What's new in Nvidia Profile Inspector 2.4.0.4
Mar 26, 2023
- Improved dpi scaling for input dialog
- Possible fix for corrupted profile inspector config load error
- Improved backward compatibility
- Possible fix for restore profile dont work as expected
- Possible fix for mysteric "BINARY" load error
New in Nvidia Profile Inspector 2.4.0.3 (Nov 27, 2022)
- renamed some settings
- added setting to disable Vulkan RT support
- added quick filter CTRL + F (ESCAPE to abort)
- added devmode view (CTRL + ALT + D)
- added support for descriptions in CSN for future use (sample description on Ultra Low Latency - CPL State)
- small fixes
New in Nvidia Profile Inspector 2.3.0.13 Pre-release (Jan 19, 2021)
- updated driver settings to R460, removed deprecated settings from CSN
New in Nvidia Profile Inspector 2.3.0.12 (Mar 24, 2020)
- R445.75 removed restricted settings to avoid errors
New in Nvidia Profile Inspector 2.3.0.11 (Feb 4, 2020)
- R442.19 - increased limiter v3 range 20..1000 FPS
New in Nvidia Profile Inspector 2.3.0.9 (Jan 12, 2020)
- added ShowCustomizedSettingNamesOnly & ShowScannedUnknownSettings to …user settings
New in Nvidia Profile Inspector 3.5.0.0 (Mar 26, 2019)
- Add AutoBuild bat script.
- Add Potrable Apps Original App Format.
New in Nvidia Profile Inspector 2.3.0.2 (Mar 24, 2019)
- fix #13 remember window size, fix crash on closing app while scanning
New in Nvidia Profile Inspector 1.9.7.8 (Nov 18, 2016)
- added "dpiAware" flag to support win8+ dpi scaling
- avoid interupting status requests on optimus cards
- show power usage in watts on main page if supported and nvml is available
- added encoder usage to monitoring if supported and nvml is available
- added decoder usage to monitoring if supported and nvml is available
- added power limit status to monitoring
- added thermal limit status to monitoring
- added reliability voltage limit status to monitoring
- added sli sync boost limit to monitoring
- added CLI param "setVoltagePoints"
- added CLI param "dumpVoltagePoints"
- changed CLI param "lockVoltagePoint" to also use uV instead of mV
- fixed calling CLI made voltage points reset
- added max boost clock estimation for pascal with voltage point support
New in Nvidia Profile Inspector 1.9.7.7 (Sep 23, 2016)
- fixed GDDR5X detection
- fixed voltage reading for pascal
- disabled max boost clock detection for pascal (quick fix for 3rd party curve reset on inspector start)
- readded button and jumplist entry for profile inspector if exists
- added CLI param "-lockVoltagePoint"
New in Nvidia Profile Inspector 1.9.7.6 (Mar 31, 2016)
New in Nvidia Profile Inspector 1.9.7.5 (Mar 28, 2016)
- removed obsolete profile settings jump list entry
- fixed cuda lib error
New in Nvidia Profile Inspector 1.9.7.4 (Mar 25, 2016)
- replaced old ROP calculation with new API call, this schould fix ROP count for Maxwell 2 cards with reduced L2 Cache
- increased unlocked UI clock limit for non boost states to fix error with memory clocks beyond 4000MHz
- improved max boost clock estimation for maxwell
- completely removed settings profile editor from main application, it is now deployed as standalone application
New in Nvidia Profile Inspector 1.9.7.3 (Oct 7, 2014)
- updated setting constants until driver R343
- updated custom settings
- override reported default value for aa gamma correction and shader cache
- fixed donation link
- show memory vendor shortname after memory type
- you can now add "-silent" param after the nip file for silent profile import
- creating startup tasks will add 30sec task delay
- creating seperated startup tasks for each perf level
- fixed default values for non P0 state oc controls
- fixed MDPS apps drag & drop from non elevated desktop
- fixed ROP calculation for Maxwell 2 cards
New in Nvidia Profile Inspector 1.9.7.2 Beta (Jul 20, 2013)
- changed MDPS startup to make use of TaskScheduler instead of shortcut
- changed "Create Startup Shortcut" feature for clock startup to make use of TaskScheduler too ( rightclick "Create Clocks Shortcut" )
- added lod bias adjustment for OpenGL
- added FERMI_SETREDUCECOLORTHRESHOLDSENABLE as "Antialiasing fix" to avoid black edges in some games while using MSAA (R320.14+)
- added OverrideDefault property to CustomSettingNames structure
- added total card power level (normalized) to sensor monitoring (R314+)
- changed MDPS to run always in legacy mode but with enabled "add by gpu process" feature
New in Nvidia Profile Inspector 1.9.7.1 (Apr 1, 2013)
- fixed overclocking panel was expanded by default
- fixed divide by zero bug for some mobile kepler cards
New in Nvidia Profile Inspector 1.9.7.0 Beta (Mar 4, 2013)
- added support for overvoltage (GK110)
- added support for temperature target (GK110)
- enabled and improved estimated max boost for GK110
- added CLI parameter "-setIlumination" for logo brightness control (GTX 690, TITAN; SLIBRIDGE)
- added CLI parameters for overvoltage and temperature target
- improved high dpi layout for driver settings
New in Nvidia Profile Inspector 1.9.6.9 (Feb 20, 2013)
- updated setting constants and names xml for driver R313
- removed dirty workaround for delete profile driver bug, is fixed since R310
- fixed low resolution gui glitch for bitvalue editor
- improved hex input parsing
New in Nvidia Profile Inspector 1.9.6.8 (Nov 21, 2012)
- possible bugfix for low resolution GUI glitch in setting profiles
New in Nvidia Profile Inspector 1.9.6.7 (Nov 6, 2012)
- improved max boost detection for kepler cards
- added CLI parameter "-skipMaxBoostTest" to disable max boost detection
- added CLI parameter "-disableScan" for profile settings
- added new profile helper while dragndrop exe file and no profile is found (take care you not just took the launcher)
- removed (DX9) postfix for LOD bias setting, its supported for DX10+ too since driver r310
New in Nvidia Profile Inspector 1.9.6.6 (Jun 21, 2012)
- clock domains reworked, fixed some 304.xx issues on kepler
- switched shader to gpu clock for monitoring default selection
- updated some setting constants for 302.xx drivers
New in Nvidia Profile Inspector 1.9.6.5 (Apr 27, 2012)
- fixed wrong bandwidth calculation for GDDR3
- added invalid bios detection
- added some vendorids
- finally fixed trilinear optimization setting 1 = off / 0 = on
- changed prerenderlimit setting for 0 (is now app controlled since 300.xx)
- minor changes in default value handling
- updated some settings constants for 300.xx drivers
- added CLI param "-restartDisplayDriver" (Vista/Win7 only)
New in Nvidia Profile Inspector 1.9.6.4 (Apr 12, 2012)
- added memory bandwidth calculation to memory buswidth display
- fixed baseclock range out of bounds in some cases
- workaround for strange vcore offset on negative base clock offset
- replaced mem usage display by pci-e interface info on main gui
- added max boost clock estimation
New in Nvidia Profile Inspector 1.9.6.3 (Apr 3, 2012)
- added "+" sign for offset values
- added small startup delay for MDPS tray start
- fixed restoreAllPStates to work for offsets as well
- added adaptive vsync flag to custom settings (for 300+ drivers)
- added FXAA to custom settings (for 300+ drivers)
New in Nvidia Profile Inspector 1.95.9 (Jan 9, 2012)
- fixed function 'ChangeWindowMessageFilter' not available on XP
- fixed frame rate limiter is already included since 280.26+ drivers
New in Nvidia Profile Inspector 1.95.4 (Mar 1, 2011)
- added quick selection for modified profiles (dropdown on home button)
- added scan progress dialog for user initiated scans
- improved scan speed for modified profiles
- improved storing speed for profile settings
- reduced flickering of profile settings list
- several small fixes
New in Nvidia Profile Inspector 1.95.3 (Mar 1, 2011)
- fixed: p0/p8 capable cards were not detected from MDPS in some cases
- fixed: max values were not resetted on "reset all monitors"
- added "home" button to profile settings to get back to global profile fast
- added "hide to tray" command to monitoring menu
- added legacy process detection mode to MDPS to extend compatibility to older drivers and Win XP ("add from gpu process" will be disabled in this case)
- improved general stability for MDPS
New in Nvidia Profile Inspector 1.95.2 (Feb 21, 2011)
- fixed: closing mainform did not handle closing logic (settings, log) of monitoring form
- fixed: temp folder detection fails on systems with empty temp paths
- fixed: out of range error if nvapi reports incorrect usage
- possible fix: csc.exe crashes on windows shutdown and prevents from storing MDPS settings
- added: mdps now supports cards with p0 and p8 only
- added: monitoring colors customizeable via config file
- small fixes and improvements
New in Nvidia Profile Inspector 1.95.0 (Feb 21, 2011)
- Highlights:
- added Multi Display Power Saver feature (rightclick "Show Overclocking"" button)
- added Monitoring Graphs feature (new button below image upload or rightclick "Show Overclocking"" button)
- added Create/Update/Remove Startup Shortcut feature (rightclick "Create Clocks Shortcut" button)
- Changes:
- already assigned unknown settings from a profile will be shown now even without a settingscan
- request elevation for profile settings only if not already running elevated main app
- allow single instance of profile settings window only
- added detection of missing CSN file which offers the user a oneclick repair (webupdate)
- automaticly removing Zone.Identifier from ADS after first run
- added known subvendor name to card selection
- added global mutex "Access_NV_I2C" around some critical nvapi functions to avoid collision with 3rd party apps
- added small symbol to context enabled buttons
- added CLI option "-multiDisplayPowerSaver"
- added CLI option "-showMonitoring"
- moved data logging feature to monitoring
- screenshot function captures glass now
- changed imagehoster to techpowerup.org
- prevent app from starting within a temp folder
- several minor fixes and improvements
New in Nvidia Profile Inspector 1.94.4 (Jan 22, 2011)
- voltage tweak workaround for crap evga gtx580 sc bios
- added CLI option "-showOnlyCSN"
- added CLI option "-setPStateLimit"
New in Nvidia Profile Inspector 1.94.3 (Jan 14, 2011)
- fixed: reset value does not work in some cases
- fixed: short hex inputs were not recognized correctly
- gpu info refresh on window activate
- updated some setting constants
- added 3rd method for driver detection
- skip shader count detection on non unified shader architectures
- always request elevation for profile settings to reduce confusion why (elevated) settings may missed in the past
- other minor improvements
New in Nvidia Profile Inspector 1.94.2 (Dec 3, 2010)
- added fallback driver detection if no display handle is available
- fixed when the last manually typed value get not applied to profile
- fixed -skipUpdateCheck was ignored in -showSettingsOnly mode
- added some settings API updates
New in Nvidia Profile Inspector 1.93.2 (Oct 25, 2010)
- Final Hotfix: removed displaying of inherited global settings on latest driver releases API, to avoid corrupted profiles when applying custom settings.