SuperPinger

SuperPinger is a useful ping software designed to detect and monitor multiple IPs at the same time and send notification messages when their state changes. SuperPinger (Quick Ping Monitor) is able to do two things:

1. Watch states of network line / server / switch / router / work station / other IP devices. As soon as network line break or IP device troubles occur, SuperPinger will soon (within seconds) send warning signals (email, message or sound ) and run specified programs. The related state will also be stored in LOG files.

This function is especially important for a company which owns hundreds of network lines(E1, SDH, DDN, FR, X.25 and so on) /servers. When there exist several lines between a branch and headquarters, usually the communication will not break even only one line works normally.

Under the above situation ,it is very difficult to check the status of backup line , if backup line breaks and is not recovered instantly , it could not take over communication when main line breaks too ,which could result in communication breakup . So for any company even with multi-lines, checking the present status of backup line is very important.

With SuperPinger, You can watch the remote peer's IP address of these lines from the center, when one line break, SuperPinger will send warning signals to administrators within seconds.

2. Watch IP address situation of one or more network address segments and ON/OFF information of computers.

SuperPinger is able to add a block of IP address (as many as 65536 continuous IP address) one time . You can add all the IP address you want to watch to SuperPinger, and find which IP address are used and which IP address are free , and find when computers are ON or OFF.

SuperPinger(registered edition) is able to watch thousands of IP device (number limited only by CPU capability), and send ping detections to all targeted IP device simultaneously and receive responses without affect each other.

All actions of detecting and receiving are carried out simultaneously, which is much better than traditional in-turns method which usually result in long interval-time when there are too many IP devices to be watched. Each watching job can be displayed through graphs , stating : max/min/avg, TTL, lost rate etc.