Softpedia >Windows >Internet >Remote Utils >FlexiHub >  Changelog

FlexiHub Changelog

What's new in FlexiHub 6.0.15025

Feb 19, 2024
  • Fixed an issue with establishing connections incorrectly to identical USB devices
  • Minor bug fixes and UI improvements.

New in FlexiHub 6.0.14865 (May 31, 2023)

  • Changed: different users of the same computer can access their FlexiHub accounts simultaneously while logged in to their respective computer user accounts.
  • Added: the USB device isolation option.
  • Per-session USB device isolation allows making a connected remote USB device accessible only during a specific session (e.g. an RDP session).
  • Per-user USB device isolation allows making a connected remote USB device accessible only to a specific user.
  • The option is available in FlexiHub for Windows 8.1 and later.
  • Added: the per-session serial device isolation option.
  • Improved: software compatibility with Virtual Serial Port Driver.
  • Some minor fixes and improvements.

New in FlexiHub 5.5.14667 (Feb 1, 2023)

  • Improved: the software can now be uninstalled without a system reboot.
  • Fixed: a crash of the service when trying to forward ports via UPnP.
  • Fixed: compatibility issues when running FlexiHub on a computer with the Donglify software already installed.

New in FlexiHub 5.3.14268 (Oct 20, 2021)

  • Added: possibility to remotely connect to COM port devices from ARM-based systems.
  • Added: support for Windows 11.
  • Fixed: issues with reading the WAIT_ON_MASK event by FlexiHub Virtual Serial Port Drivers.

New in FlexiHub 5.2.14094 (Sep 6, 2021)

  • Added: support for Windows on ARM-based systems.
  • Added: the possibility to share and remotely connect to USB devices and make COM port devices available for remote access.
  • Fixed: software reinstallation issues.

New in FlexiHub 5.0.13796 (Jun 16, 2021)

  • Added: possibility to connect to remote devices via an RDP channel.
  • Added: possibility to set the priority of channels used to connect to remote devices.
  • Added: new Options dialog box.
  • Fixed: connection issues when running FlexiHub on a computer with the Donglify software already installed.

New in FlexiHub 4.6.13465 (Apr 16, 2021)

  • Added: the possibility of simplified software update installation.
  • Added: an error message appearing when there’s no connection to the central FlexiHub server.
  • Improved: security of data transfer between the FlexiHub service and the FlexiHub GUI.
  • Improved: compatibility with software drivers of older versions.
  • Fixed: minor issues with the auto-reconnect feature.

New in FlexiHub 4.4.13244 (Mar 3, 2021)

  • Fixed: issues when connecting to remote USB devices via UDP.

New in FlexiHub 4.4.13219 (Feb 26, 2021)

  • Improved: data transfer speed for USB devices of all types.
  • Fixed: a crash of the service when the network connection is lost.

New in FlexiHub 4.3.13207 (Feb 15, 2021)

  • Added: compatibility with macFUSE 4.
  • Added: an option to use path-style addressing to access S3 connections.
  • Improved: work with Google Drive.
  • Improved: work with Dropbox.
  • Improved: work with OneDrive.
  • Improved: work with pCloud.
  • Improved: work with Amazon S3.
  • Fixed: issues with connecting to some FTP servers.
  • Fixed: an issue with Google Team Drive displaying with drive names written in some languages.
  • Fixed: an issue with the unpacking of 7z archives with a password.
  • Fixed: an issue with creating of ZIP archives with a password.

New in FlexiHub 3.4.11623 (Feb 8, 2019)

  • Added: the ability to log in to a FlexiHub account using a token. The option to generate a token is available in online personal accounts of FlexiHub users.
  • Improvements for accounts with a large number of nodes:
  • Added: the ability to filter devices by their type.
  • Added: the abilities to collapse and expand all nodes in the account. The options will be applied to the newly added nodes as well.
  • Added: remembering of the expanded or collapsed node state on the program restart.
  • Added: the option to show only remote devices connected to a local computer.
  • Added: the option to disconnect all remote devices from a local computer.
  • Added: alphabetical sorting of nodes.
  • Fixed: issues with installing the software drivers on Windows XP x64 Edition

New in FlexiHub 3.3.11481 (Nov 23, 2018)

  • Fixed: a UDP connection might not be established if the option Keep connections active is enabled.
  • Fixed: crashing of the service if it hasn’t been accessed for several weeks.
  • Lots of other minor fixes and improvements.

New in FlexiHub 3.3.11431 (Oct 22, 2018)

  • Added: The ability to keep the connection to a remote device active when the Internet connection is temporarily lost.
  • Added: New drivers with fixes for better stability.
  • Improved: The compatibility with USB Analyzer.
  • Fixed: Issues when sharing some USB 3.0 devices.
  • Fixed: BSOD when sharing a USB network card.

New in FlexiHub 3.2.10975 (Apr 12, 2018)

  • Added: chats between computers logged into the same account.
  • Added: auto-expanding of e-mail address when sending invites.
  • Added: resending of previously sent invites upon re-login.
  • Improved: the frequency of sending traffic statistics has been increased to 2 seconds.
  • Fixed: an error upon login if the server response is not received in time.
  • Fixed: incorrect reporting of IP addresses to the server after adding a new network interface.
  • Fixed: the ‘Disconnect’ button is now removed for offline devices.
  • Fixed: locked devices are now displayed in invites.
  • Fixed: an issue with uninstallation if there are active connections.
  • Fixed: rare cases of displaying the ‘Connect’ button in invites for offline devices.
  • Fixed: displaying of traffic after device disconnection.
  • Fixed: the ‘Device Connection Error’ now gets disabled after device re-plugging.
  • Fixed: rare cases of not detecting direct visibility for some nodes in the account.

New in FlexiHub 3.1.10381 (Aug 28, 2017)

  • Added: a number of new localizations:
  • Chinese (China)
  • Chinese (Taiwan)
  • Italian
  • Portuguese
  • Spanish
  • Added: GUI compatibility with high-resolution monitors.
  • Improved: faster direct connection check between the nodes (by optimizing the list of network interfaces).
  • Fixed: rare cases of the remote devices list being not displayed.
  • Fixed: rare cases of failed reconnection to the central server after waking the computer up after sleep.
  • Fixed: rare cases of looping of the unsuccessful auto-reconnect attempts.
  • Fixed: rare cases of the service hanging when communication with the central server is lost.
  • Fixed: auto-reconnection to the devices with the identical VID/PID.
  • Fixed: preserving the node’s name after re-logging into the account (in case the node was renamed).
  • Fixed: service crashing when the user logs out during the established connection to the device.
  • Fixed: a bug when the connection via UDP was unsuccessful.
  • Fixed: rare occasions of the “Forget” button being missing for the offline devices.
  • Other minor improvements.

New in FlexiHub 3.0.10251 (Jan 4, 2017)

  • Improved: detection of the optimal connection mode (more chances to have a direct connection and, therefore, the best performance).

New in FlexiHub 3.0.10233 (Dec 23, 2016)

  • Fixed: an error when connecting via UDP.
  • Fixed: log files occasionally getting too big and using too much disk space.
  • Fixed: automatic port forwarding via UPnP (when enabled on the router).
  • Fixed: a crash of the GUI when not having write permissions to the logs directory.

New in FlexiHub 3.0.10091 (Nov 22, 2016)

  • Added: the ability to send connection invites to other FlexiHub users
  • Added: Gravatar support
  • Improved: the network communication has been optimized to reduce traffic
  • Fixed: a crash of the service when specifying a computer name or device description that was too long
  • Fixed: the previously entered proxy settings might not be displayed after reopening
  • Fixed: auto-reconnect could break the existing connection with another node
  • Fixed: occasional lack of feedback to the user when connecting to a node that did not have the FlexiHub drivers installed

New in FlexiHub 2.6.9291 (Aug 22, 2016)

  • Fixed: a bug with reconnecting to the central server due to which the FlexiHub service could become unresponsive

New in FlexiHub 2.6.9127 (Jun 30, 2016)

  • Changed: new limitations for trial accounts
  • Fixed: login would fail if the email was specified in a case different from what was used during the registration

New in FlexiHub 2.2.7548 (Dec 28, 2015)

  • Added: German and French localizations
  • Added: possibility to enable identification of similar USB devices by location
  • Multiple internal enhancements for even better app stability
  • Much improved: transfer speed for USB Flash drives
  • Improved: account settings can be managed online for your utmost convenience
  • Improved: instantaneous ports creation lets working with them even before PnP manager detects the newly added ports
  • Fixed: BSOD when trying to connect to USB device on Windows 10
  • Fixed: login issues on Windows XP