing
- fix IISI Cockpit V2 to tolerate empty values and display a warning message
- fix IISI Cockpit V2 GPS value handling
- fix Futaba-Telemetry number of maximum measurements
- fix HoTTAdapter EAM RXSQ curve parsing correct buffer
- fix Kosmik, missing gear ratio related configuration update
- enable HoTTAdapter* text modus filter configuration
- add Polaron charger support
- add Ultra Quick 70 charger support
- add Ultramat Ac/Dc EQ charger support
- add eStation BC6 80W (BC6dx/Pichler P60 80W) support
- documentation update
New in DataExplorer 3.1.6 (Jul 25, 2014)
- Update to latest SWT drop due to problems reported for Linux
- enable reduced data table by selected records for all devices, enablement via context menu
- add 230400 Baud entry in device properties XSD to enable workaround for Junsi charger at UNIX operating systems
- enable always to left cut and right cut permanent
- display selected measurement values in comment area while measuring
- enable to set record set start time stamp manually
- fix display for GPS coordinates in several tabs
- fix time display in statistics
- update MdlViewer to 0.8
- HoTTAdapter* - detect switching into text modus where no readable telemetry values are available
- HoTTAdapter* - adapt binary log reader to protocol introduced last year to reduce telemetry value errors
- iCharger*B - fix power calculation
- GPXAdapter - fix to tolerate GPX files without extension data
- Kosmik - fix import problem with modified file name
- add iCharger308Duo support to import data from device (actually no support for live data)
- add IISI Cockpit V2 support
- add FutabaTelemetry support
- documentation update
New in DataExplorer 3.1.5 (May 9, 2014)
- update to latest SWT drop due to solved problems reported for Mint-Linux
- tune auto number formatting
- enable optimized data sets load of DataExplorer for Android saved
- osd files
- enable reduced data table by selected records (actually for
- HoTTAdapter* only)
- remove export capability for IGC files (IGC files must be generated
- while data creation and secured)
- HoTTAdapter* - synchronize capacity filter
- HoTTAdapter2 - fix height curve data if overlayed from different sensors
- HoTTAdapter* - optimize import for receiver data only
- HoTTAdapter* - update import algorithm to fit log sensor fingerprint
- of new receivers
- HoTTAdapter* - update filter settings speed
- UltraDuoPlus50/60 - add step charge configuration tabulator
- UltraDuoPlus* - refine several default values depending on capacity
- as well as on charge current
- VC820/VC840 - fix mapping while resistance measurement
- GPS-Logger2 - add support for GPS-Logger2 extended measurement value
- set from SM-Modellbau
- IGCAdapter - update to enable extension data for 4 additional values
- Kosmik - fix initialization error
- documentation update
New in DataExplorer 3.1.4 (Feb 3, 2014)
- update build to make sure compiled classes target 1.6
- update height of device properties editor to enable proper display of scroll bar in channel- configuration tabulator
- enable record color usage configuration for scale, scale numbers and record name
- enable configuration of outlet- configuration name usage in curve compare
- Junsi iCharger - fix data capture capability
- FlightRecorder - fix using name and unit from setup
- HoTTAdapter - fix file transfer count down/up signature
- HoTTAdapter - fix file transfer initial PC folder update
- HoTTAdapter - fix fuel to ml, was fuel level in % (requires manual replacement of device XML if used)
- HoTTAdapter - fix Rx->Tx PLoss first value by setting to 0
- HoTTAdapter2 - add evaluation of EAM RPM (as GAM RPM value)
- UltraDuoPlus - correct several adjustment parameters in viewpoint of range
- 4D-Akkumonitor - correct time calculation, adapt device XML, adapt template XML
- documentation update
New in DataExplorer 3.1.3 (Dec 16, 2013)
- fix bug in clone time steps while time step is constant
- add capability to globally configure time format for table, measurement, start time while zooming/oscilloscope
- add capability to smooth voltage curves to be used if pulsed or similar (result depends on frequency and is actual not adjustable)
- add capability to capture charge cycles in a single record set
- add capability to suppress data collection during pause, balancing if not already done by device
- Scope-Mode - add more entries to enable more flexibility about the view range
- Graphics - enable measurement names in curve color at scale
- Timeline - tick mark correction
- Junsi CellLog 8S - add support
- JetiAdapter - adapt data parser to tolerate string messages like alarm and signal loss (actual written to log)
- LiPoWatch - correct calculation of total voltage
- HoTTAdapter* - add Rx->Tx PLoss statistics
- HottAdapter2 - fix import skipping adding some packages for channel
- UltraDuoPlus* - fix sorting of battery history output
New in DataExplorer 3.1.2 (Aug 26, 2013)
- All devices mainly importing data - write filename after import to record set description
- HoTTAdapter* - fix sensor mash up due to newly introduced sensor scan
- HoTTAdapter* - fix balance calculation while import from bin
- HoTTAdapter* - fix switch off filter capability for current GAM/EAM
- HoTTAdapter* - adapt filter current, allow 255 A max
- HoTTAdapter* - adapt overall filter values
- fix IGC file export error
- JetiAdapter - add import progress display
- Add Ultra Duo Plus 80 (Graupner) dual channel 1000W charger
- Documentation update
New in DataExplorer 3.1.1 (Jul 25, 2013)
- Problem while target reference ordinal of cell voltage is not returned from device
- HoTTAdapter* - adapt GPS filter
- HoTTAdapter* - adapt ESC filter
- HoTTAdapter* - updates for HoTTViewer tab
- HoTTAdapter* - add SD Log version 1 which appears after firmware update MX20
- add Junsi iCharger3010B
- Enable extended special record data types
- Enable device specific data parser
- Add 4D-Akkumonitor
- Update SWT to 4.2.2 final stable release
- Fix import/export of generic CSV data
- Fix statistics value display if trigger configured but no occurrence
New in DataExplorer 3.10 (May 22, 2013)
- add some logs to check UI initialization and check min window size to prevent initialization exceptions
- UniLog2 - fix problem interpreting UTC-offset which does not exist
- UniLog2 - fix problem day skip while reading big data files > 24 hours
- HoTTAdapter2 - correct EAM current
- HoTTAdapter* - update filter settings
- HoTTAdapter* - integrate HoTTMdlViewer
New in DataExplorer 3.09 (May 7, 2013)
- AV4ms_FV_762 - fix problem importing data
- HoTTAdapter*, DataVario*, LinkVario* - fix/adapt UI in combination with new SWT release
- HoTTAdapter* - calculate CRC for mx-21mx16 converter instead of static update
- HoTTAdapter* - adapt data reader *.bin and live data of ESC according firmware update
- HoTTAdapter* - enable MDL Viewer tabulator (requires extra Java archive)
- fix [bug #38250] Feature: Use keyboard for zooming
- fix [bug #38251] Feature: Improved update check
- fix bug - in startup sometimes an error "null" (NullPointerException) occurs
- graphics templates - remove defined end points from graphics templates while potential value end points may outside this range
- UniLog2 - adapt to latest firmware 1.09
- GPS-Logger - adapt to latest firmware 1.10
New in DataExplorer 3.08 (Apr 6, 2013)
- add Renschler Picolario2 support
- add Kontronik Kosmik support
- update SWT to version 4.2.1
- add IGCAdapter support for short naming
- fix bug #38246 - Multiple actions when right-clicking into graphic
- fix RFE #38245 - Allow editing of commentary in table "File comment"
- fix bug #38247 - Progress bar not reset after loading files
- fix RFE #38248 - Feature: Copy function for data table
- HoTTAdapter* - change/correct Rx->Tx-PLoss measurement name
- HoTTAdapter* - change algorithm sending commands during live data gathering
- HoTTAdapter* - update Rx->Tx-PLoss calculation, integrate package loss over 1 second period
- HoTTAdapter* - update to latest firmware (ESC)
- HoTTAdapter* - fix bug in mx-12 mx-16 MDL converter
- Jlog2 - update support firmware 4.0.0
- UniLog2 - analog measurement mapping corrected
- documentation update
New in DataExplorer 3.07 (Feb 13, 2013)
- HoTTAdapter(2) - live data, display detected sensors, optimize performance
- add IGCAdapter - enable import of IGC log files to verify before upload
- add GPXAdapter - enable import of GPX files, analyze geo coordinates as well as other data
New in DataExplorer 3.06 (Dec 19, 2012)
- add JetiAdapter to analyze flight record data from Jeti transmitters
- add AV4ms_FV_762 charger for AA and AAA size cells
- change time line behavior, start showing day > 72 hours
- enable auto-save of a temporary file(s) each 5 minutes
- enable gestures for zooming and panning
- CSV2SerialAdapter - enable file import via menu in parallel to configured serial input
- fix Google Earth export in respect of line gaps due to velocity change
- fix HoTTAdapter data import in respect of rest after telemetry data package loss
- build Windows NSIS installer
- documentation update
New in DataExplorer 3.05 (Oct 22, 2012)
- HoTTAdapter(2) - correct device XMLs to support current related statistics (number motor climbs vs gained height)
- HoTTAdapter(2) - enable filter for current drops to zero above 10A (this hurts statistics calculation regarding trigger usage)
New in DataExplorer 3.04 (Sep 22, 2012)
- JLog2 - establish workaround for maximum recording time of 54 minutes, accept all follow on measurements with a default time step
- HoTTAdapter(2) - add filter methods for receiver data
- HoTTAdapter(2) - add support for motor driver (speed control)
New in DataExplorer 3.03 (Aug 1, 2012)
- Refine import path handling including object selection, refine
- default import path handling for all device importing data
- Fix several reported minor bugs
- Add HoTTAdapterM/HoTTAdapter2M as HoTT device where GPS
- coordinates are logged as decimal degrees instead of degree and decimal
- minutes (Mikrokopter)
- GPS-Logger - update to firmware version 1.07 and supported features
- GPS-Logger - correct unit of receiver voltage (manual delete
- device XML required)
- UniLog2 - update to firmware version 1.05 and supported features
- HoTTAdapter(2) - set "tolerate sign change" to false as default
- Enable menu character accelerator for supporting operating systems
- SWT update to release 3.7.2
- Workaround Linux Unity overlay scroll bar problem
- Documentation update
New in DataExplorer 3.02 (Jul 9, 2012)
- fix performance problem while in zoom mode and update statistics data (big datasets)
- UniLog2 - remove not supported 50Hz logging rate adjustment
- HoTTAdapter(2) - enable serial file transfer
- JLog2 - refine default import path handling
- DeviceProperties_V17 -> DeviceProperties_V18 due to HoTTAdapter(2) device properties changes
- HoTTAdapter - toggle import of channel deflection via device dialog (performance hit, blow up file)
- HoTTAdapter(2) - correct signal strength calculation
- HottAdapter(2) - add support for serial file transfer
- HottAdapter(2) - add support for model data backup
- HottAdapter(2) - add support for simple model data conversion
- HoTTAdapter2 - add channel-configuration displaying all available data including channels
- HoTTAdapter(2) - enable adoption for evaluation of incoming Latitude and Longitude by given unit (MicroCopter, degree vs degree minutes)
- GPS-Logger - use speed data from RMC sentence which contains height difference adapted speed values
- documentation update
New in DataExplorer 3.01 (May 24, 2012)
- fix scale synchronization problem while change zoom
- fix problem zoomed graphics versus table view with lazy update
- fix record length created by regression calculation
- fix problem synchronizing record scales for records with different
- measurement factors
- JLog2 - correct measurement names, and units
- Jlog2 - fix configuration
- JLog2 - fix time step error
- HoTTAdapter(2) - enable GPS data filter access in device dialog
- HoTTAdapter - add channel configuration to display channel data
- update Linux cp210x kernel module for kernel 3.2.0.24
- documentation update
New in DataExplorer 3.00 (Apr 26, 2012)
- reduce scan depth while searching files and directories, OutOfMemory
- with recursive created directories by Wine
- update CSV data parser
- UniLog2 - fix error restart live gathering not possible if stopped
- while dialog is closed
- HottAdapter2 - fix GPS data detection to enable Google Earth
- visualization
- HottAdapter(2) - fix Receiver detection and add data error correction
- HottAdapter(2) - add filter to filter Latitude/Longitude spikes,
- adjustable through device configuration filter_factor
- UniLog2 - live data gathering keep already gathered data in case of
- an error
- UniLog2 - live data gathering enable loop to reset live gathering
- Multiplex FlightRecorder support
- SM Modellbau JLog2 support
- fix error cut curves with constant time step
- fix error open help dialog Linux
- update device properties schema to enable extended configuration
- update device properties editor to reflect schema updates
- UltraDuoPlus 50 - fix error to enable curve recording
- UltraDuoPlus 50 - enable dialog to manage battery memory and retrieve
- battery history
- SWT update to 7.2.2 final
- update Linux cp210x kernel module for kernel 3.0.0.17
- update documentation
- fix copy graphics tab content for MAC OS
New in DataExplorer 2.96 (Feb 27, 2012)
- VC8x0 - add warning message while error limit is reached.
- VC8x0 - refine timeout error handling
- HottAdapter - General-Air-Sensor 115200 protocol, fix several errors
- in value display
- HottAdapter - correct sign of dBm gauge values
- HottAdapter - refine sensor detection while slave modus
- HottAdapter - refine binary log version detection
- HoTTAdapter2 - have all possible sensor values on identical time line
- UniLog2 - make live data gathering more robust
- update Linux cp210x kernel module for kernel 3.0.0.16
- Documentation update
New in DataExplorer 2.95 (Feb 1, 2012)
- HoTTAdapter:
- filter misplaced measurements while loading or gathering data from multiple sensors
- change record set naming and numbering, all of one import starts identical
- adapt to latest firmware version
- make query sensor sequence more efficiency
- enable detection of missed query sensor writes
- 19200 Baud slave-modus, refine error handling while switch sensor/receiver
- fix error removing absolute time stamp while cutting curve from begin
- enable IGC export format while GPS data available:
- for HottAdapter
- for NMEAAdapter
- for SM GPS-Logger
- for WStech DataVario/LinkVario
- VC8x0:
- fix error displaying integer values
- enable changeable time steps value for long term measurements
- Documentation update
New in DataExplorer 2.94 (Jan 12, 2012)
- DevicePropertyEditor - fix out of handles problem
- DevicePropertyEditor - fix problem displaying wrong measurement names while adding sync reference in cases with different measurement sets per channel
- HottAdapter - fix SWT error while live data gathering and closed dialog
- HottAdapter - implement 19200 new protocol master and slave mode
- HottAdapter - enable multiple connected sensors
- HoTTAdapter - fix data parsing error 115200 protocol temperature > 127 °C
- Documentation update