Softpedia >Windows >Programming >Other Programming Files >Visuino >  Changelog

Visuino Changelog

What's new in Visuino 8.0.0.100

Dec 5, 2023
  • Improved IDE performance
  • Added option to Import and Export Sub Diagrams.
  • Added option to set icons for Sub Diagrams.
  • Added option to arrange the position of the sub diagram tabs.
  • Improved Sub Diagram support.
  • Added Arduino Nano ESP32 support
  • Added M5Stack CoreS3 support
  • Added Arduino Opta Lite, RS485, and WiFi PLCs
  • Added support for Adafruit QT Py ESP32-C3
  • Added initial JPEG support
  • Improved I2C support
  • Added support for LCJ Serial Port Anemometer
  • Added ILI9342 SPI display support
  • STM32 Updated to use the latest platform libraries
  • Added ESP32 Long Range WiFi and ESPNow support
  • Improved Seeed XIAO ESP32 C3 implementation
  • Added Adafruit Metro ESP32-S2 support
  • Added Generic ESP32-S2 support
  • Added Generic ESP32-S3 support
  • Added M5Stack Atom Base support
  • Added MMC interface MicroSD support
  • Added ESP32Cam support
  • Added support for I2C speed for platforms that support it
  • Added support for Sub Diagrams custom icons
  • Improved EEPROM support
  • Improved replacing of elements – automatically changing the name when applicable
  • Added WriteReceived to the Modbus Holding Registers and Coils
  • Added IgnoreDC to FFT
  • Improved FFT implementation
  • Added support for LTR-553ALS-WA/LTR-556ALS-WA LITE-ON Light and Proximity Sensor(I2C)
  • Improved Modbus support for ESP32
  • Added Analog Array To Text and Complex Array To Text converters
  • Added support for XY-LPWM/VHM-800/HW-753 PWM Signal Generator Module
  • Added support for XY-LPWM3 – 3 channel PWM Signal Generator Module
  • Added Olimex ESP32-POE Ethernet board support
  • Added Bosch BMI270 Accelerometer Gyroscope support
  • Added Elegoo Smart Car V4 ESP32 Camera support
  • Added Adafruit Kee Boar KB2040 support
  • Added Waveshare RP2040-Matrix RGB 5×5 support
  • Added Adafruit GEMMA M0 support
  • Added Awinic AW9523 GPIO Expander and LED Driver support
  • Added Sharp Optical Dust Sensor GP2Y1010AU0F/Ks0196 Keyestudio support
  • Added Sharp Reflective Optical Distance Meter GP2Y0A02YK0F/GP2Y0A21YK0F/GP2Y0A710K0F/GP2YA41SK0F support
  • Added stand alone General Vision Neuro Shield Neurons (SPI) component allowing the shield to be used as a module
  • Added support for displaying video and images on the graphics displays
  • Added Change Image Format component
  • Added Image to JPEG component
  • Added Image Snapshot
  • Improved support for all RP2040 boards
  • Improved support for Arduino Portenta H7 – Added RTC support
  • Improved Seeed XIAO ESP32 C3 support
  • Added Audio Snapshot component

New in Visuino 8.0.0.93 (Jul 31, 2023)

  • Huge user interface improvements over the entire IDE
  • Added option to display the Component Toolbar as Tree View
  • Added advanced search in the Visuino Design view allowing to search for components, properties and elements
  • Improved search in the generated code view
  • Updated to use the latest Arduino-CLI
  • Added initial support for OTA Upload to the Visuino IDE
  • OTA improvements
  • Added search option for all terminal windows
  • Added search option for the CustomCode component
  • Improved Component Toolbar with option to specify the name when adding components from it
  • Improved Element Editors with option to specify the name when adding elements
  • Improved Properties Inspector with added support for property icons
  • Added Audio support, and initial set of components
  • Added ESP I2S, and PDM support
  • Improved support for MAC and IP Address bindings
  • Redesigned Interrupt support
  • Added Base64 encode/decode components
  • Reduced memory usage by the generated code
  • Improved *.vcomp files support
  • Added Interpolate Analog component
  • Step/Iterate Complex Array Items component
  • Get Complex Array Item At Index component
  • Added Binary Insert In Items component
  • Added Step/Iterate Binary Items component
  • Added Get Binary Item At Index component
  • Added Split Binary Bytes component
  • Added Min and Max reached pins to the Counters and Rotary Encoder components
  • Improved Arduino Nano 33 IOT implementation
  • Improved BBC Micro:Bit, Raspberry Pi, and Arduino 101 implementation
  • Improved ESP Now support
  • Added ESP32 Wired Ethernet support
  • Added ESP32 WPA2 Enterprise WiFi support
  • Added M5 Stack Core 2 support
  • Added support for SensOper SC-EN-I6-TO4-E, and SC-SE-I8-AM6-TO2 ESP32 PLC Controllers
  • Added Keyboard and Mouse modules for the STM32 boards
  • Added WT32-ETH01 Ethernet (ESP32) board support
  • Added Split Text To Chars component
  • Added Text TCP/IP IPv4 Address To Unsigned component
  • Added Unsigned TCP/IP IPv4 Address To Text component
  • Added Split Unsigned TCP/IP IPv4 Address To Octets component
  • Added Merge Octets To Unsigned TCP/IP IPv4 Address component
  • Added Merge Octets To Text TCP/IP IPv4 Address component
  • Improved Ethernet Shield implementation
  • Added Triangle, Sine, and Square Complex Generator components
  • Added Shenzhen Yongfukang Technology I2S Mono Audio Amplifier (Speaker) NS4168 support
  • Added Knowles I2S Mono Audio Microphone – SPH0645LM4H support
  • Added Knowles PDM Mono Audio Microphone – SPM1423HM4H support
  • Added M5Stack Ultrasonic Ranger(Ping) Unit component
  • Added 2D Distance component
  • Added Accumulate(Integral) Complex component
  • Added Maxim Integrated I2S Mono Audio Amplifier (Speaker) MAX98357A/MAX98357B support
  • Added Maxim MAX31865 RTD PT100/PT1000 Resistance Thermometer(SPI) support
  • Added Radio Time DCF77 support
  • Added Texas Instruments ADC ADS1113 (I2C), and Texas Instruments ADC ADS1114 (I2C) support
  • Added Maxim MAX31865 RTD PT100/PT1000 Resistance Thermometer
  • Added support for changing Teensy 3.X PWM Resolution and Frequency
  • Added a large number of other components
  • Improved Texas Instruments ADC ADS1015 Auto Scan (I2C) support
  • Improved MAX31855 Thermocouple Amplifier support
  • Added multitouch support
  • Added more array manipulation components
  • Added ACS712 Current Meter
  • Added Complex Change Only component
  • Updated to the latest NeoPixels library
  • Improved NeoPixels support
  • Added NeoPixels and Maxim LED Graphics Mirroring, and Structure settings
  • Improved graphics font support
  • Added Arduino NeuroShield 1728 RBF
  • Improved Raspberry Pi RP2040 support
  • Added Raspberry Pi RP2040 Pico W WiFi support
  • Improved Digispark support
  • Improved Seeed Studio Wio Terminal Xiao M0 support
  • Improved IDE performance
  • Improved IDE stability
  • Added automatic removal for some unavailable platform indexes
  • Expanded RemoteXY Support
  • Improved Binary To Text converter
  • Improved Text To Char converter
  • Improved Pressure To Altitude component
  • Improved Old Visuino versions updater
  • Improved overall user interface
  • Improved Sub Diagrams support
  • Added Copy and Paste for component elements
  • Added automatic substitution for more elements when replacing components
  • Improved Replace for Structure and Packet components, allowing you to change from Structure to Packet and Make Split while preserving all the channels
  • Improved Packet Unpacket implementation
  • Improved Boards and Libraries management
  • Improved code generation
  • Improved Installer
  • More components and classes moved to *.vcomp implementation, and made open source

New in Visuino 8.0.0.91 (Jul 16, 2023)

  • Huge user interface improvements over the entire IDE
  • Added option to display the Component Toolbar as Tree View
  • Added advanced search in the Visuino Design view allowing to search for components, properties and elements
  • Improved search in the generated code view
  • Updated to use the latest Arduino-CLI
  • Added initial support for OTA Upload to the Visuino IDE
  • Added search option for all terminal windows
  • Added search option for the CustomCode component
  • Improved Component Toolbar with option to specify the name when adding components from it
  • Improved Element Editors with option to specify the name when adding elements
  • Improved Properties Inspector with added support for property icons
  • Added Audio support, and initial set of components
  • Added ESP I2S, and PDM support
  • Improved support for MAC and IP Address bindings
  • Redesigned Interrupt support
  • Added Base64 encode/decode components
  • Reduced memory usage by the generated code
  • Improved *.vcomp files support
  • Added Interpolate Analog component
  • Step/Iterate Complex Array Items component
  • Get Complex Array Item At Index component
  • Added Binary Insert In Items component
  • Added Step/Iterate Binary Items component
  • Added Get Binary Item At Index component
  • Added Split Binary Bytes component
  • Added Min and Max reached pins to the Counters and Rotary Encoder components
  • Improved Arduino Nano 33 IOT implementation
  • Improved BBC Micro:Bit, Raspberry Pi, and Arduino 101 implementation
  • Improved ESP Now support
  • Added ESP32 Wired Ethernet support
  • Added ESP32 WPA2 Enterprise WiFi support
  • Added M5 Stack Core 2 support
  • Added support for SensOper SC-EN-I6-TO4-E, and SC-SE-I8-AM6-TO2 ESP32 PLC Controllers
  • Added Keyboard and Mouse modules for the STM32 boards
  • Added WT32-ETH01 Ethernet (ESP32) board support
  • Added Split Text To Chars component
  • Added Text TCP/IP IPv4 Address To Unsigned component
  • Added Unsigned TCP/IP IPv4 Address To Text component
  • Added Split Unsigned TCP/IP IPv4 Address To Octets component
  • Added Merge Octets To Unsigned TCP/IP IPv4 Address component
  • Added Merge Octets To Text TCP/IP IPv4 Address component
  • Improved Ethernet Shield implementation
  • Added Triangle, Sine, and Square Complex Generator components
  • Added Shenzhen Yongfukang Technology I2S Mono Audio Amplifier (Speaker) NS4168 support
  • Added Knowles I2S Mono Audio Microphone – SPH0645LM4H support
  • Added Knowles PDM Mono Audio Microphone – SPM1423HM4H support
  • Added M5Stack Ultrasonic Ranger(Ping) Unit component
  • Added 2D Distance component
  • Added Accumulate(Integral) Complex component
  • Added Maxim Integrated I2S Mono Audio Amplifier (Speaker) MAX98357A/MAX98357B support
  • Added Maxim MAX31865 RTD PT100/PT1000 Resistance Thermometer(SPI) support
  • Added Radio Time DCF77 support
  • Added Texas Instruments ADC ADS1113 (I2C), and Texas Instruments ADC ADS1114 (I2C) support
  • Added Maxim MAX31865 RTD PT100/PT1000 Resistance Thermometer
  • Added support for changing Teensy 3.X PWM Resolution and Frequency
  • Added a large number of other components
  • Improved Texas Instruments ADC ADS1015 Auto Scan (I2C) support
  • Improved MAX31855 Thermocouple Amplifier support
  • Added multitouch support
  • Added more array manipulation components
  • Added ACS712 Current Meter
  • Added Complex Change Only component
  • Added Arduino NeuroShield 1728 RBF
  • Improved Raspberry Pi RP2040 support
  • Added Raspberry Pi RP2040 Pico W WiFi support
  • Improved Digispark support
  • Improved Seeed Studio Wio Terminal support
  • Improved IDE performance
  • Expanded RemoteXY Support
  • Improved Binary To Text converter
  • Improved Text To Char converter
  • Improved Pressure To Altitude component
  • Improved Old Visuino versions updater
  • Improved overall user interface
  • Improved Sub Diagrams support
  • Added Copy and Paste for component elements
  • Added automatic substitution for more elements when replacing components
  • Improved Replace for Structure and Packet components, allowing you to change from Structure to Packet and Make Split while preserving all the channels
  • Improved Packet Unpacket implementation
  • Improved Boards and Libraries management
  • Improved code generation
  • Improved Installer
  • More components and classes moved to *.vcomp implementation, and made open source

New in Visuino 8.0.0.90 (Jul 8, 2023)

  • Huge user interface improvements over the entire IDE
  • Added option to display the Component Toolbar as Tree View
  • Added advanced search in the Visuino Design view allowing to search for components, properties and elements
  • Improved search in the generated code view
  • Updated to use the latest Arduino-CLI
  • Added initial support for OTA Upload to the Visuino IDE
  • Added search option for all terminal windows
  • Added search option for the CustomCode component

New in Visuino 8.0.0.89 (Jul 2, 2023)

  • Huge user interface improvements over the entire IDE
  • Added option to display the Component Toolbar as Tree View
  • Huge user interface improvements over the entire IDE
  • Added option to display the Component Toolbar as Tree View

New in Visuino 8.0.0.83 (Sep 20, 2022)

  • Added ESP32 C3 support
  • Upgraded ESP32 support
  • Added ESP Now support for ESP32 and ESP8266
  • Significantly improved WiFi support for ESP32 and ESP8266
  • Improved Seeeduino XIAO SAMD21 support
  • Improved Seeed XIAO RP2040 support
  • Improved QT Py 2040 support
  • Improved QT Py SAMD21 support
  • Added Seeed XIAO ESP32 C3 support – https://www.seeedstudio.com/Seeed-XIAO-ESP32C3-p-5431.html
  • Added Seeed Studio XIAO Expansion board support – https://www.seeedstudio.com/Seeeduino-XIAO-Expansion-board-p-4746.html

New in Visuino 8.0.0.82 (Sep 1, 2022)

  • Important bug fixes!
  • Added Adafruit I2C and SPI LCD Backpack components
  • Added Adafruit I2C 5 Buttons Keypad LCD/RGB LCD Display Shield support
  • Added Microchip MCP3422, MCP3423, MCP3424, MCP3426, MCP3427, and MCP3428 I2C ADC components
  • Added Microchip MCP23009, and MCP23018 I2C GPIO components
  • Added Microchip MCP230S08, MCP230S09, MCP230S17, and MCP230S18 SPI GPIO components
  • Added PCA9674, PCA9674A, and PCA9675 I2C GPIO components
  • Added PLC-X AI ADC (I2C) Module support
  • Added PLC-X DIO GPIO (I2C) Module support
  • Added PLC-X DIO 1.4 support
  • Added PLC-X IOT (ESP32) support
  • Added PLC-X RpiControl support
  • Added LC Technology ESP8266 4 Channel WiFi Relay board support
  • Added LC Technology ESP8266 8 Channel WiFi Relay board support
  • Added Leonardo TinyLab Board support
  • Added Texas Instrument Thermometer LM75(I2C) component
  • Added Interrupt support for the ATmega32U4 based boards
  • Added DeleteOneInputPin to the Char To Text component
  • Added SPI Speed to Analog Devices ADXL345 Accelerometer(SPI)
  • Redesigned GPIO to reduce memory usage in the generated code!
  • Improved M5Stack Core support
  • Improved Sequence Repeat functionality
  • Significantly improved IDE Performance!

New in Visuino 8.0.0.81 (Aug 26, 2022)

  • Added Adafruit I2C and SPI LCD Backpack components
  • Added Adafruit I2C 5 Buttons Keypad LCD/RGB LCD Display Shield support
  • Added Microchip MCP3422, MCP3423, MCP3424, MCP3426, MCP3427, and MCP3428 I2C ADC components
  • Added Microchip MCP23009, and MCP23018 I2C GPIO components
  • Added Microchip MCP230S08, MCP230S09, MCP230S17, and MCP230S18 SPI GPIO components
  • Added PCA9674, PCA9674A, and PCA9675 I2C GPIO components
  • Added PLC-X AI ADC (I2C) Module support
  • Added PLC-X DIO GPIO (I2C) Module supportAdded PLC-X DIO 1.4 support
  • Added PLC-X IOT (ESP32) support
  • Added PLC-X RpiControl support
  • Added LC Technology ESP8266 4 Channel WiFi Relay board support
  • Redesigned GPIO to reduce memory usage in the generated code!
  • Improved M5Stack Core support

New in Visuino 8.0.0.80 (Aug 17, 2022)

  • Added Adafruit I2C and SPI LCD Backpack components
  • Added Adafruit I2C 5 Buttons Keypad LCD/RGB LCD Display Shield support
  • Added Microchip MCP3422, MCP3423, MCP3424, MCP3426, MCP3427, and MCP3428 I2C ADC components
  • Added Microchip MCP23009, and MCP23018 I2C GPIO components
  • Added Microchip MCP230S08, MCP230S09, MCP230S17, and MCP230S18 SPI GPIO components
  • Added PCA9674, PCA9674A, and PCA9675 I2C GPIO components
  • Added PLC-X AI ADC (I2C) Module support
  • Added PLC-X DIO GPIO (I2C) Module support
  • Added PLC-X DIO 1.4 support
  • Added PLC-X IOT (ESP32) support
  • Added PLC-X RpiControl support
  • Added LC Technology ESP8266 4 Channel WiFi Relay board support
  • Added LC Technology ESP8266 8 Channel WiFi Relay board support
  • Added Leonardo TinyLab Board support
  • Added Texas Instrument Thermometer LM75(I2C) component
  • Added Interrupt support for the ATmega32U4 based boards
  • Added DeleteOneInputPin to the Char To Text component
  • Added SPI Speed to Analog Devices ADXL345 Accelerometer(SPI)
  • Redesigned GPIO to reduce memory usage in the generated code
  • Improved M5Stack Core support
  • Improved Sequence Repeat functionality
  • Significantly inproved IDE Performance

New in Visuino 8.0.0.78 (May 8, 2022)

  • Significantly Improved IDE Speed and user interface
  • The generated code uses Less RAM
  • Added option to Enable/Disable board indexes
  • Added Seeeduino Wio Terminal
  • Added Arduino Portenta H7
  • Added Arduino UNO WiFi Rev.2 support
  • ​Added Canaduino PLC 500 support
  • Added ESP32 WeMos D1 and ESP32 WeMos D1 Mini support
  • Added RP2040 RTC support
  • Added RP2040 Processor Software Reset, Sleep Mode and Watchdog support
  • Added SAMD Processor module
  • Added STM32 Processor module
  • Added Software Reset for SAMD based boards
  • Added Get Processor ID operations
  • Improved RP2040 USB Serial support
  • Improved Teensy USB Serial support
  • Improved Teensy GPIO support
  • Improved Secured Sockets support
  • Improved Controllino support
  • Completely redesigned Teensy support without the need of Teensyduino to be installed
  • Added Teensy Processor Restart and Reboot operations
  • Added Analog Integrator and Differentiator components
  • Added PCA9633 I2C RGB Led Controller support
  • Added JHD1214 I2C LCD Display support
  • Added Seeeduino Grove 16X2 LCD RGB Backlight Full Color Display support
  • Added Add Value elements to the Set Value, Counter, and Rotary Encoder components
  • Added support for connecting USB Keyboard and Mouse to Samd boards
  • Added Random Alpha Color, and Random RGBW Alpha Color generators
  • Added Ramp To Value Alpha Color, and RGBW Alpha Color components
  • Added Alpha Color, and RGBW Alpha Color converters
  • Added Color to RGBWColor converter component
  • Improved Display Orientation support
  • Added 3D to 2D Orientation converters
  • Added RGBW Alpha Color support
  • Added WrapArround to the 'Extract Sub Text' component, allowing easy implementation of scrolling text
  • Added Clock Structure, and Package elements allowing easy RPC implementation
  • Added Alpha Color, and RGBW Alpha Color Structure, and Package elements
  • Added Alpha Color, and RGBW Alpha Color memory elements
  • Added RGBW Color Value Array
  • Added Color To RGBW Color converter
  • Improved LSM6DS3 support
  • Automatic components path checks at startup
  • Improved Arduino Configuration dialog
  • Added option to copy the HEX File Name Path for simplified usage in Proteus and other hardware simulators
  • More component definitions are now made open source
  • Added support for namespace attributes in the component definitions
  • Simplified component definitions
  • Improved automatic Board Index files support

New in Visuino 8.0.0.74 (Apr 22, 2022)

  • Significantly Improved IDE Speed and user interface
  • The generated code uses Less RAM
  • Added option to Enable/Disable board indexes
  • Added Seeeduino Wio Terminal
  • Added Arduino Portenta H7
  • Added Arduino UNO WiFi Rev.2 support
  • ​Added Canaduino PLC 500 support
  • Added ESP32 WeMos D1 and ESP32 WeMos D1 Mini support
  • Added RP2040 RTC support
  • Added RP2040 Processor Software Reset, Sleep Mode and Watchdog support
  • Added SAMD Processor module
  • Added STM32 Processor module
  • Added Software Reset for SAMD based boards
  • Added Get Processor ID operations
  • Improved RP2040 USB Serial support
  • Improved Teensy USB Serial support
  • Improved Teensy GPIO support
  • Improved Secured Sockets support
  • Improved Controllino support
  • Completely redesigned Teensy support without the need of Teensyduino to be installed
  • Added Teensy Processor Restart and Reboot operations
  • Added Analog Integrator and Differentiator components
  • Added PCA9633 I2C RGB Led Controller support
  • Added JHD1214 I2C LCD Display support
  • Added Seeeduino Grove 16X2 LCD RGB Backlight Full Color Display support
  • Added Add Value elements to the Set Value, Counter, and Rotary Encoder components
  • Added support for connecting USB Keyboard and Mouse to Samd boards
  • Added Random Alpha Color, and Random RGBW Alpha Color generators
  • Added Ramp To Value Alpha Color, and RGBW Alpha Color components
  • Added Alpha Color, and RGBW Alpha Color converters
  • Added Color to RGBWColor converter component
  • Improved Display Orientation support
  • Added 3D to 2D Orientation converters
  • Added RGBW Alpha Color support
  • Added WrapArround to the 'Extract Sub Text' component, allowing easy implementation of scrolling text
  • Added Clock Structure, and Package elements allowing easy RPC implementation
  • Added Alpha Color, and RGBW Alpha Color Structure, and Package elements
  • Added Alpha Color, and RGBW Alpha Color memory elements
  • Added RGBW Color Value Array
  • Added Color To RGBW Color converter
  • Improved LSM6DS3 support
  • Automatic components path checks at startup
  • Improved Arduino Configuration dialog
  • Added option to copy the HEX File Name Path for simplified usage in Proteus and other hardware simulators
  • More component definitions are now made open source
  • Added support for namespace attributes in the component definitions
  • Simplified component definitions
  • Improved automatic Board Index files support

New in Visuino 8.0.0.73 (Apr 16, 2022)

  • Significantly Improved IDE Speed and user interface
  • The generated code uses Less RAM
  • Added option to Enable/Disable board indexes
  • Added Seeeduino Wio Terminal
  • Added Arduino Portenta H7
  • Added Arduino UNO WiFi Rev.2 support
  • ​Added Canaduino PLC 500 support
  • Added ESP32 WeMos D1 and ESP32 WeMos D1 Mini support
  • Added RP2040 RTC support
  • Added RP2040 Processor Software Reset, Sleep Mode and Watchdog support
  • Added SAMD Processor module
  • Added STM32 Processor module
  • Added Software Reset for SAMD based boards
  • Added Get Processor ID operations
  • Improved RP2040 USB Serial support
  • Improved Teensy USB Serial support
  • Improved Teensy GPIO support
  • Improved Secured Sockets support
  • Improved Controllino support
  • Completely redesigned Teensy support without the need of Teensyduino to be installed
  • Added Teensy Processor Restart and Reboot operations
  • Added Analog Integrator and Differentiator components
  • Added PCA9633 I2C RGB Led Controller support
  • Added JHD1214 I2C LCD Display support
  • Added Seeeduino Grove 16X2 LCD RGB Backlight Full Color Display support
  • Added Add Value elements to the Set Value, Counter, and Rotary Encoder components
  • Added support for connecting USB Keyboard and Mouse to Samd boards
  • Added Random Alpha Color, and Random RGBW Alpha Color generators
  • Added Ramp To Value Alpha Color, and RGBW Alpha Color components
  • Added Alpha Color, and RGBW Alpha Color converters
  • Added Color to RGBWColor converter component
  • Improved Display Orientation support
  • Added 3D to 2D Orientation converters
  • Added RGBW Alpha Color support
  • Added WrapArround to the 'Extract Sub Text' component, allowing easy implementation of scrolling text
  • Added Clock Structure, and Package elements allowing easy RPC implementation
  • Added Alpha Color, and RGBW Alpha Color Structure, and Package elements
  • Added Alpha Color, and RGBW Alpha Color memory elements
  • Added RGBW Color Value Array
  • Added Color To RGBW Color converter
  • Improved LSM6DS3 support
  • Automatic components path checks at startup
  • Improved Arduino Configuration dialog
  • Added option to copy the HEX File Name Path for simplified usage in Proteus and other hardware simulators
  • More component definitions are now made open source
  • Added support for namespace attributes in the component definitions
  • Simplified component definitions
  • Improved automatic Board Index files support

New in Visuino 8.0.0.37 (Nov 16, 2021)

  • Improved IDE Speed and user interface
  • The generated code in many cases uses Less RAM
  • Expanded Image Data support
  • Added Fingerprint Reader support
  • Added MCP9808 I2C Thermometer component
  • Added TTP226 Touchpad component
  • Added TTP229 Touchpad components(Serial and I2C)
  • Added DS3502 Digital I2C Potentiometer component
  • Added SGP30 I2C Air Quality Sensor component
  • Expanded and improved JSON support
  • Added Image to Binary and Binary to Image converters
  • Added Digital To Binary component
  • Added Extract Image Info component
  • Added Array Memory elements
  • Added initial 64 bit integer/Unsigned support
  • Added more Array type components
  • Added Binary data Insert/Remove/Replace element components
  • Added Binary Snapshot component
  • Added Binary Multi Source component
  • Added Remember Binary Data(Array) component
  • Added Binary On/Off and Toggle Switch components
  • Added Binary Demux components
  • Added Binary Mux components
  • Added Analog Array To Binary and Complex Array To Binary components
  • Added Array Replace components
  • Improved ESP8266 and ESP32 SSL support
  • Added ESP8266 Network Time support
  • Improved AirLift WiFi support
  • Added Flash and EEPROM support for binary data
  • Improved Internet Time support
  • Added support for Millisecongs Unix Time
  • Added Absolute Humidity component
  • Added Elegoo SmartCar V4 WiFi shield
  • Updated Packet/Unpacket implementation
  • Improved Remember implementation
  • Added ESP32 WiFi Transmit Power setting
  • Added ESP8266 WiFi Transmit Power, and Physical Mode settings
  • Added 3D Value component
  • Added Daylight Offset to Internet and Network Time
  • Improved Sub Diagrams support

New in Visuino 8.0.0.31 (Aug 22, 2021)

  • Improved IDE Speed and user interface
  • Added Adafruit Airlift Nina ESP32 Module
  • Added Adafruit AirLift Shield ESP32 WiFi
  • Added Adafruit AirLift Feather Wing ESP32 WiFi
  • Added Adafruit AirLift Itsy Bitsy ESP32 WiFi shield
  • Added Adafruit Feather 328P
  • Added Adafruit Feather RF52
  • Added Adafruit Metro M4 Express
  • Added Adafruit Metro M4 Express AirLift WiFi
  • Added Adafruit Metro M4 Grand Central
  • Improved Feather Wings support
  • Added Arduino MKR1010 WiFi support
  • Added Arduino Nano 33 IoT support
  • Added QMC5883/GY-271 Compass component
  • Improved HMC5883/GY-273 Compass component
  • Added Array Snapshot components
  • Added Remember Array components
  • Added Compare Byte Value component
  • Added Byte Multi Merger component
  • Added Seeeduino Lotus Grove board
  • Added Seeeduino Lotus Grove composite KIT as board
  • Added Seeed Studio RP2040 XIAO support
  • Improved Raspberry Pi RP2040 Pico support
  • Added Orientation 3D support
  • Added large number of Orientation 2D and Orientation 3D components
  • Added On Disable functionality for all generators that can use it
  • Added support for a number of direct pin modules
  • Added LSM6DS3 Accelerometer/Gyroscope I2C and SPI components
  • Improved Grove support
  • Added Seeeduino DHT11 Grove module
  • Added Seeeduino OLED SSD1315 Display Grove module
  • Added Seeeduino LIS3DH Accelerometer Grove module
  • Added Seeeduino Grove Buzzer module
  • Added Seeeduino Grove LED module
  • Added Seeeduino BMP280 Air Pressure module
  • Added Seeeduino Grove Light Sensor module
  • Added Seeeduino Grove Microphone module
  • Added Seeeduino Grove Potentiometer module
  • Added Complex Array filters
  • Added Laser component
  • Added Get Host IP operation
  • Added ESP32 WiFi Low Power mode support
  • Improved BNO55 Accelerometer/Gyroscope support
  • Improved ESP8266 Generic implementation
  • Reduced memory usage
  • Added more board specific icons
  • Improved recovery of some damaged Visuino files
  • Improved error reporting in the IDE
  • Number of bug fixes in the IDE

New in Visuino 8.0.0.23 (Jun 7, 2021)

  • Completely redesigned to use brand new easy ti implement pure text component definitions
  • Complete redesign of most of the components to use the new text definitions
  • All text defined components are now made open source
  • Improved IDE Speed and user interface
  • Added Raspberry Pi Pico RP2040 support
  • Added Adafruit Feather RP2040 support
  • Added Adafruit ItsyBitsy RP2040 support
  • Added Pimoroni Tiny 2040 support
  • Added Adafruit QT Py 2040 support
  • Added SparkFun Micro Pro - RP2040 support
  • Added SparkFun Thing Plus - RP2040 support
  • Added Generic RP2040 Board support
  • Added Arduino MKR ZERO support
  • Added Atmel SAMD21 RTC support
  • Added Adafruit ItsyBitsy 32u4 - 5V support
  • Added Adafruit ItsyBitsy 32u4 - 3V support
  • Added Adafruit ItsyBitsy M0 Express support
  • Added Adafruit ItsyBitsy M4 Express support
  • Added Adafruit QT Py - SAMD21 support
  • Added Seeeduino XIAO support
  • Added Adafruit Feather HUZZAH32 support
  • Added Teensy 4.1 support
  • Improved Adafruit Feather M0 support
  • Added Bedac - PLC-DIO A13/7 as board
  • Added Makerfabs MakePython ESP32 support
  • Added INA3221, INA260, INA226, INA230 and INA231 Voltage/Current/Power modules support
  • Improved Infrared Remote support
  • Improved ML8511 UV Light sensor support
  • Improved BNO055 support
  • Improved ESPCopter support

New in Visuino 8.0.0.2 (Nov 29, 2020)

  • Up to 60 Times faster loading of big projects in the IDE
  • Significantly improved IDE Speed and user interface
  • Added RGBDuino support
  • Improved Interrupt support for ESP8266 and ESP32
  • Added visual live binding for I2C Address value
  • Improved GPS implementation
  • Improved ViSi Genie 4D Systems support
  • Added visual live binding for ViSi Genie 4D Systems element indexes
  • Improved UDP Socket
  • Improved TCP Server Socket
  • Improved support for M5Stack NeoPixel modules
  • Improved Graphics support
  • Improved VL53L0X support
  • Improved MQTT support
  • Improved DHT11/21/22/AM2301 support

New in Visuino 8.0.0.0 (Nov 26, 2020)

  • Up to 60 Times faster loading of big projects in the IDE
  • Significantly improved IDE Speed and user interface
  • Added RGBDuino support
  • Improved Interrupt support for ESP8266 and ESP32
  • Added visual live binding for I2C Address value
  • Improved GPS implementation
  • Improved ViSi Genie 4D Systems support
  • Added visual live binding for ViSi Genie 4D Systems element indexes
  • Improved UDP Socket
  • Improved TCP Server Socket
  • Improved support for M5Stack NeoPixel modules

New in Visuino 7.8.3.69 (Sep 18, 2020)

  • Reduced memory usage by the generated code
  • Improved IDE Speed and user interface
  • Added ESP-01 Temperature/Humidity DHT22 Shield support
  • Improved Raspberry Pi support
  • Improved DHT11/21/22 implementation
  • Improved Unpacked and Split Structure components
  • Improved DetectEdge implementation
  • Improved Counters implementation
  • Improved Array componnts
  • Improved Ignore Range Char componnt
  • Improved Text Memory Element
  • Improved Virtual Serial componnt
  • Improved LIN implementation
  • Improved Parallel LCD component
  • Improved AD7606 implementation
  • Improved FT800 display implementation
  • Added -UNREGISTERED command line option to start the IDE in Free unregistered mode (Can be used to participate in Free Version competitions)

New in Visuino 7.8.3.64 (Aug 24, 2020)

  • Added RaspberryPi Console and Sockets support
  • Added TTGO T-Display ESP32 support
  • Added ST7789 Display support
  • Added support for the 4DOF Manipulator Potentiometer and Servos Shield
  • Added Reverse for the all the Servo components and elements
  • Improved RemoteXY support
  • Added support for the Optic Flow PMW3901 sensor
  • Added initial Video and Image Processing support
  • Added STM32 RTC Support
  • Added UV Light Sensor Lapis ML8511 support
  • Added ESP8285 support
  • Improved Controllino support
  • Added EndOnNewLine, and Ending text elements to the Char To Text component
  • Improved STM32 Support
  • Added Interval Output Pin to the Sequence
  • Added Sonoff Smart Socket S26 (ESP8266)
  • Added ESP-01 Temperature/Humidity DHT11 Shield support
  • Added ESP-01 Thermometer Maxim 1-Wire Thermometer (DS1820/DS18S20/DS18B20) Shield support
  • Added CJMCU-407 STM32 board support
  • Added STM32F4VE board support
  • Added Generic STM32F407VG, and STM32F407VE support
  • Added DF Robot Beetle ESP32 support
  • Improved Sockets support
  • Improved JY901 Attitude Angle Sensor support
  • Improved Teensy RTC support
  • Improved Maxim 1-Wire Thermometer (DS1820/DS18S20/DS18B20) support
  • Improved performance of some of the Graphics displays
  • Improved ESP8266 OTA - Programming over WiFi implementation
  • Improved Color support
  • Improved Categories organization
  • Redesigned the Visuino IDE toolbar
  • Significantly improved Build, Upload and Libraries Management in the IDE
  • Improved IDE Speed and user interface

New in Visuino 7.8.3.60 (Jul 16, 2020)

  • Brand new builtin compile and upload support without the need for the Arduino IDE
  • Brand new automatic and manual Platforms and Libraries management
  • Added Initial K210 Maixduino support
  • Added AD7715 ADC support
  • Improved ESP8266 and ESP32 Interrupt support
  • Improved DHT11, DHT21, and DHT22 support
  • Improved STM32 Blue Pill (STM32F103) support
  • Improved IR Remote Transmitter support
  • Changed to use the standard NeoPixels library
  • Added ESPCopter Altitude and Optic Flow Shield
  • Added ESPCopter NeoPixels Ring Shield
  • Added ESPCopter Buzzer Shield
  • Added ESPCopter 4 Way Ranger/Distance Shield
  • Added ESPCopter BME280 Temperature/Humidity/Pressure Shield
  • Improved ESPCopter support
  • Added DSTIKE Deauther Watch V2 support
  • Added ESP8266 Watchdog Timer support
  • Added MakerFocus ESP8266 OLED and Joystick Board support
  • Improved BME280 support
  • Improved ELEGOO SmartCar V2 Shield support
  • Added ESP8266-01 NeoPixels Shield
  • Improved Generic ESP8266 I2C Support
  • Improved ESP8266 D-Duino V2, and D-Duino-B V2 support
  • Improved PLC-X LAB Breakout Support
  • Improved Libraries Management support
  • Improved IDE Speed

New in Visuino 7.8.3.58 (Jun 24, 2020)

  • Brand new builtin compile and upload support without the need for the Arduino IDE
  • Brand new automatic and manual Platforms and Libraries management
  • Added Arduino Nano 33 BLE and Arduino Nano 33 BLE Sense support
  • Added HTTP Client component
  • Added DIY More ESP32 HiGrow support
  • Added DIY More ESP8266 Strong support
  • Added DIY More NANO Strong support
  • Added LIS3MDL 3-Axis Magnetometer
  • Added APDS9960 Proximity, Light, RGB, and Gesture Sensor
  • Added LPS22HB Pressure sensor
  • Added HTS221 Temperature/Humidity sensor
  • Added RemoteXY Sound
  • Added M5Stack Vibration Motor Unit component
  • Added M5Stack Mini Fan Unit component
  • Added M5Stack RS485 to TTL Unit component
  • Improved PID component
  • Improved Speed To Clock/Direction component
  • Improved User Interface
  • Improved Text Splitter support
  • Improved Server Socket implementation
  • Improved MQTT support
  • Improved I2C EEPROM component
  • Improved Arduino DUE support
  • Improved Interrupts support - significantly reduced memory usage, and improved speed
  • Improved RemoteXY LED support
  • Significantly improved Rotary Encoder component
  • Improved EVK-NINA-B1 pin mapping
  • Improved IDE stability
  • Improved Custom Component component
  • Significantly faster IDE when working with big projects
  • Improved IDE stability

New in Visuino 7.8.3.43 (Mar 11, 2020)

  • Added initial CANbus support
  • Added MCP2515 support
  • Added Text Parser/Splitter component
  • Improved ESP32 support
  • Improved Controllino RS485 support
  • Added TTGO-T4 ESP32 (V1.3) support
  • Added ESP8266-01 Shields support
  • Added ESP8266-01 Simple Relay Shield
  • Added ESP8266-01 LC Technology Serial Relay Shield
  • Added ESP8266-01 LC Technology 2 Relays Shield
  • Added ESP8266-01 LC Technology 4 Relays Shield
  • Added TTGO-T18 ESP32 (V1.0) support
  • Added MPU6886 Accelerometer Gyroscope component
  • Added M5Stack ATOM Lite support
  • Added M5Stack ATOM Matrix support
  • Added M5Stack StickC new version support
  • Added BeginText, EndText, SeparatorText, and ElementPrefix properties for the Binary To Text component
  • Improved Nextion Display Multi Page support
  • Added the option to use % without index for the Formatted Text
  • Added M5Stack Laser Transmitter Unit
  • Added M5Stack Optocoupler Unit
  • Added M5Stack Photoresistor Unit
  • Added M5Stack EarthMoisture Unit
  • Added M5Stack StickC Card Keyboard Hat
  • Fixed bug in the Inverse component
  • Improved RemoteXY support
  • Added Most Significant First property to the Make, and Split Structure components
  • Added Timeout Timer component
  • Added Electricity Meter EMH Metering ED300L Serial component
  • Added ILI9341 Display Inverted property
  • Added SPISpeed property to multiple SPI components
  • Improved Formatted Text component significantly reducing memory usage and improving speed
  • Improved Flash storage support
  • Improved Infrared Remote support
  • Improved M5Stack StickC JoyC Hat support
  • Improved Macetech RBM Shades support
  • Improved Clock Modified component
  • Improved MicroSD card support
  • Improved Arduino Micro Pro support
  • Improved ESP8266-01 support
  • Improved IDE stability

New in Visuino 7.8.3.24 (Jan 2, 2020)

  • Added STM32 Nucleo F303RE, and F401RE Boards support
  • Added Analog 2D Change Distance component
  • Added 4D Systems ViSi Gene Displays Smart Controls support
  • Added M5Stack 8 Servos Hat
  • Added M5Stack BugC Robot Hat
  • Added M5Stack JoyC Dual Joystick Hat
  • Added M5Stack StickC Single Joystick Hat
  • Added M5Stack Mini Potentiometer Unit
  • Added Holtek I2C Touch Sensor BS8112A/BS8116A
  • Added YahBoom Piano BBC Micro Bit Carrier Board
  • Added Waveshare ST7735 Display BBC Micro Bit Carrier Board
  • Added SPI RAM component
  • Added SPI Flash component
  • Improved SPI EEPROM, and FRAM support
  • Improved I2C support allowing visual live binding for I2C Address
  • Added MicroSD, EEPROM, RAM, and Flash Storage support
  • Improved RemoteXY support
  • Improved Software Serial
  • Improved Grove support
  • Improved Infrared Remote support
  • Added Text To Char conversion
  • Added Random Quaternion component
  • Improved Random Complex component
  • Improved GPS support
  • Added option to disable Software Reset for the Serial ESP8266
  • Added Enabled property to the Graphics elements
  • Improved Lines and Polygon Graphics support
  • Added Nextion Display Angled Line Element
  • Added ESP8266 WiFi Mac Address (BSSID) Access Point property
  • Improved Micro SD support
  • Added optional SPI speed setting for some of the SPI components
  • Added support for reversed horizontal and vertical order of Maxim LED MAX7219 matrixes
  • Added EEPROM and RAM Storage State element
  • Improved Play Tone component
  • Added Graphics Categories
  • Added Nextion and 4D System element categoreis
  • Added option to send recorded data to the GPS component for processing
  • Added Serial1 support for the ATmega 32U4 boards
  • Added Grove Tilt component
  • Improved ESP32 support
  • Improved Maple Mini support
  • Improved M5Stack Button Unit component
  • Reduced memory useage by some of the components
  • Added more Elegoo Smart Car demos
  • Improved IDE stability

New in Visuino 7.8.3.20 (Dec 2, 2019)

  • Added Quaternions support
  • Added Complex To Analog and Quaternion To Analog components
  • Improved Signal Generator design
  • Added SHT20 Temperature Humidity component
  • Added Arduino Sleep modes
  • Improved Shift Register support
  • Improved M5 Stack Stick C support
  • improved Grove System support
  • Improved NeoPixels support
  • Improved GPS/NavSpark support
  • Improved DHT12 I2C component
  • Improved Time Setting elements
  • Added ESP32 Light Sleep element
  • Added M5Stack Laser Ranging Grove Unit VL53L0X component
  • Added M5Stack Stick C Yun Hat
  • Added M5Stack Stick C ADC ADS1100 Hat
  • Added M5Stack Stick C DAC MCP4725 Hat
  • Added M5Stack Stick C Infrared Thermometer MLX90614 Hat
  • Added M5Stack Stick C Ranging VL53L0X Hat
  • Added M5Stack Extended IO PCA9554 Unit component
  • Added M5Stack Serial GPS Unit component
  • Added M5Stack DAC Unit MCP4725
  • Added Infrared Temperature Sensor Unit MLX90614
  • Added M5Stack ADC Unit ADS1100
  • Added M5Stack Accelerometer Unit ADXL345 component
  • Added M5Stack Color Sensor RGB Unit TCS3472 component
  • Added M5Stack Mini Relay Unit
  • Added M5Stack Mini Button Unit
  • Added M5Stack Keyboard Unit
  • Added M5Stack Makey Capacitive Touch Unit
  • Added Texas Instruments TCA9548A I2C Switch component
  • Added M5Stack I2C Expansion Unit TCA9548A component
  • Added M5Stack RGB LED Unit component
  • Added M5Stack HEX RGB LED Board component

New in Visuino 7.8.3.16 (Nov 8, 2019)

  • Added KocoaFab Orange Board BLE support
  • Added TM1637 and TM1638 support
  • Improved SeeedStudio Grove System support
  • Added BMM150 support
  • Added PCA9554 support
  • Added SeeedStudio Grove System Generic Digital and Analog Input components
  • Added SeeedStudio Grove System Generic Digital Output component
  • Added SeeedStudio Grove System Relay, Button, and Touch components
  • Added M5Stack Dual Button Unit component
  • Added M5Stack Joystick Unit component
  • Added M5Stack PIR Motion Sensor Unit component
  • Added M5Stack StickC Environment Hat

New in Visuino 7.8.3.3 (Aug 13, 2019)

  • Added support for the M5 Stack Basic Core module
  • Added initial support for the PLDuino PLC WiFi Module
  • Significantly Improved RemoteXY mobile device remote support
  • Improved Controllino PLC RS485 support
  • Reduced memory usage by some of the components
  • Improved ESP8266 and ESP32 SSL sockets
  • Some IDE stability improvements

New in Visuino 7.8.3.1 (Jul 26, 2019)

  • Brand new revolutionary code generation design producing extremely efficient low Flash/ROM and especially RAM usage - up to 90% less RAM usage by the generated code, and up to 60 % less Flash/ROM usage
  • Up to 90% execution speed improvement by the generated code
  • A Completely Free Mode of Visuino now available for entry level users and students
  • Added initial Raspberry Pi support
  • Added initial Peguino ESP32 Brick support
  • Added support for ESPCopter
  • Added support for Arduino Every
  • Added NINA-B1 support
  • Added support for Adafruit proportional fonts in the graphics
  • Added Angled Line in the graphics
  • Added support for Centered Rectangles in the graphics
  • Added support for Text and Array in the Structure and Packet components
  • Added CPU Time component
  • Added RemoteXY mobile device remote support
  • Added support for complex arrays
  • Added support for Funduino Joystick Shield
  • Added support for setting IP addresses during execution
  • Added support BMP280 Temperature and Pressure sensor
  • Improved ESP8266 and ESP32 sockets
  • Added a large number of math, array operation, and text components
  • A lot of IDE stability improvements

New in Visuino 7.8.2.291 (Feb 15, 2019)

  • Added initial Bluetooth LE support for ESP32 both Client and Server (Central and Peripheral)
  • Added TTGO-T4, TTGO-TS, and TTGO-T8 ESP32 boards support
  • Added Serial over Bluetooth LE Service
  • Added ESP32 Serial over Bluetooth LE Client
  • Added ESP32 support for MicroSD cards
  • Added Network Time(NTP) component
  • Added Added support for UDP Socket in the Internet Time component
  • Added Broadcast WriteWithoutResponse, Advertise and Indicate options for Bluetooth LE Characteristics
  • Added Square, Square Root, Log, Log10, and Log2 components
  • Added Get Available RAM operation for ESP32 and ESP8266
  • Added SPI1 support for ESP32
  • Added initial Peguino support
  • Added Auto Repeat Button component
  • Reduced memory usage by Integer To Analog, Unsigned To Analog, Text To Analog, Formatted Text, Contains Text, Text Starts With, Text Ends With, Debounce Button, Ultrasonic Ranger, Software Serial, Amplitude Meter, DHT11/21/22/AM2301, MQTT, Bluetooth LE Hearth Rate Service, and MicroSD cards components
  • Reduced memory usage by Get Available RAM operation
  • Reduced memory usage by Sockets
  • Reduced memory usage by the Ethernet and WiFi Shields and modules
  • Reduced memory usage by the Bluetooth LE
  • Improved ESP8266 and ESP32 WiFi support - reduced memory usage, added support for DNS2, improved DNS support, non blocking connect to access points
  • Improved I2C support
  • Improved HID Mouse support
  • Improved Schmitt Trigger support
  • Improved Play Frequency Tone component
  • Improved Black and White OLED and Nokia displays support
  • Some IDE Stability improvements

New in Visuino 7.8.2.290 (Jan 14, 2019)

  • Improved ESP8266 and ESP32 WiFi support
  • Added initial FTDI FT800 Display support
  • Added Interrupts support for the Counter components
  • Improved I2C Arduino to Arduino support
  • Improved Motor Drivers support
  • Improved Servo precision
  • Added option to enable/disable Sequence component elements
  • Improved Yahboom Microbit Robot Carrier Board implementation
  • Improved Digispark and Digispark Pro support
  • Reduced memory usage by the Compare components
  • Reduced memory usage by the ColorToAnalog, and RGBWColorToAnalog component
  • Added RGB LED and RGBW LED components
  • Improved RS485 support for Controllino
  • Added Elegoo Balancing Robot Shield support
  • Added Guoyun ESP-32F Development Board support
  • Large number of performance and stability improvements in the IDE

New in Visuino 7.8.2.261 (Oct 17, 2018)

  • Added support for SparkFun ESP32 Thing
  • Added support for Elegoo Penguin Bot
  • Added support for stm32duino STM32F103C8 Blue Pill
  • Added support for SSD1331 Color OLED Display
  • Added support for Macetech RGB Shades
  • Added support for Maiyout Serial MP3 Player (MY1690-12P/MY1690-16S)
  • Added categorized selection for cotroller boards
  • Added Filtering for component elements
  • Improved Graphics Performance
  • Reduced memory usage and improved speed by many of the graphics displays
  • Improved Circuit Playground support
  • Improved ESP32 BPI-bit support
  • Improved support for the YahBoom Robot
  • Improved EVIVE support
  • Improved performance by some of the components
  • Improved Motor Drivers Components
  • Improved PLDuino support
  • Improved Nextion Display support

New in Visuino 7.8.2.260 (Sep 11, 2018)

  • Improved Encode Date Time component
  • Improved Software Serial component
  • Redesigned GPS component to use up to 90% less memory, and to work better with Software Serial
  • Improved Maxim LED Display graphics
  • A numbed of Visuino IDE improvements

New in Visuino 7.8.2.259 (Aug 21, 2018)

  • Added YahBoom BBC micro:bit robot support
  • Improved BBC micro:bit support
  • Improved NeoPixels support for ESP32
  • Reduced Memory Usage by most Motor Control components
  • Reduced Memory Usage by the WiFi, Ethernet, and GPRS components
  • Reduced memory usage by SPI SSD1306 Display
  • Improved ST7735 Display implementation with reduced memory usage
  • Improved PCA9685 PWM implementation
  • Improved RGBW Ramp To Color component
  • A numbed of Visuino IDE improvements

New in Visuino 7.8.2.257 (Jul 15, 2018)

  • Improved Updates Notifications
  • A large number of small fixes and improvements across the components

New in Visuino 7.8.2.255 (Jul 12, 2018)

  • Improved Visuino IDE user interface
  • Extended unregistered running period from 10 to 15 minutes
  • Added live Online Help
  • Added new Updates Notification
  • Added "Array Insert Items", and "Array Replace Items At Index" components
  • Added support for the DFRobot 5 Buttons LCD Shield
  • Improved Maxim LED Controller support
  • Improved Formatted Text support
  • Improved Frequency Meter Component
  • Improved DFRobot Serial MP3 Player support
  • Improved DS1820 Thermometer support
  • Added support for Outputs for the User Code Component included in the Visuino Pro version available in the G+ Community

New in Visuino 7.8.2.253 (Jun 29, 2018)

  • Improved Copy/Paste functionality
  • Improved Visuino IDE user interface
  • Improved Visuino IDE performance
  • Improved Nextion Display support
  • Improved Formatted Text support
  • Improved Maxim LED Display support

New in Visuino 7.8.2.252 (Jun 16, 2018)

  • Added initial BBC micro:bit support
  • New Visuino JSON based file storage format
  • Improved Copy/Paste functionality
  • Improved Visuino IDE performance
  • Improved BPI:uno32 support
  • Improved MAX31855 Thermocouple support

New in Visuino 7.8.2.246 (May 29, 2018)

  • Added initial chipKIT Max32 support
  • Added BPI:uno32 support
  • Added PlayTone support for ESP32
  • Improved support for the text components on some of the platforms