What's new in ReClock DirectShow Filter 1.9.0.7
Jan 31, 2023
- New: Added support for PowerDVD 18
New in ReClock DirectShow Filter 1.9.0.6 Beta (May 11, 2017)
- New: Added support for PowerDVD 17
- Change: Updated MediaInfo.dll to 0.7.95.0
New in ReClock DirectShow Filter 1.9.0.5 Beta (May 11, 2017)
- New: Added debug DWORD registry value "NoMediaInfo". If set to 1, the old DirectShow estimator will be used
New in ReClock DirectShow Filter 1.9.0.4 Beta (May 11, 2017)
- Change: MediaInfo estimator improved
New in ReClock DirectShow Filter 1.9.0.3 Beta (Jan 31, 2017)
- Change: MediaInfo estimator improved
- Fix: Built in estimator was enabled for file playback by default.
New in ReClock DirectShow Filter 1.9.0.2 Beta (Jan 5, 2017)
- Fix: MediaInfo estimator treated audio files as video files
New in ReClock DirectShow Filter 1.9.0.1 Beta (Jan 5, 2017)
- New: Retired the old Direct Show framerate estimator for file playback
- MediaInfo.dll (https://mediaarea.net/en/MediaInfo) is used instead
- Using the built-in estimator is no longer recommended for file playback
- Using the built-in estimator is no longer the default for file playback
- Windows 9x is no longer supported. May it rest in peace.
- New: Framerate cache was actually quite unusable.
- The behavior is changed:
- default framerate will no longer stored in cache
- setting a default framerate will not stop automatic detection, automatic
- detection will always override default framerate setting
- setting a framerate manually during playback will store it in the cache
- manually setting the framerate to "unknown/automatic" will delete if from the cache
- a manual framerate in the cache will stop automatic detection of the built-in estimator
- manually setting the framerate to "unknown" will enable automatic detection of the built-in estimator
New in ReClock DirectShow Filter 1.9.0.0 (Oct 27, 2016)
- New: ReClock found a new home at http://forum.redfox.bz
- New: Improved support for PowerDVD 16
- New: Replacement of default renderer with Windows 10
- New: Prevent possible dll side-load attack during installation
- Change (PowerDVD 10 and up): Replaces cladr.ax file.
- Fix: HD DVD playback with ArcSoft TMT & PowerDVD 7
New in ReClock DirectShow Filter 1.8.8.5 Beta (Apr 15, 2015)
- New: Support for PowerDVD 15
New in ReClock DirectShow Filter 1.8.8.4 Beta (May 1, 2014)
- New: Support for PowerDVD 14
New in ReClock DirectShow Filter 1.8.8.3 Beta (May 1, 2014)
- Fix: DS automatic framerate detection did not work, if manual framerate settings were used previously
New in ReClock DirectShow Filter 1.8.8.2 Beta (May 1, 2014)
- Change: Manual framerate settings override automatic framerate detection
New in ReClock DirectShow Filter 1.8.8.1 Beta (Jan 20, 2014)
- New: Better Support for 3D Blu-ray playpack with PowerDVD 10/11/12 & 13
New in ReClock DirectShow Filter 1.8.8.0 Beta (Apr 20, 2013)
- New: Support for ArcSoft TMT 6
- New: Support for PowerDVD 13
New in ReClock DirectShow Filter 1.8.7.9 Beta (Feb 20, 2012)
- New: Support for PowerDVD 12
New in ReClock DirectShow Filter 1.8.7.7 Beta (Jun 6, 2011)
- Fix: Support for ArcSoft TMT 3 and 5
New in ReClock DirectShow Filter 1.8.7.6 Beta (Jun 6, 2011)
- Fix: Support for PowerDVD 11
New in ReClock DirectShow Filter 1.8.7.5 Beta (May 17, 2011)
- New: Allow more than one instance of ReClock (experimental)
- Fix: Hang during uninstall, if TMT5 support wasn't installed
New in ReClock DirectShow Filter 1.8.7.4 Beta (May 17, 2011)
- New: Support for PowerDVD 11
- Fix: Installation hangs, if Windows Home Server add-in for Windows Media Center is installed
New in ReClock DirectShow Filter 1.8.7.3 Beta (Dec 3, 2010)
- New: Improved frame rate detection accuracy of the built-in estimator
New in ReClock DirectShow Filter 1.8.7.2 Beta (Nov 22, 2010)
- New: Added support for Arcsoft TMT 5 (experimental)
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.7.0 Beta (Jul 12, 2010)
- New: Improved refresh rate detection
- New: Improved TMT3 support
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.6.9 Beta (Jun 5, 2010)
- New: Improved software volume adjustment
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.6.8 Beta (May 31, 2010)
- New: Software volume adjustment, supports Kernel streaming, Wasapi and Wave out
- Change: Setting volume will be performed in software with WaveOut. DSound volume will still be done using DSound SetVolume() API.
- Note: Adjusting the volume works with players using the DSound volume inteface, e.g. Media Player Classic or Zoom player.
- New: Hitting the ESC key will close the properties window, if it has focus
- New: Clicking the notification icon will close the properties window, if open
- Fix: Setting for hardware resampling wasn't saved / loaded correctly
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.6.7 Beta (Mar 30, 2010)
- New: Installation of DSound / Wave support (replacing default renderers) can be disabled during setup
- New: Installation of TMT3 support can be disabled during setup
- New: Installation of PowerDVD support can be disabled during setup
- New: Save settings when leaving filter graph.
- Change: Send QUIT notification when leaving filter graph.
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.6.6 Beta (Mar 23, 2010)
- New: Added support for PowerDVD 10
- Fix: Option "Play media with bitstream audio at original speed" didn't work as expected
- Change: This option is renamed to "Disable media speed correction with bitstream audio (recommended)"
- Change: Default settings of some options
New in ReClock DirectShow Filter 1.8.6.5 Beta (Mar 20, 2010)
- New: Option "Play media with bitstream audio at original speed"
- New: Added sample VBS script using AnyDVD's SetDisplayFrequency tool.
- Note: With Windows 7, you must use the version which ships with AnyDVD 6.6.3.0 or better!
- Fix: Overflow in buffer calculation with buffer sizes > 600ms and high output sample rates
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.6.3 Beta (Feb 23, 2010)
- Fix: Possible crash
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.6.2 Beta (Feb 8, 2010)
- Changed: Quality settings for resampler
- Changed: Performance of resampler
- Changed: Performance of Wasapi playback
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.5.5 Beta (Dec 21, 2009)
- New: Added "audio only" mode, no part of the prebuffer will be skipped
- New: Added option to prohibit loading of ReClock without showing the application dialog, if an application isn't configured in the list
- Fix: Manually setting a sample rate different to the input rate could cause the audio hardware fail to initialise
New in ReClock DirectShow Filter 1.8.5.4 Beta (Dec 20, 2009)
- At least ReClockDS.dll seems to be required
New in ReClock DirectShow Filter 1.8.5.2 Beta (Dec 18, 2009)
- Improved support for Arcsoft TMT 3.0., added ReClockRedirect.dll which replaces the original ASAudioRenderer.dll
- Removed ReClockDS.dll, ReClockWV.dll, ReClockPW.dll, ReClockPW7.dll, ReClockPW8.dll, ReClockPW9.dll and ReClockAS.dll.
- Everything is now combined in ReClock.dll for better maintenance
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.5.1 Beta (Dec 14, 2009)
- New: Added support for Arcsoft TMT 3.0. Warning, this will probably not work for everyone!
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.5.0 Beta (Dec 13, 2009)
- New: Option to specify output sample rate.
- Note: Hardware resampling will always be disabled, if the output sample rate differs from the input sample rate
- New: AC3 encoder can be used with input rates different from 48 kHz
- New: Uninstall added to Windows add/remove programs
- Fix: HD DVD playback with ArcSoft TMT & PowerDVD 7
New in ReClock DirectShow Filter 1.8.4.8 Beta (Aug 17, 2009)
- New: Added support for PowerDVD 9
- New: Added support for PowerDVD 8 build 3017
- Change: Removed "Force ReClock to be loaded in PowerDVD" setting.
New in ReClock DirectShow Filter 1.8.4.7 Beta (Aug 7, 2009)
- Change: Improved speaker output configuration with WASAPI
- Change: Improved speaker mapping
- Change: Built-in estimator is now more accurate with higher frame rates
New in ReClock DirectShow Filter 1.8.4.6 Beta (Aug 6, 2009)
- Change: Improved speaker output configuration with WASAPI
- Change: Improved speaker mapping
- Change: Built-in estimator is now more accurate with higher frame rates
New in ReClock DirectShow Filter 1.8.4.5 Beta (Jun 5, 2009)
- New: Resampler normalizes to avoid clipping
- New: Built-in estimator detects 48 fps sources
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.4.4 Beta (May 6, 2009)
- New: Added two debug registry values for yesgrey3 and leeperry:
- ForceSampleRate (in kHz) and BypassResampler (0 or 1), both DWORDs
- Fix: Correct frame rate detection of HD DVDs played back with ArcSoft TMT or PowerDVD 7 (but not latest build)
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.4.3 Beta (May 5, 2009)
- New: Added two debug registry values for yesgrey3 and leeperry:
- ForceSampleRate (in kHz) and BypassResampler (0 or 1), both DWORDs
- Fix: Correct frame rate detection of HD DVDs played back with ArcSoft TMT or PowerDVD 7 (but not latest build)
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.4.2 Beta (Apr 9, 2009)
- New: Correct frame rate detection of HD DVDs played back with ArcSoft TMT or PowerDVD 7 (but not latest build)
- New: 24fps can be chosen as DVD default frame rate (for some Blu-ray discs)
- New: Added support for madVideoRenderer
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.4.1 Beta (Apr 1, 2009)
- Change: "Guessing a better media speed when hardware refresh rate does not match" is now enabled by default
- Fix: Setting default DVD frame rate did not work with BD/HD DVD media with ArcSoft TMT 2
- Fix: Option "Always output 16bit for 16bit sources" did not work correctly
- Fix: Option "Always output 16bit for 16bit sources" did not pass through audio bit exact
- Fix: Specifying an audio output format identical to the input format did not pass through audio bit exact
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.4.0 Beta (Mar 13, 2009)
- New: Installer adds desktop icon for config tool
- New: Added option to force 16bit PCM output for 16bit PCM sources
- New: Added option to allow VSYNC with DXVA (advanced tab)
- Fix: Some (but not all) lipsync issues when input format differs from output format
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.3.8 Beta (Feb 28, 2009)
- Major enhancements to WASAPI and WAVE playback
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.3.7 Beta (Feb 27, 2009)
- New: Replaced Kernel Streaming with WASAPI exclusive (Vista SP1 and up, experimental)
- New: reduced scratching noise when starting wave playback
- Fix: working buffers could be overwritten if media format changed during playback
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.3.6 Beta (Feb 21, 2009)
- New: Updated resampler to libsamplerate 0.1.7
- Change: Reverting to previous speaker configuration works better under Vista.
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.3.5 Beta (Feb 21, 2009)
- New: Added option to set matching speaker configuration for PCM sound using WaveOut or DirectSound.
- This is very useful if you use a 7.1 surround capable HDMI connector for sound playback, e.g. ATI Radeon 4xxxx.
- Works best with DSound output, but WaveOut is supported, too.
- New: DSound / WaveOut devices selection is maintained even if device order changes
- Change: Secondary streams will no longer open any audio device
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.3.3 Beta (Jan 30, 2009)
- Fix: Setting a default frame rate in config.exe disabled the built-in estimator
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.3.2 Beta (Jan 14, 2009)
- New: Setting a manual media frame rate will automatically disable the built in estimators
- Change: Resampler compiler tweaks
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.3.1 Beta (Jan 10, 2009)
- New: Updated resampler
- Change: Latency correction for AC3 encoder
- Change: Expiry date removed
- Fix: 32bit floating point audio from ffdshow did not work
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.3.0 Beta (Dec 3, 2008)
- New: ehrecvr service is now restarted, if it was stopped (see below)
- Change: ehrecvr service isn't brutally killed anymore, it is now stopped via the service manager (if running)
- Change: Expiry date changed to February 2009
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.2.9 Beta (Dec 2, 2008)
- New: Application loading dialog automatically closes after 10 seconds inactivity
- New: Application loading dialog will be visible in full screen applications, e.g. VMC
- New: Installer kills ehrecvr service, otherwise installation could fail
- New: Uninstaller kills ehrecvr service, otherwise uninstall could fail
- Fix: ReClock could hang when loaded from non interactive processes, e.g. VMC receiver service
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.2.8 Beta (Dec 2, 2008)
- Change: Some tweaks to hardware detection. It is recommeded to clear your timings cache.
- Fix: GDI and PStrip timings were not deleted when the timings cache was cleared.
New in ReClock DirectShow Filter 1.8.2.6 Beta (Nov 19, 2008)
- New: Application loading dialog is shown from a helper process, this fixes problems with some playback software
- Change: Some tweaks to hardware detection. It is recommeded to clear your timings cache.
- Change: Removed delay after display change notification because of undesired side effects
- Change: Removed saving of timings in regular intervals because of undesired side effects
- Fix: In multiple monitor configurations, first notify event could be triggered with the wrong monitor number
- Fix: Logging could have severe impact on performance
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.2.5 Beta / 1.6 (Nov 14, 2008)
- New: Added property sheet to define the keyboard shortcuts in the config tool
- New: Better error handling, if "preferred renderer" setting is changed
- Change: Default settings
- Change: As "Set ReClock as preferred renderer" is a system wide setting, it is now stored in HKLM
- Change: Expiry date changed to January 2009
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.2.4 Beta / 1.6 (Nov 13, 2008)
- Change: STOP events are only triggered from the primary stream
- Fix: "Load always" and "Never load" settings were reversed
- Fix: v1.8.2.3 could be loaded from ReClockHelper and Explorer
- Fix: v1.8.2.1 - 1.8.2.3 had some trouble with STOP events
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.2.3 Beta (Nov 12, 2008)
- New: Redesigned application loading mechansim.
- New: The hotkey to show the properties window (default is CTRL+ALT+SHIFT+R) will toggle the properties window
- New: Option to make ReClock the default renderer is back
- Fix: Crash of PowerDVD
New in ReClock DirectShow Filter 1.8.2.1 Beta / 1.6 (Oct 31, 2008)
- Fix: Bug introduced in 1.8.2.0, video renderer pin was not released on stop
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.2.0 Beta / 1.6 (Oct 29, 2008)
- New: Added display of DXVA media types in properties
- New: timings are saved in regular intervals, so they aren't lost in case of a player software crash
- Change: More tweaks to hardware detection, timings need to be stable to be accepted
- Change: Display change notification now triggered from separate thread with a short delay
- Change: logfile location will be the user's documents folder
- Change: trigger of RunEvent script delayed until ReClock knows the source dimensions
- Change: Improved Blu-ray & HD DVD playback with ArcSoft TMT
- Change: Thread priorities are no longer altered
- Change: Workaround for problem with ffdshow, video format is checked at regular intervals
- Fix: Vsync correction settings weren't saved
- Fix: Vsync correction was enabled for EVR and Haali if it was enabled for other renderers
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.1.9 Beta / 1.6 (Oct 22, 2008)
- Change: Some tweaks to hardware detection
- Change: Expiry date changed to December 2008
- Change: Method triggering DisplayChange() if RunEvent.vbs returns 0
- Fix: AC3 encoder didn't work correctly, if hardware resampling was previously enabled
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.1.6 Beta / 1.6 (Sep 30, 2008)
- Fix: Bug introduced in 1.8.1.5, CINEMA mode wasn't triggered
- Some fixes and improvements
New in ReClock DirectShow Filter 1.8.1.5 Beta / 1.6 (Sep 29, 2008)
- New: Rewritten hardware detection - again. This is a tricky piece of code, and I hope it'll work now on all machines.
- New: Added two new parameters for the RunEvent.vbs script - source width and source height. These values are set to 0, if the source dimension is unknown.
- New: Added keywords CINEMA(2x), NTSC(2x) and PAL(2x) for 48, 60 and 50fps sources
- New: PAL SpeedDown in media adaptation properties will convert PAL(2x) sources to CINEMA(2x) (50fps to 48fps)
- New: Built-in estimator is now working under Windows 98SE. Still supporting Windows 98 sounds crazy, but if you have an old PC you want to use as a DVD player without PAL chipmunk voices... :-)
- New: Added PowerDVD 6 support (for those people who want to use Windows 98 as a DVD player)
New in ReClock DirectShow Filter 1.8.1.3 Beta / 1.6 (Sep 26, 2008)
- New: Added "Use AC3 encoder" checkbox. The old way to select it (as PCM output method) was confusing, and ReClock didn't know which interface to use, if AC3 encoder had to be bypassed.
- New: Added option to AC3 encoder only to encode multi channel sources
- New: Added display resolution database, which can dramatically speed up the playback start, especially with ATI cards. This is a temporary solution until I figure out something better.
- Change: removed "accept old multichannel formats" checkbox. I consider these formats obsolete. May they rest in peace. ReClock will always reject them.
- Fix: passing the file name to the RunEvent.vbs script didn't work, if the path contained spaces
- Fix: Severe problem introduced with 1.8.1.2 which made the system default renderers unusable
- Various fixes and improvements
New in ReClock DirectShow Filter 1.8.1.2 Beta / 1.6 (Sep 24, 2008)
- New: Support for Blu-ray playback with ArcSoft TMT
- New: Added hotkey to show the properties window (default is CTRL+ALT+SHIFT+R)
- New: Hotkeys can be modified (currently via regedit only, sorry)
- New: Config tool doesn't need to run under admin account
- New: Added option to accept SPDIF as input (disabled by default). This is important, because Windows Media player under Vista will always try to use SPDIF if possible, which isn't quite the right way when using ReClock.
- Change: Removed obsolete option to make ReClock the default renderer
- Change: uses proper OS function to register the hotkeys to avoid conflicts. As a side effect, this could cause slightly improved playback
- Change: logfile location will be the user's desktop
- Fix: Sync problems when using the real time AC3 encoder. Fixes startup problems with PowerDVD and TMT. Works fine now! :-)
- Fix: Access rights for registry keys weren't set correctly (Windows Vista)
- Various fixes and improvements
New in ReClock DirectShow Filter 1.8.1.1 Beta / 1.6 (Sep 22, 2008)
- New (experimental): Added real time AC3 encoding. Only bitrates of 48kHz and up to 6 channel input is supported. Doesn't seem to work well with PowerDVD.
- New: Frame rates detected by the estimators can now be adjusted manually
- Support for ~120fps anime with built-in estimator
- Some minor fixes and improvements
New in ReClock DirectShow Filter 1.8.1.0 Beta / 1.6 (Sep 18, 2008)
- New: Remember setting of "PAL Speeddown" setting in sound adaption properties
- Change: Using DirectDraw instead of Direct 3D as the default hardware access method
- Fix: Possible deadlock, if RunEvent script exited with 0 (display mode changed)
New in ReClock DirectShow Filter 1.8.0.9 beta (Sep 16, 2008)
- Version 1.8.0.9 beta
- Fix: Sound distortion with DirectSound output at high sample rates
- Minor fixes and improvements
New in ReClock DirectShow Filter 1.8.0.9 beta (Sep 16, 2008)
- New: Updated resampler
- Fix: PAL Speeddown didn't work properly
- Fix: TheaterTek didn't work
- Some minor fixes and improvements
New in ReClock DirectShow Filter 1.8.0.8 beta (Sep 15, 2008)
- Fix: Sound distortion with DirectSound output at high sample rates
- Minor fixes and improvements