Softpedia >Windows >Science / CAD >Machining Simulation >  Changelog

Machining Simulation Changelog

What's new in Machining Simulation 2.2.0.30 Mill

Oct 2, 2023
  • G68 used in front of G02/G03 causes an issue of Z coordinate fixed.
  • Fix of precision problem for floating

New in Machining Simulation 2.2.0.29 Mill (Sep 28, 2023)

  • G68 used in front of G02/G03 causes an issue of Z coordinate fixed.

New in Machining Simulation 2.2.0.26 Mill (Aug 24, 2023)

  • G87 issue fixed.

New in Machining Simulation 2.2.0.28 Lathe (Jul 25, 2023)

  • Modified directions of hand wheel.
  • Fixed repeating tool path for G75.
  • Fixed wrong tool path adding G54 in the next block after Txxxx.

New in Machining Simulation 2.2.0.25 Mill (Jul 25, 2023)

  • Modified directions of hand wheel.
  • Fixed the issue occurring when G15 is used in a subprogram.
  • Fixed the wrong tool path as G28 is used in the G19 plane.

New in Machining Simulation 2.2.0.22 Mill (Jul 20, 2023)

  • Modified directions of hand wheel.
  • Fixed the issue occurring when G15 is used in a subprogram.
  • Fixed the wrong tool path as G28 is used in the G19 plane.

New in Machining Simulation 2.2.0.20 Mill (Jul 13, 2023)

  • Known bugs fixed: Disable Rapid Location during tool changing.
  • Fixed an issue of lifting main spindle touching the top face of the stock by using auto tool changing Txx M06.
  • Issue of P command for G51 fixed.

New in Machining Simulation 2.2.0.19 Mill / 2.2.0.25 Lathe (Jul 3, 2023)

  • Known bugs fixed: Disable Rapid Location during tool changing.
  • Fixed an issue of lifting main spindle touching the top face of the stock by using auto tool changing Txx M06.

New in Machining Simulation 2.2.0.21 Lathe (Jun 12, 2023)

  • Warning of input of a decimal point for P and Q in G75 and G74.
  • Issue when P value is too small for G74 fixed.

New in Machining Simulation 2.2.0.18 Mill (Jun 12, 2023)

  • Optimzied the rendering effect of workpiece.
  • Fixed an issue of creating new NC program in E68.
  • Fixed an issue of switching WCS from one to another in canned cycle.

New in Machining Simulation 2.2.0.20 Lathe (Jun 2, 2023)

  • Warning of input of a decimal point for P and Q in G75 and G74.
  • Issue when P value is too small for G74 fixed.

New in Machining Simulation 2.2.0.16 Mill (Jun 2, 2023)

  • Optimzied the rendering effect of workpiece.
  • Fixed an issue of creating new NC program in E68.

New in Machining Simulation 2.2.0.19 Lathe (May 29, 2023)

  • Boring tool added.
  • Tool path for G75 optimized.
  • New column for tool name appended in the turret list..

New in Machining Simulation 2.2.0.18 Mill (May 28, 2023)

  • Optimzied the rendering effect of workpiece.
  • Added warning for G71,G72 ,G73 with incorrect P and Q specification.
  • Cancel the movement for G0 without dimension word .

New in Machining Simulation 2.2.0.15 Mill (May 28, 2023)

  • Fixed an issue of switching WCS from one to another in canned cycle.

New in Machining Simulation 2.2.0.16 Lathe (May 21, 2023)

  • Optimzied the rendering effect of workpiece.
  • Added warning for G71,G72 ,G73 with incorrect P and Q specification.
  • Cancel the movement for G0 without dimension word .

New in Machining Simulation 2.2.0.12 Mill (May 21, 2023)

  • Fixed an issue of switching WCS from one to another in canned cycle.

New in Machining Simulation 2.2.0.11 Mill (May 12, 2023)

  • Optimzied the rendering effect of workpiece.
  • Fixed an issue of creating new NC program in E68.

New in Machining Simulation 2.2.0.15 Lathe (May 11, 2023)

  • Optimzied the rendering effect of workpiece.
  • Added warning for G71,G72 ,G73 with incorrect P and Q specification.

New in Machining Simulation 2.2.0.12 Lathe (Apr 28, 2023)

  • R(e) is not specified in G74 and G75 causes a dead loop fixed.
  • The Q value with no decimal point in the block G83 causes no return amount fixed.

New in Machining Simulation 2.2.0.10 Mill (Apr 28, 2023)

  • Enhancement for G41 and G42 commands.

New in Machining Simulation 2.2.0.10 Lathe (Apr 10, 2023)

  • R(e) is not specified in G74 and G75 causes a dead loop fixed.
  • The Q value with no decimal point in the block G83 causes no return amount fixed.

New in Machining Simulation 2.1.9.30 Mill (Apr 10, 2023)

  • Enhancement for G41 and G42 commands.

New in Machining Simulation 2.1.9.31 Lathe (Mar 24, 2023)

  • R(e) is not specified in G74 causes a dead loop fixed.
  • The Q value with no decimal point in the block G83 causes no return amount fixed.

New in Machining Simulation 2.1.9.29 Mill (Mar 24, 2023)

  • Enhancement for G41 and G42 commands.

New in Machining Simulation 2.1.9.25 Mill / 2.1.9.26 Lathe (Mar 12, 2023)

  • Added icons for tool magzine.
  • Fixed DirectX Device Lost issue .

New in Machining Simulation 2.1.9.23 Mill / 2.1.9.25 Lathe (Mar 7, 2023)

  • Added icons for tool magzine.

New in Machining Simulation 2.1.9.22 Mill / 2.1.9.23 Lathe (Feb 26, 2023)

  • Fixed an error of floating point number in the scientific format outputted by a math function.
  • Fixed an error of floating point number in the scientific format outputted by a math function.

New in Machining Simulation 2.1.9.20 Mill (Dec 27, 2022)

  • Fixed problem with G18 and G19.

New in Machining Simulation 2.1.9.19 Mill / 2.1.9.21 Lathe (Dec 22, 2022)

  • Fixed issue of editing FANUC MACRO.

New in Machining Simulation 2.1.9.18 Mill / 2.1.9.20 Lathe (Dec 12, 2022)

  • Bug fixed. 

New in Machining Simulation 2.1.9.15 Mill / 2.1.9.19 Lathe (Nov 29, 2022)

  • Bug fixed

New in Machining Simulation 2.1.9.18 Lathe (Nov 9, 2022)

  • Bug fixed.

New in Machining Simulation 2.1.9.10 Mill (Nov 9, 2022)

  • Added the support to M19.
  • Added an action of stopping main spindle at the bottom of a hole and calcel the warning against missing P in a block of G76.

New in Machining Simulation 2.1.9.9 Mill (Nov 6, 2022)

  • Added the support to M19.
  • Added an action of stopping main spindle at the bottom of a hole and calcel the warning against missing P in a block of G76.

New in Machining Simulation 2.1.9.16 Lathe (Nov 6, 2022)

  • Bug fixed.

New in Machining Simulation 2.1.9.11 Lathe (Oct 21, 2022)

  • Bug fixed.

New in Machining Simulation 2.1.9.10 Lathe (Sep 18, 2022)

  • Support for A Macro added.
  • G72 issue fixed.

New in Machining Simulation 2.1.9.5 Mill (Sep 16, 2022)

  • Bug fixed.
  • Support for A Macro added.

New in Machining Simulation 2.1.9.8 Lathe (Aug 28, 2022)

  • Bug fixed

New in Machining Simulation 2.1.9.3 Mill (Aug 28, 2022)

  • An issue of MACRO for G#xx whose value is changed in WHILE loop fixed.
  • An issue of compensation when tool path around arc A and B are tangent fixed.

New in Machining Simulation 2.1.9.7 Lathe (Aug 25, 2022)

  • A fix of G71 II.

New in Machining Simulation 2.1.9.1 Mill / 2.1.9.6 Lathe (Jul 29, 2022)

  • A fix of executing S command in a WHILE loop.
  • Bug fixed.

New in Machining Simulation 2.1.9.5 Lathe (Jul 26, 2022)

  • Bug fixed.

New in Machining Simulation 2.1.8.9 Mill (Jul 26, 2022)

  • A fix of G71 for internal maching.
  • Input O-9999 to dump all CNC programs .

New in Machining Simulation 2.1.8.8 Mill (Jul 13, 2022)

  • Fixed bugs.

New in Machining Simulation 2.1.9.2 Lathe (Jul 1, 2022)

  • Fixed G72 issue.

New in Machining Simulation 2.1.8.5 Mill (Jun 2, 2022)

  • Fixed an issue of tool changing.

New in Machining Simulation 2.1.9.1 Lathe (May 22, 2022)

  • 4-station turret is available.
  • Fixed the path of G70 to the start point when G70 is terminated and canceled the movement of G00/G01 when dimension commands are not specified.

New in Machining Simulation 2.1.8.3 Mill / 2.1.8.9 Lathe (May 20, 2022)

  • Fixed bugs.
  • Fixed an issue for MACRO

New in Machining Simulation 2.1.8.8 Lathe (Apr 30, 2022)

  • 1. 4-station turret is available.

New in Machining Simulation 2.1.8.1 Mill (Apr 26, 2022)

  • Fixed bugs.
  • Fixed an issue for MACRO

New in Machining Simulation 2.1.7.8 Mill / 2.1.8.2 Lathe (Apr 9, 2022)

  • Fixed bugs.

New in Machining Simulation 2.1.8.2 Mill / 2.1.7.6 Lathe (Mar 25, 2022)

  • Fixes an issue of circle commands in G41/G42.

New in Machining Simulation 2.1.7.2 Mill / 2.1.7.9 Lathe (Mar 23, 2022)

  • Fixed bugs.

New in Machining Simulation 2.1.6.9 Mill / 2.1.7.7 Lathe (Mar 9, 2022)

  • Fix bugs.

New in Machining Simulation 2.1.6.8 Mill / 2.1.7.3 Lathe (Mar 1, 2022)

  • Fix bugs.

New in Machining Simulation 2.1.6.2 Mill / 2.1.6.6 Lathe (Jan 8, 2022)

  • Fix bugs.

New in Machining Simulation 2.1.5.9 Mill (Dec 21, 2021)

  • Fix of radius compensation.
  • Update milling cutter to round nose milling cutter.

New in Machining Simulation 2.1.6.3 Lathe (Dec 21, 2021)

  • Update of G72 II.
  • Update of new cutters .
  • Fix bugs.

New in Machining Simulation 2.1.6.1 Lathe (Dec 18, 2021)

  • Update of G72 II.
  • Update of new cutters .
  • Fix bugs.

New in Machining Simulation 2.1.5.8 Mill (Dec 18, 2021)

  • Fix of radius compensation.
  • Update milling cutter to round nose milling cutter.

New in Machining Simulation 2.1.5.5 Mill (Jun 19, 2021)

  • Fix of radius compensation.
  • Update milling cutter to round nose milling cutter.

New in Machining Simulation 2.1.5.7 Lathe (Jun 10, 2021)

  • Fix of display for measurement .

New in Machining Simulation 2.1.5.3 Mill (Jun 2, 2021)

  • Fix of G87.
  • Optimization for length compensation.

New in Machining Simulation 2.1.5.1 Mill (May 23, 2021)

  • Optimized for running subprograms

New in Machining Simulation 2.1.5.5 Lathe (May 17, 2021)

  • Fixed for threading cycle.

New in Machining Simulation 2.1.4.6 Mill / 2.1.5.3 Lathe (May 4, 2021)

  • Compiled with VS2010 and fixed.

New in Machining Simulation 2.1.5.2 Lathe (Apr 28, 2021)

  • Update of KND system panel.
  • Optimized for G76 and G71

New in Machining Simulation 2.1.4.3 Mill (Apr 24, 2021)

  • Update for radius compensation.

New in Machining Simulation 2.1.3.9 Lathe (Apr 8, 2021)

  • Update FANUC control.

New in Machining Simulation 2.1.3.8 Mill (Apr 8, 2021)

  • Update FANUC control.

New in Machining Simulation 2.1.3.6 Mill / 2.1.3.8 Lathe (Apr 6, 2021)

  • Fixed an issue of M30..

New in Machining Simulation 2.1.3.5 Mill (Apr 5, 2021)

  • Added KND CNC system.

New in Machining Simulation 2.1.3.6 Lathe (Apr 5, 2021)

  • Added KND CNC system.

New in Machining Simulation 2.1.3.2 Mill (Mar 29, 2021)

  • Fixed issue of tool library.

New in Machining Simulation 2.1.3.1 Mill (Mar 28, 2021)

  • Fixed issue of tool library.

New in Machining Simulation 2.1.3.3 Lathe (Mar 25, 2021)

  • Fixed issues of tool magzine.
  • Added ball-end drill.

New in Machining Simulation 2.1.2.5 Mill (Mar 22, 2021)

  • Optimized radius compensation for line interpolation.

New in Machining Simulation 2.1.3.2 Lathe (Feb 10, 2021)

  • Fixed issues of tool magzine.

New in Machining Simulation 2.1.3.1 Lathe (Jan 17, 2021)

  • Added a tool of chamfer milling.
  • Optimized for G72.

New in Machining Simulation 2.1.2.3 Mill (Jan 17, 2021)

  • Optimized G01 with corner rounding in radius compensation.

New in Machining Simulation 2.1.2.9 Lathe (Jan 11, 2021)

  • Added a tool of chamfer milling.
  • Optimized for G72.

New in Machining Simulation 2.1.2.6 Lathe (Nov 9, 2020)

  • Optimized for G71 II.

New in Machining Simulation 2.1.2.2 Mille (Nov 3, 2020)

  • Optimized radius compensation.

New in Machining Simulation 2.1.2.1 Mill (Oct 21, 2020)

  • Optimized for G71 II.

New in Machining Simulation 2.1.2.5 Lathe (Sep 12, 2020)

  • Optimized for G71 II.

New in Machining Simulation 2.1.1.9 Mill (Sep 10, 2020)

  • bugs fixed.

New in Machining Simulation 2.1.2.3 Lathe (Sep 1, 2020)

  • bugs fixed.

New in Machining Simulation 2.1.2.2 Lathe (Sep 1, 2020)

  • Optimized automatic chamfer and fillet.

New in Machining Simulation 2.1.1.5 Mill (Jul 20, 2020)

  • Optimized G51 scaling .

New in Machining Simulation 2.1.2.1 Lathe (Jul 16, 2020)

  • Optimized automatic chamfer and fillet.

New in Machining Simulation 2.1.1.9 Lathe (Jul 11, 2020)

  • Optimized running Macro program.
  • Enhanced checking the canned cycles.

New in Machining Simulation 2.1.1.2 Mill / 2.1.1.8 Lathe (Jul 9, 2020)

  • Optimized running Macro program.

New in Machining Simulation 2.0.9.9 Mill / 2.1.1.6 Lathe (Jun 9, 2020)

  • Optimized the tips for NC programs' errors.

New in Machining Simulation 2.1.1.5 Lathe (May 25, 2020)

  • Optimization for variables assignment in Macro programs..
  • Optimization for canned cycles with a P and Q block.

New in Machining Simulation 2.0.9.8 Mill (May 25, 2020)

  • .Optimization for variables assignment in Macro programs.

New in Machining Simulation 2.1.1.3 Lathe (May 24, 2020)

  • Optimization for MDI mode.
  • Added a warning that the machine door is opened under MDI mode.

New in Machining Simulation 2.0.9.7 Mill (May 24, 2020)

  • Optimization for MDI mode.
  • Added a warning that the machine door is opened under MDI mode.

New in Machining Simulation 2.1.1.2 Lathe (May 6, 2020)

  • Added pressing button EOB for creating a new NC program.
  • Issued a warning against door opened during auto run.

New in Machining Simulation 2.0.9.6 Mill (May 6, 2020)

  • Added pressing button EOB for creating a new NC program.
  • Added Fanuc 0iMF system.
  • Issued a warning against door opened during auto run.
  • Fixed an error of compensation in Macro programming.

New in Machining Simulation 2.1.1.1 Lathe (Apr 25, 2020)

  • Issued a warning against door opened during auto run.

New in Machining Simulation 2.0.9.5 Mill (Apr 25, 2020)

  • Issued a warning against door opened during auto run.
  • Fixed an error of compensation in Macro programming.

New in Machining Simulation 2.1.0.9 Lathe (Apr 24, 2020)

  • Added pressing button EOB for creating a new NC program.

New in Machining Simulation 2.0.9.3 Mill (Apr 24, 2020)

  • Added pressing button EOB for creating a new NC program.
  • Added Fanuc 0iMF system.

New in Machining Simulation 2.1.0.8 Lathe (Apr 20, 2020)

  • Fixed the issue when calling subroutine..
  • Enhanced validating the format for G70,G71,G72 commands.

New in Machining Simulation 2.0.9.2 Mill (Apr 20, 2020)

  • Fixed the issue when calling subroutine.

New in Machining Simulation 2.1.0.5 Lathe (Mar 28, 2020)

  • Increased the strok of Z aixs to 370mm.

New in Machining Simulation 2.0.8.9 Mill (Mar 27, 2020)

  • Replaced the previous interpolation method of axes with smooth moving.

New in Machining Simulation 2.1.0.2 Lathe (Mar 26, 2020)

  • Added System GSK980TDb.

New in Machining Simulation 2.1.0.1 Lathe (Mar 25, 2020)

  • Added System GSK980TDb.

New in Machining Simulation 2.0.8.8 Mill (Mar 25, 2020)

  • Fixed bugs.

New in Machining Simulation 2.0.9.9 Lathe (Mar 23, 2020)

  • Added System GSK980TDb.

New in Machining Simulation 2.0.8.5 Mill (Mar 18, 2020)

  • Fixed bugs

New in Machining Simulation 2.0.8.2 Mill (Mar 14, 2020)

  • Optimized input on systems' panels.

New in Machining Simulation 2.0.9.7 Lathe (Mar 3, 2020)

  • Fixed bugs.

New in Machining Simulation 2.0.7.8 Mill (Mar 3, 2020)

  • Fixed bugs.

New in Machining Simulation 2.0.9.6 Lathe (Mar 2, 2020)

  • Optimized running G71 blocks.

New in Machining Simulation 2.0.7.7 Mill (Mar 1, 2020)

  • Optimized running Macro programs.

New in Machining Simulation 2.0.9.5 Lathe (Mar 1, 2020)

  • Fixed an issue of chamfer with C.

New in Machining Simulation 2.0.9.3 Lathe (Feb 17, 2020)

  • Fixed an issue when jogging with the handwheel.

New in Machining Simulation 2.0.9.1 Lathe (Jan 22, 2020)

  • Optimized running Macro programs.
  • Added validating if G codes input by users are supported.

New in Machining Simulation 2.0.7.6 Mill (Jan 22, 2020)

  • Optimized running Macro programs.
  • Added validating if G codes input by users are supported.

New in Machining Simulation 2.0.8.9 Lathe (Jan 20, 2020)

  • Optimized running Macro programs.
  • Added function for manually stopping during parsing a program.

New in Machining Simulation 2.0.7.5 Mill (Jan 20, 2020)

  • Optimized running Macro programs.
  • Added function for manually stopping during parsing a program .

New in Machining Simulation 2.0.7.3 Mill (Dec 24, 2019)

  • Optimized command G04.

New in Machining Simulation 2.0.8.8 Lathe (Dec 22, 2019)

  • Optimized running programs in MDI.

New in Machining Simulation 2.0.6.9 Mill (Nov 20, 2019)

  • Fixed radius compensation

New in Machining Simulation 2.0.8.3 Lathe (Oct 27, 2019)

  • Fixed running commands in MDI.
  • Enhancement of view in 2D simulation.

New in Machining Simulation 2.0.6.8 Mill (Oct 27, 2019)

  • Fixed running commands in MDI.

New in Machining Simulation 2.0.8.2 Lathe (Oct 22, 2019)

  • Modified G50 command.
  • Fixed display of system's coordinate.

New in Machining Simulation 2.0.7.9 Lathe (Oct 18, 2019)

  • Modified M30 command.

New in Machining Simulation 2.0.6.7 Mill (Oct 18, 2019)

  • Optimization of canned cycle command.
  • Modified M30 command.

New in Machining Simulation 2.0.7.7 Lathe (Oct 13, 2019)

  • Cancellation of check for main spindle rotating direction.

New in Machining Simulation 2.0.7.6 Lathe (Oct 8, 2019)

  • Optimization of cutter compensation.
  • Added automatic chamfer and fillet .
  • Fixed G16 issue.

New in Machining Simulation 2.0.6.6 Mill (Oct 8, 2019)

  • Optimization of cutter compensation.
  • Enhancement of automatic chamfer and fillet.

New in Machining Simulation 2.0.6.5 Mill (Oct 2, 2019)

  • Add automatic chamfer and fillet for an arbitrary angle.
  • Fixed G16 issue.

New in Machining Simulation 2.0.6.2 Mill (Jun 4, 2019)

  • Fixed error of a command.

New in Machining Simulation 2.0.7.1 Lathe (May 18, 2019)

  • Fixed bug

New in Machining Simulation 2.0.6.1 Mill (May 18, 2019)

  • Fixed bug

New in Machining Simulation 2.0.6.8 Lathe (May 12, 2019)

  • Fixed bugs.

New in Machining Simulation 2.0.6.7 Lathe (May 10, 2019)

  • Enhancement to check invalid input of G76.

New in Machining Simulation 2.0.6.6 Lathe (May 6, 2019)

  • Enhancement to check invalid input of G71.
  • Fixed issue of face grooving.

New in Machining Simulation 2.0.5.8 Mill (May 6, 2019)

  • Enhancement to check invalid Macro instruction input.
  • Fixed bugs.

New in Machining Simulation 2.0.6.5 Lathe (May 1, 2019)

  • Enhancement to check invalid input of G71.
  • Fixed issue of face grooving.

New in Machining Simulation 2.0.5.7 Mill (Apr 17, 2019)

  • Enhancement to check invalid Macro instruction input.

New in Machining Simulation 2.0.6.3 Lathe (Apr 15, 2019)

  • Enhancement to check invalid input of G71.
  • Fixed issue of face grooving.

New in Machining Simulation 2.0.5.6 Mill (Apr 15, 2019)

  • Enhancement to check invalid Macro instruction input.
  • Fixed bugs.

New in Machining Simulation 2.0.6.2 Lathe (Apr 10, 2019)

  • Enhancement to check invalid Macro instruction input.
  • Enhancement to G73's tool path.
  • Fixed bugs.

New in Machining Simulation 2.0.5.5 Mill (Apr 8, 2019)

  • Fixed issue of which inputting invalid Macro instruction causes crashing.

New in Machining Simulation 2.0.6.1 Lathe (Apr 8, 2019)

  • Fixed issue of which inputting invalid Macro instruction causes crashing.

New in Machining Simulation 2.0.5.3 Mill (Apr 5, 2019)

  • All new NC program parsing engine that has supported macro program now.
  • Fixed issue of Macro expression.

New in Machining Simulation 2.0.5.9 Lathe (Apr 5, 2019)

  • All new NC program parsing engine that has supported macro program now.
  • Fixed issue of Macro expression.

New in Machining Simulation 2.0.5.6 Lathe (Mar 25, 2019)

  • All new NC program parsing engine that has supported macro program now.
  • Fixed bug of Macro WHILE and Circular instructions.

New in Machining Simulation 2.0.5.5 Lathe (Mar 23, 2019)

  • Fixed bug of Fanuc system user interface

New in Machining Simulation 2.0.4.6 Mill (Mar 23, 2019)

  • Fixed bug of Fanuc system user interface

New in Machining Simulation 2.0.5.2 Lathe (Mar 14, 2019)

  • All new NC program parsing engine that has supported macro program now.
  • Fixed bugs of G90,G92 and G94.

New in Machining Simulation 2.0.4.9 Lathe (Mar 7, 2019)

  • All new NC program parsing engine that has supported macro program now.
  • Fixed issue of shifting WCS.

New in Machining Simulation 2.0.4.6 Lathe (Feb 19, 2019)

  • All new NC program parsing engine that has supported macro program now.
  • Fixed issue during SQRT executed.

New in Machining Simulation 2.0.4.2 Mill (Feb 19, 2019)

  • All new NC program parsing engine that has supported macro program now.
  • Fixed issue during SQRT executed.
  • Fixed bugs.

New in Machining Simulation 2.0.3.4 (Jan 7, 2019)

  • 1. All new NC program parsing engine that has supported macro program now.
  • 2. Bug fixed.

New in Machining Simulation 2.0.3.2 (Aug 19, 2018)

  • All new NC program parsing engine that has supported macro program now.
  • Automatically restore system data after reinstall.
  • Optimized workpiece rendering.

New in Machining Simulation 2.0.3.1 (Aug 16, 2018)

  • Added G10 L2/10/11/12/13 support and bug fix.

New in Machining Simulation 2.0.2.8 (Aug 7, 2018)

  • Bug fix.

New in Machining Simulation 2.0.2.7 (Aug 5, 2018)

  • All new NC program parsing engine that has supported macro program now.
  • Increasing the efficiency in the execution of canned cycles and macro instructions.

New in Machining Simulation 2.0.2.5 (Aug 4, 2018)

  • All new NC program parsing engine that has supported macro program now.
  • Optimization of loading NC program.
  • Fixed macro instruction's input.

New in Machining Simulation 2.0.2.3 (Jul 31, 2018)

  • All new NC program parsing engine that has supported macro program now.
  • Optimization of loading NC program.

New in Machining Simulation 2.0.0.5 (Sep 1, 2017)

  • All new NC program parsing engine that has supported macro program now.
  • Fix bugs.

New in Machining Simulation 2.0.0.3 (Aug 29, 2017)

  • new NC program parsing module

New in Machining Simulation 2.0.0.2 (Aug 28, 2017)

  • All new NC program parsing engine that has supported macro program now.
  • Fix bugs.

New in Machining Simulation 1.2.9.8 (Mar 10, 2017)

  • Fixed G code parsing issue.
  • Fixed the issue that the part can not be displayed on legacy display card.

New in Machining Simulation 1.2.9.7 (Mar 2, 2017)

  • Fixed procedure for tool length measurement for Fanuc system.
  • Added pressing POS or OFFSET key several times until the screen is displayed.

New in Machining Simulation 1.2.6.7 (Nov 30, 2015)

  • Add a function of restoring and saving tools

New in Machining Simulation 1.2.6.2 (Nov 20, 2014)

  • Fixed issue of excuting G43 during canned cycle